Skip to the content
12345678

HCPL-0631

Broadcom LimitedExtended

-40℃~+85℃ 1.5V 15kV/us 2 3.75kV 4.5V~5.5V 5mA 75ns 75ns DC Output enable control、Open-collector output SOT-ALL-8 Logic Output Optoisolators

Part id
broadcom-limited/HCPL-0631
Category
Logic Output Optoisolators
Package
SOT-ALL-8
Pins
8
In stock
11 at JLCPCB (C7284987)
Used on
9 open-source boards

Overview

The HCPL-0631 is a logic Output Optoisolator made by Broadcom Limited in a SOT-ALL-8 package with 8 pins. -40℃~+85℃ 1.5V 15kV/us 2 3.75kV 4.5V~5.5V 5mA 75ns 75ns DC Output enable control、Open-collector output SOT-ALL-8 Logic Output Optoisolators.

PCBKit's library has its KiCad symbol (Isolator:HCPL-0631, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 11 are in stock at JLCPCB (part C7284987). 9 open-source boards in 8 repositories on GitHub use it.

Symbol

1A12C13C24A25GND6VO27VO18VCC
Isolator:HCPL-0631From KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the HCPL-0631
PinNameType
1A1Passive
2C1Passive
3C2Passive
4A2Passive
5GNDPower in
6VO2Open collector
7VO1Open collector
8VCCPower in

Open-source boards using it

9See all 9
  • 4 layers65 × 100 mmAudcalc, the printed circuit board in 3D

    Audcalc

    jonbro/Audcalc

    pocket sized groovebox

    218 parts62MIT
  • 2 layers20.3 × 104.3 mmExpander just back, the printed circuit board in 3D

    Expander just back

    plinkysynth/plinky-expander

    hardware design of a small expander for the plinky synth

    62 parts19
  • 4 layers101.6 × 111.5 mmDaisyplusdac, the printed circuit board in 3D

    Daisyplusdac

    lichen-community-systems/signaletic

    A music signal processing library designed for embedded environments and Web Assembly, in C

    117 parts9MIT
  • 4 layers65 × 100 mmAudcalc, the printed circuit board in 3D

    Audcalc

    sinitsinmike/Audcalc2

    I'm happy with this, but its not 100% feature complete on the firmware side. Its really neat though, and I think you'll like it.

    218 partsMIT
  • 2 layers43.2 × 128.3 mmXyab, the printed circuit board in 3D

    Xyab

    plinkysynth/plinky_public

    a public release of the plinky sw and hw

    78 parts227
  • 4 layers119.4 × 110.4 mmSpace, the printed circuit board in 3D

    Space

    ThisIsNotRocketScience/Eurorack-Modules

    This is not Rocket Science presents: Eurorack modular synthesizer modules!

    249 parts87MIT
  • 4 layers51 × 32 mmRp2350-dual usb, the printed circuit board in 3D

    Rp2350-dual usb

    lichen-community-systems/lichen-eurorack-hardware

    Hardware designs for eurorack synthesizer modules by Lichen Community Systems

    53 parts1
  • 2 layers90.3 × 128.5 mmExpander midi, the printed circuit board in 3D

    Expander midi

    doctea/usb_midi_clocker_hardware

    73 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the HCPL-0631?

Yes. The symbol is Isolator:HCPL-0631 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the HCPL-0631?

SOT-ALL-8, with 8 pins. Its footprint is drawn on this page.

Where is the HCPL-0631 datasheet?

Broadcom Limited publishes it: the Datasheet link on this page opens it.

Where can I order the HCPL-0631?

JLCPCB lists it as part C7284987, with 11 in stock; the sellers' links on this page open their listings.

What can replace the HCPL-0631?

Parts like it in the library: the HCPL-0601-500E by AVAGO, the HCPL-060L-500E by Broadcom Limited, the HCPL-063L-500E by Broadcom Limited and the HCPL-0631-500E by AVAGO. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the HCPL-0631?

9 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.