MMA8652FCR1

NXP SemiconductorsExtended

-40℃~+85℃ 1.95V~3.6V 12bit 5uA Accelerometer I2C X,Y,Z ±8g 运动事件检测 DFN-10(2x2) Accelerometers ROHS

Part id: nxp/MMA8652FCR1
Category: Accelerometers
Package: DFN-10(2x2)
Pins: 10
In stock: 0 at JLCPCB (C48024)
Used on: 9 open-source boards

Overview

The MMA8652FCR1 is an accelerometer made by NXP Semiconductors in a DFN-10(2x2) package with 10 pins. -40℃~+85℃ 1.95V~3.6V 12bit 5uA Accelerometer I2C X,Y,Z ±8g 运动事件检测 DFN-10(2x2) Accelerometers ROHS.

PCBKit's library has its KiCad symbol (dk_Motion-Sensors-Accelerometers:MMA8652FCR1, from Digikey) and its footprint (Package_DFN_QFN:DFN-10_2x2mm_P0.4mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C48024). 9 open-source boards in 5 repositories on GitHub use it.

Symbol

dk_Motion-Sensors-Accelerometers:MMA8652FCR1From Digikey

Footprint

Package_DFN_QFN:DFN-10_2x2mm_P0.4mmFrom KiCad's library

Pinout

The pins of the MMA8652FCR1
Pin	Name	Type
1	VDD	Input
2	SCL	Input
3	INT1	Output
4	BYP	Input/output
5	INT2	Output
6	GND	Power in
7	GND	Power in
8	VDDIO	Input
9	GND	Power in
10	SDA	Input/output

Parameters

Acceleration Measurement Range (MAX): ±8g
Accelerometer Sensing Axis: X,Y,Z
Features: Motion event detection
Interface: I2C
Operating Temperature: -40℃~+85℃
Output Bits: 12bit
Sensor Type: Accelerometer
Standby Current: 5uA
Voltage - Supply: 1.95V~3.6V

Order codes

MMA8652FCR1LCSC C48024

Show this part on your page

<iframe src="https://pcbkit.io/embed/parts/nxp/MMA8652FCR1" title="MMA8652FCR1 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

For any web page: the part itself, turned and zoomed by the reader.

Open-source boards using it

9See all 9

4 layers16.5 × 10.9 mm
Simple led watch
kcuzner/led-watch
A miniature ARM-powered LED wristwatch
183 parts98MIT
4 layers33.1 × 64.7 mm
Nrg3
panStamp/kicad
Kicad projects
135 parts15GPL-2.0
2 layers74.9 × 20.3 mm
Rt soldering iron
kcuzner/rt-soldering-iron
Soldering iron driver board for Weller RT tips. A work in progress. Firmware in rust.
126 parts6
4 layers38 × 15 mm
Ruuvilogger reva1
ruuvi/ruuvilogger_hw
You can find RuuviLogger related hardware design files from this repository. Design is almost finished, but not 100% ready. If RuuviLogger project continues, Rev.A version will be probably deprecated.
93 parts5
4 layers81 × 76 mm
Cb flex
panStamp/kicad
Kicad projects
89 parts15GPL-2.0
4 layers26.5 × 57.3 mm
Cb fob
panStamp/kicad
Kicad projects
23 parts15GPL-2.0
4 layers25.4 × 56.6 mm
Cb imu
panStamp/kicad
Kicad projects
31 parts15GPL-2.0
4 layers25.4 × 56.6 mm
Cb minibat
panStamp/kicad
Kicad projects
24 parts15GPL-2.0

Parts like it

Questions

Is there a KiCad symbol and footprint for the MMA8652FCR1?

Yes. The symbol is dk_Motion-Sensors-Accelerometers:MMA8652FCR1 and the footprint Package_DFN_QFN:DFN-10_2x2mm_P0.4mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MMA8652FCR1?

DFN-10(2x2), with 10 pins. Its footprint is drawn on this page.

Where is the MMA8652FCR1 datasheet?

NXP Semiconductors publishes it: the Datasheet link on this page opens it.

Where can I order the MMA8652FCR1?

JLCPCB lists it as part C48024, with 0 in stock; the sellers' links on this page open their listings.

What can replace the MMA8652FCR1?

Parts like it in the library: the MMA8653FCR1 by NXP Semiconductors, the FXLS8964AFR3 by NXP Semiconductors, the FXLS8967AFR3 by NXP Semiconductors and the FXLS8974CFR3 by NXP Semiconductors. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MMA8652FCR1?

9 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.