

Cb ld
Kicad projects
- Size
- 25.4 × 55.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 42
- Pads
- 132
- Tracks, vias
- 531, 59
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 6 Jul 2015
- Updated
- 26 Jul 2018
Overview
Cb ld is an open-source printed circuit board by panStamp, from the panStamp/kicad repository on GitHub, published under the GPL-2.0 licence. It is a 4-layer board of 25.4 × 55.8 mm with 31 parts on 42 nets, routed with 531 tracks and 59 vias.
It is built around the CC1190. Its parts include 17 capacitors, 6 inductors, 2 connectors, 1 resistor and 1 IC.
Main components
1Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 12p | SM0603S | C9, C10, C11, C12, C15 |
| 3 | 100n | SM0603S | C8, C18, C20 |
| 3 | 47p | SM0603S | C6, C7, C13 |
| 2 | CONN_01X14 | myconnectors:pin_array_1x14 | P1, P2 |
| 2 | PANSTAMPLOGO | old_mymods:PANSTAMPLOGO | G***, G*** |
| 1 | 1.5n | SM0603S | L2 |
| 1 | 10n | SM0603S | L3 |
| 1 | 1n | SM0603S | C14 |
| 1 | 1u | SM0603S | C16 |
| 1 | 22u | SM0805 | C5 |
| 1 | 3.3n | SM0603S | L5 |
| 1 | 3k3 | SM0603S | R1 |
| 1 | 3p | SM0603S | C19 |
| 1 | 47p | mysmd:SM0603S | C1 |
| 1 | 6.8n | mysmd:SM0603S | L6 |
| 1 | 7.5n | SM0603S | L4 |
| 1 | ANTENNA | myconnectors:SMA_RightAngle_Tyco | ANT1 |
| 1 | CC1190 | VQFN16 | U4 |
| 1 | FB | SM0603S | L1 |
| 1 | NP | SM0603S | C17 |
| 1 | PANSTAMP_NRG2 | mysmd:PANSTAMP_2 | PS1 |
More from panStamp/kicad
12- 4 layers33.1 × 64.7 mm

- 2 layers121.9 × 86 mm

- 4 layers81 × 76 mm

- 2 layers113 × 180 mm

- 4 layers33.1 × 64.7 mm

- 2 layers91.9 × 86 mm

- 4 layers81 × 76 mm

- 4 layers81 × 76 mm

- 4 layers75 × 95 mm

- 4 layers50.1 × 70.1 mm

- 4 layers55 × 40 mm

- 4 layers25.4 × 55.8 mm

Similar boards
- 4 layers140 × 47 mm

- 4 layers220 × 111.8 mm

MetSensorSuiteEmbeddedFirmware
Lowcost-Radiosonde-Research-Project/MetSensorSuiteEmbeddedFirmware
This is the source code that runs on the Sensor Suite pico which handles reading from sensors, calculating needed products and building data packets
91 partsBSD-3-Clause - 4 layers50 × 30 mm

CC1101
sneakylizard123-4/CC1101_Module
A simple breakout-style radio module for long-range sub-GHz link without designing an RF front end from scratch.
47 partsCERN-OHL-P-2.0 - 2 layers40 × 30 mm

- 4 layers43.4 × 18 mm

Easyduino Atmega Nano
Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards
31 parts755CERN-OHL-P-2.0 - 4 layers78 × 79 mm

- 4 layers31.6 × 26.6 mm

- 4 layers18.2 × 26.2 mm

Questions
How big is the Cb ld PCB?
It measures 25.4 × 55.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Cb ld use?
31 parts, built around the CC1190. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cb ld KiCad files?
From the panStamp/kicad repository on GitHub, at the commit this page was made from: the board is cb-ld/cb-ld.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cb ld design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).