Skip to the content
2 layers171.5 × 106.7 mmSequencer, the printed circuit board in 3D

PER|FORMER Eurorack Sequencer - Hardware Design Files

Size
171.5 × 106.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
435
Nets
246
Pads
1,188
Tracks, vias
2,450, 256
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
11 Oct 2017
Updated
27 Sep 2019

Overview

Sequencer is an open-source printed circuit board by westlicht, from the westlicht/performer-hardware repository on GitHub. It is a 2-layer board of 171.5 × 106.7 mm with 435 parts on 246 nets, routed with 2,450 tracks and 256 vias.

It is built around the OPA4172ID, 74HCT125PW and 74LV1T34GW, with the R-78E5.0-1.0, DAC8568C and MCP6004-E/P among its other parts. Its parts include 86 resistors, 73 diodes, 49 capacitors, 39 switches and 26 connectors. It belongs with the audio and music boards and the STM32 boards of this library.

Main components

12

README

README.md

PER|FORMER - Hardware Design Files

Overview

This repository contains the hardware design files (KiCad) for the PER|FORMER eurorack sequencer.

For more information on the project go here.

The firmware is hosted in a separate repository here.

Schematic

The schematic is available as a PDF.

Physical dimensions

BoardWidth (mm)Height (mm)
PCB171.45106.68
Frontpanel172.5128.27

The width of the module is 34 HP in eurorack standard.

Bill of materials

The BOM is available as a CSV and HTML. In addition to the parts on the PCB there are a few additional hardware components that are necessary to complete the build, see here.

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Images

Parts

435
QtyValueFootprintReferences
381N4148w_diode:D_SOD-123D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 +22
37TL1105w_switch:TL1105TSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW20, SW21, SW22, SW23, SW24 +21
32LTL1BEKVJNNw_led:LTL1BEKVJNNLED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +16
25100nw_capacitor:C_0603C1, C2, C3, C4, C14, C17, C19, C20, C25, C27, C28, C30, C31, C32, C35, C36 +9
24PJ301BMw_connector:PJ301BMJ10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23, J24, J25 +8
191kw_resistor:R_0603R8, R18, R21, R68, R70, R71, R72, R73, R74, R75, R76, R77, R78, R80, R81, R83 +3
1610kw_resistor:R_0603R2, R5, R6, R7, R19, R20, R36, R49, R50, R55, R58, R61, R66, R67, R79, R82
15100kw_resistor:R_0603R14, R17, R26, R27, R28, R29, R34, R35, R45, R46, R56, R57, R59, R60, R69
11220w_resistor:R_0603R1, R3, R4, R23, R24, R42, R43, R52, R53, R63, R64
1018pw_capacitor:C_0603C11, C12, C15, C16, C33, C34, C37, C38, C41, C42
933kw_resistor:R_0603R10, R11, R12, R13, R31, R32, R38, R39, R48
824kw_resistor:R_0603R22, R25, R41, R44, R51, R54, R62, R65
5MMBT3904Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4, Q5
41nw_capacitor:C_0603C9, C10, C21, C22
42.2uw_capacitor:C_0805C18, C23, C26, C29
4200kw_resistor:R_0603R30, R33, R37, R40
31Mw_resistor:R_0603R9, R15, R16
322uCapacitor_SMD:CP_Elec_5x5.8C5, C24, C40
374HC595Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU12, U13, U14
21N5819HWw_diode:D_SOD-123D3, D4
247uCapacitor_SMD:CP_Elec_6.3x5.7C13, C46
2Beadw_resistor:R_0603L1, L2
2EVQQ2Button_Switch_SMD:SW_SPST_EVQQ2SW8, SW19
2LM1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U7, U10
2OPA4172Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU4, U15
2PJ301CMw_connector:PJ301CM_OFFSETJ1, J2
11uw_capacitor:C_0603C39
122kw_resistor:R_0603R47
174HC165Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU11
174HCT125Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU5
174LV1T34Package_TO_SOT_SMD:SOT-23-5U2
18MHzCrystal:Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm_HandSolderingY1
1DAC8568CPackage_SO:TSSOP-16_4.4x5mm_P0.65mmU8
1JTAGConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_VerticalJP4
1LM4040CIM3-10.0Package_TO_SOT_SMD:SOT-23D1
1MCP6004Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU6
1NHD-3.12-25664UCw_lcd:NHD-3.12-25664UCJP3
1PEC11Rw_rotary_encoder:ALPS_STEC12E08ENC1
1PJS008U-3000w_connector:PJS008U-3000-0JP2
1POWERConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJP5
1R-78E5.0-1.0w_power:R-78E-1.0U16
1STM32F405RGTxPackage_QFP:LQFP-64_10x10mm_P0.5mmU9
1STMPS2151Package_TO_SOT_SMD:SOT-23-5U3
1Serial / BootloaderConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJP6
1USB_Aw_connector:MOLEX_USB_105057JP1
1VO0600TPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU1

The 304 most common of 435 parts.

Similar boards

  • 2 layers88.5 × 56.8 mmGeneric bottom test jig, the printed circuit board in 3D

    Generic bottom test jig

    chickadee-tech/g-test-bot

    Generic Test Jig Bottom for Polystack boards

    49 parts
  • 4 layers193 × 69.9 mmRibbon board, the printed circuit board in 3D

    Ribbon board

    JordanAceto/josh_Ox_ribbon_synth

    ribbon synth for Josh Oxford

    166 parts1CC-BY-4.0
  • 2 layers164.5 × 106 mmElements v02, the printed circuit board in 3D

    Elements v02

    mort13/clandestine_circuitry

    Collection of diy synth projects

    197 parts12GPL-3.0
  • 2 layers84 × 29 mmMain+front, the printed circuit board in 3D

    Main+front

    pioupiou-archive/pioupiou-v1-electronics

    This repository contains the electronic parts of the Pioupiou V1 wind sensor.

    44 parts4
  • 2 layers39.4 × 109.2 mmMiditron back, the printed circuit board in 3D

    Miditron back

    soundslikefrank/miditron

    midi2cv module best to be used with Elektron devices

    144 parts4
  • 2 layers112 × 48 mmRc v1, the printed circuit board in 3D

    Rc v1

    davidlim4318/Baseball-Machine

    MAE 156 Capstone Project Code Files

    30 parts
  • 2 layers69.3 × 66.3 mmEsquematico, the printed circuit board in 3D

    Esquematico

    mathiasscroccaro/IC-Ferramenta-Desenvolvimento

    Esquemáticos, códigos fonte e interface desenvolvidos durante IC

    49 parts
  • 2 layers48.3 × 105.4 mmControl rev3, the printed circuit board in 3D

    Control rev3

    PaulStoffregen/O_C_T41

    Ornament and Crime Optimized With Teensy 4.1

    127 parts164

Questions

How big is the Sequencer PCB?

It measures 171.5 × 106.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sequencer use?

435 parts, built around the OPA4172ID, 74HCT125PW, 74LV1T34GW and R-78E5.0-1.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sequencer KiCad files?

From the westlicht/performer-hardware repository on GitHub, at the commit this page was made from: the board is sequencer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sequencer design in my own project?

Its repository states no licence, so its author keeps all rights: ask westlicht before reusing the design.