2 layers121.9 × 86 mm
4 layers33.1 × 64.7 mm
Nrg3
panStamp/kicad15Kicad projects
- Size
- 33.1 × 64.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 135
- Nets
- 119
- Pads
- 478
- Tracks, vias
- 2,162, 289
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 6 Jul 2015
- Updated
- 26 Jul 2018
Overview
Nrg3 is an open-source printed circuit board by panStamp, from the panStamp/kicad repository on GitHub, published under the GPL-2.0 licence. It is a 4-layer board of 33.1 × 64.7 mm with 135 parts on 119 nets, routed with 2,162 tracks and 289 vias.
It is built around the 74LVC1G126Z, BME680 and FT231XS-R, with the MCP1640B-I/MC, TSL2561T and AP7365-30WG among its other parts. Its parts include 64 capacitors, 19 resistors, 15 ICs, 13 inductors and 5 diodes.
Main components
12
74LVC1G126Z
SOT-553-5-40℃~+125℃ 1 1 1.65V~5.5V 200uA 2ns@3.3V,50pF 32mA 32mA 74LVC Tri-State Unidirectional SOT-553-5 Buffers, Drivers, Receivers, Transceivers ROHSDiodes IncorporatedBuffers, Drivers, Receivers, Transceivers
BME680
LGA-8-40℃~+85℃ 0.12hpa 0.6hpa 1.3pa/K 1.71V~3.6V 150nA 30Kpa~1.1bar I2C、SPI Temperature Sensor LGA-8 Pressure Sensors ROHSBosch SensortecPressure Sensors
FT231XS-R
SSOP-20-150mil-40℃~+85℃ 125uA 5V 8.4mA USB 2.0 USB to UART SSOP-20-150mil USB Converters ROHSFTDIUSB Converters
MCP1640B-I/MC
DFN-8(2x3)-40℃~+125℃@(TJ) 1 19uA 2V~5.5V 350mA 500kHz 800mV~5.5V Adjustable Boost Boost Built-in Yes DFN-8(2x3) DC-DC Converters ROHSMicrochip TechnologyDC-DC Converters
TSL2561T
TMB-6-30℃~70℃ 1.35mm 16bit 2.6mm 2.7V~3.6V 3.2uA 3.8mm I2C Light Intensity Low power/sleep mode、Spectral correction/filtering、Adjustable gain control、Interrupt/event trigger TMB-6 Ambient Light Sensors ROHSAdvanced Monolithic SystemsAmbient Light Sensors
AP7365-30WG
SOT-25-40℃~+85℃@(Ta) 1 3V 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-25 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
CC1190
UncategorisedTexas Instruments
MMA8652FCR1
DFN-10(2x2)-40℃~+85℃ 1.95V~3.6V 12bit 5uA Accelerometer I2C X,Y,Z ±8g 运动事件检测 DFN-10(2x2) Accelerometers ROHSNXP SemiconductorsAccelerometers
VL53L1X
LGA-12LGA-12 New Arrivals ROHSSTMicroelectronicsUncategorised
DMG3415U
SOT-23MOSFETsTECH PUBLIC
0402ESDA-MLP1
0402ESD And Surge Protection (TVS/ESD)EatonBSS138L
SOT-23-55℃~+150℃ 1 N-channel 1.5Ω@10V 1V 2.2pF 25pF 400mA 417mW 60V 650pC@4.5V 9.7pF N-Channel SOT-23 MOSFETs ROHSElecSuperMOSFETs
Parts
135| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100n | mysmd:SM0402 | C28, C29, C31, C32, C33, C34, C36, C37, C39, C48, C49, C50, C52, C61 |
| 8 | 100n | SM0402 | C3, C4, C6, C7, C8, C12, C40, C42 |
| 7 | 1u | mysmd:SM0402 | C2, C17, C19, C30, C38, C41, C60 |
| 5 | 12p | mysmd:SM0402 | C53, C54, C55, C57, C59 |
| 5 | 47p | mysmd:SM0402 | C27, C46, C47, C56, C64 |
| 4 | 1.5p | SM0402 | C11, C22, C25, C43 |
| 4 | 10k | mysmd:SM0402 | R5, R6, R9, R16 |
| 3 | 10n | SM0402 | C5, C9, C10 |
| 3 | 10u | mysmd:SM0603S | C13, C16, C21 |
| 3 | LED | mysmd:SM0603S_POL | D4, D5, LED1 |
| 2 | 0 | mysmd:SM0402 | R17, R18 |
| 2 | 10u | SM0603S | C1, C14 |
| 2 | 12n | SM0402 | L8, L9 |
| 2 | 12p | SM0402 | C18, C20 |
| 2 | 18n | SM0402 | L10, L11 |
| 2 | 1k | mysmd:SM0402 | R14, R15 |
| 2 | 20p | mysmd:SM0402 | C44, C45 |
| 2 | 27 | mysmd:SM0402 | R10, R11 |
| 2 | 470 | mysmd:SM0402 | R12, R13 |
| 2 | 600R/200mA | SM0402 | L2, L3 |
| 2 | Conn_01x15 | Pin_Headers:Pin_Header_Straight_1x15 | P1, P2 |
| 2 | DMG3415U | mysmd:SOT23 | Q1, Q3 |
| 1 | 0402ESDA-MLP1 | mysmd:SM0402 | D3 |
| 1 | 1.5n | mysmd:SM0402 | L5 |
| 1 | 100p | SM0402 | C24 |
| 1 | 10n | mysmd:SM0402 | L6 |
| 1 | 1k | SM0402 | R8 |
| 1 | 1n | mysmd:SM0402 | C58 |
| 1 | 1p | SM0402 | C23 |
| 1 | 2.7p | mysmd:SM0402 | C26 |
| 1 | 22u | mysmd:SM0603S | C51 |
| 1 | 26MHz | ABM8 | X1 |
| 1 | 2xAA BATTERY | mymods:KEYSTONE_BAT_AA_HOLDER_02 | BAT1 |
| 1 | 3.3n | mysmd:SM0402 | L13 |
| 1 | 309k | mysmd:SM0402 | R1 |
| 1 | 32.768KHz | EPSON_F-135 | X2 |
| 1 | 3k3 | mysmd:SM0402 | R19 |
| 1 | 3p | mysmd:SM0402 | C62 |
| 1 | 4.7u | mysmd:SM0402 | C35 |
| 1 | 4.7u | Resistors_SMD:R_0805 | L1 |
| 1 | 470nF | SM0402 | C15 |
| 1 | 47k | SM0402 | R7 |
| 1 | 562k | mysmd:SM0402 | R3 |
| 1 | 56k(1%) | SM0402 | R4 |
| 1 | 7.5n | mysmd:SM0402 | L7 |
| 1 | 74LVC1G126 | TO_SOT_Packages_SMD:SOT-23-5 | U7 |
| 1 | 8.2n | mysmd:SM0402 | L12 |
| 1 | 976k | mysmd:SM0402 | R2 |
| 1 | AP7365-3.0 | TO_SOT_Packages_SMD:SOT-23-5 | U4 |
| 1 | B3725 | mysmd:DCC6C | U14 |
| 1 | BME680 | mysmd:BME680 | U9 |
| 1 | BSS138L | mysmd:SOT23 | Q2 |
| 1 | CC1190 | mysmd:VQFN16 | U15 |
| 1 | CC430F5137 | VQFN48 | U1 |
| 1 | EN_EXT_PWR | jumper:SOLDER-JUMPER_1-WAY | JP2 |
| 1 | FB | mysmd:SM0402 | L4 |
| 1 | FT231XS | mysmd:SSOP20 | U12 |
| 1 | Jumper_NC_Dual | jumper:SOLDER-JUMPER_2-WAY | JP1 |
| 1 | LOGO | mysmd:oshlogo | G*** |
| 1 | LY-SK10 | mysmd:LY-SK10 | U13 |
| 1 | MBR120 | SOD-123 | D6 |
| 1 | MCP1640B | TO_SOT_Packages_SMD:SOT-23-6 | U3 |
| 1 | MH-Z19 | mymods:MH-Z19 | U5 |
| 1 | MMA8652FC | DFN-10 | U11 |
| 1 | MicroUSB | mysmd:microUSB_molex | J4 |
| 1 | MicroUSB | microUSB_molex | J1 |
| 1 | NP | mysmd:SM0402 | C63 |
| 1 | PANSTAMPLOGO | mymods:PANSTAMPLOGO | G*** |
| 1 | PWR | Pin_Headers:Pin_Header_Straight_1x03 | J2 |
| 1 | RESET | mysmd:SMT_SWITCH_ADTSM3 | SW1 |
| 1 | SI7021 | mysmd:DFN-6 | U8 |
| 1 | SMA | SMD_SMA_SPECIAL | ANT1 |
| 1 | TSL2561 | mysmd:uDFN-6 | U10 |
| 1 | VL53L1X | mysmd:Optical_LGA12 | U6 |
| 1 | XBEE | mymods:XBee_Pro | U2 |
| 1 | XB_RESET | jumper:SOLDER-JUMPER_1-WAY | JP3 |
| 1 | www.panstamp.com | logo_small | VAL |
More from panStamp/kicad
12- 4 layers81 × 76 mm
- 2 layers113 × 180 mm
- 4 layers33.1 × 64.7 mm
- 2 layers91.9 × 86 mm
- 4 layers81 × 76 mm
- 4 layers81 × 76 mm
- 4 layers75 × 95 mm
- 4 layers50.1 × 70.1 mm
- 4 layers55 × 40 mm
- 4 layers25.4 × 55.8 mm
- 4 layers25.4 × 56.6 mm
Similar boards
- 4 layers140 × 47 mm
- 4 layers57 × 35 mm
- 2 layers75.9 × 85.1 mm
- 4 layers16.5 × 10.9 mm
- 2 layers74.9 × 20.3 mm
Rt soldering iron
kcuzner/rt-soldering-iron
Soldering iron driver board for Weller RT tips. A work in progress. Firmware in rust.
126 parts6 - 4 layers38 × 15 mm
Ruuvilogger reva1
ruuvi/ruuvilogger_hw
You can find RuuviLogger related hardware design files from this repository. Design is almost finished, but not 100% ready. If RuuviLogger project continues, Rev.A version will be probably deprecated.
93 parts5 - 4 layers220 × 111.8 mm
MetSensorSuiteEmbeddedFirmware
Lowcost-Radiosonde-Research-Project/MetSensorSuiteEmbeddedFirmware
This is the source code that runs on the Sensor Suite pico which handles reading from sensors, calculating needed products and building data packets
91 partsBSD-3-Clause - 4 layers50 × 30 mm
CC1101
sneakylizard123-4/CC1101_Module
A simple breakout-style radio module for long-range sub-GHz link without designing an RF front end from scratch.
47 partsCERN-OHL-P-2.0
Questions
How big is the Nrg3 PCB?
It measures 33.1 × 64.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Nrg3 use?
135 parts, built around the 74LVC1G126Z, BME680, FT231XS-R and MCP1640B-I/MC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nrg3 KiCad files?
From the panStamp/kicad repository on GitHub, at the commit this page was made from: the board is panstamp-nrg3/nrg3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nrg3 design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).