Skip to the content
123

BSS138L

ElecSuperExtended

-55℃~+150℃ 1 N-channel 1.5Ω@10V 1V 2.2pF 25pF 400mA 417mW 60V 650pC@4.5V 9.7pF N-Channel SOT-23 MOSFETs ROHS

Part id
elecsuper/BSS138L
Category
MOSFETs
Package
SOT-23
Pins
3
In stock
23,017 at JLCPCB (C5224264)
Used on
17 open-source boards

Overview

The BSS138L is a MOSFET made by ElecSuper in a SOT-23 package with 3 pins. -55℃~+150℃ 1 N-channel 1.5Ω@10V 1V 2.2pF 25pF 400mA 417mW 60V 650pC@4.5V 9.7pF N-Channel SOT-23 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Transistor_FET:BSS138, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 23,017 are in stock at JLCPCB (part C5224264). 17 open-source boards in 11 repositories on GitHub use it.

Symbol

123
Transistor_FET:BSS138From KiCad's library

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

Pinout

3
The pins of the BSS138L
PinNameType
1GInput
2SPassive
3DPassive

Open-source boards using it

17See all 17
  • 12 layers180 × 150 mmMarble, the printed circuit board in 3D

    Marble

    BerkeleyLab/Marble

    Dual FMC FPGA carrier board developed for general purpose use in particle accelerator electronics instrumentation.

    1,006 parts35
  • 4 layers33.1 × 64.7 mmNrg3, the printed circuit board in 3D

    Nrg3

    panStamp/kicad

    Kicad projects

    135 parts15GPL-2.0
  • 2 layers95 × 60 mmOpenCatFlap, the printed circuit board in 3D

    OpenCatFlap

    Alex-ala/OpenCatFlap

    Smart cat flap using Wifi+HTTP to work without a cloud.

    104 parts8
  • 4 layers140 × 47 mmTurpial, the printed circuit board in 3D

    Turpial

    btcven/turpial-hardware

    The hardware of the Turpial device.

    197 parts3
  • 2 layers27 × 60 mmOpenFMS, the printed circuit board in 3D

    OpenFMS

    aasmr/openFMS

    Open-source filament presence and motion sensor for Klipper 3D printers – includes MCU firmware, PCB design, and 3D printable parts.

    41 partsMIT
  • 2 layers73 × 77.5 mmUca dkaiot2-kicad, the printed circuit board in 3D

    Uca dkaiot2-kicad

    LEAT-EDGE/ambient-pcb-dkaiot

    The design also provides empty footprints for several other sensors which are not populated in the Ambient variant: - Light sensor (LITEON LTR-303ALS-01) - MEMS microphone (Knowles SPH0645LM4H) - Indoor air quality…

    184 partsCERN-OHL-P-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the BSS138L?

Yes. The symbol is Transistor_FET:BSS138 and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the BSS138L?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the BSS138L datasheet?

ElecSuper publishes it: the Datasheet link on this page opens it.

Where can I order the BSS138L?

JLCPCB lists it as part C5224264, with 23,017 in stock; the sellers' links on this page open their listings.

What can replace the BSS138L?

Parts like it in the library: the BSS138K by ElecSuper, the BSS138 by ElecSuper, the SI2308A by UMW and the SI2310 by GOODWORK. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BSS138L?

17 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.