Skip to the content
PCBKitNew board
CC1190 on a board, in 3D

CC1190

Texas Instruments

ti/CC1190
Category
Uncategorised
Pins
21

Overview

The CC1190 is an uncategorised made by Texas Instruments with 17 pins.

PCBKit's library has its KiCad symbol (Celestial_RF_Amplifier:TI CC1190, from Altium's library) and its footprint (Package_DFN_QFN:Texas_RGV0016A_VQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm, from KiCad's library), ready for a KiCad board. 7 open-source boards in 5 repositories on GitHub use it.

Symbol

GND1PA_OUT2GND3TR_SW4LNA_IN5HGM6LNA_EN7PA_EN8GND9LNA_OUT10PA_IN11GND12VDD_LNA13BIAS14VDD_PA215VDD_PA116PAD17
Celestial_RF_Amplifier:TI CC1190From Altium's library

Footprint

1234567891011121314151617
Package_DFN_QFN:Texas_RGV0016A_VQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mmFrom KiCad's library

Pinout

17
The pins of the CC1190
PinNameType
1GNDPassive
2PA_OUTPassive
3GNDPassive
4TR_SWPassive
5LNA_INPassive
6HGMInput
7LNA_ENInput
8PA_ENInput
9GNDPassive
10LNA_OUTPassive
11PA_INPassive
12GNDPassive
13VDD_LNAPassive
14BIASPassive
15VDD_PA2Passive
16VDD_PA1Passive
17PADPassive

Open-source boards using it

All 7
  • 4 layers33.1 × 64.7 mmNrg3, the printed circuit board in 3D

    Nrg3

    panStamp/kicad

    Kicad projects

    135 parts15GPL-2.0
  • 4 layers140 × 47 mmTurpial, the printed circuit board in 3D

    Turpial

    btcven/turpial-hardware

    The hardware of the Turpial device.

    197 parts3
  • 4 layers220 × 111.8 mmMetSensorSuiteEmbeddedFirmware, the printed circuit board in 3D

    MetSensorSuiteEmbeddedFirmware

    Lowcost-Radiosonde-Research-Project/MetSensorSuiteEmbeddedFirmware

    This is the source code that runs on the Sensor Suite pico which handles reading from sensors, calculating needed products and building data packets

    91 partsBSD-3-Clause
  • 4 layers50 × 30 mmCC1101, the printed circuit board in 3D

    CC1101

    sneakylizard123-4/CC1101_Module

    A simple breakout-style radio module for long-range sub-GHz link without designing an RF front end from scratch.

    47 partsCERN-OHL-P-2.0
  • 4 layers25.4 × 55.8 mmCb ld, the printed circuit board in 3D

    Cb ld

    panStamp/kicad

    Kicad projects

    31 parts15GPL-2.0
  • 2 layers40 × 30 mmEstacionTerrena, the printed circuit board in 3D

    EstacionTerrena

    dragondgold/CanSat

    Plataforma educativa basada en un satélite CanSat

    65 parts1GPL-3.0
  • 2 layers54 × 54 mmPCB A, the printed circuit board in 3D

    PCB A

    dragondgold/CanSat

    Plataforma educativa basada en un satélite CanSat

    86 parts1GPL-3.0

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/CC1190" title="CC1190 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/CC1190.jpg" alt="CC1190" width="1200" height="900">
A picture that opens the part, for a README
[![CC1190](https://pcbkit.io/embed/parts/ti/CC1190.jpg?size=s)](https://pcbkit.io/parts/ti/CC1190)

Questions

Is there a KiCad symbol and footprint for the CC1190?

Yes. The symbol is Celestial_RF_Amplifier:TI CC1190 and the footprint Package_DFN_QFN:Texas_RGV0016A_VQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What can replace the CC1190?

Parts like it in the library: the INA3221AIRGV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the CC1190?

7 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

1