4 layers33.1 × 64.7 mm
VL53L1X
STMicroelectronicsExtended
LGA-12 New Arrivals ROHS
- Part id
- st/VL53L1X
- Category
- Uncategorised
- Package
- LGA-12
- Pins
- 12
- In stock
- 0 at JLCPCB (C2924337)
- Used on
- 22 open-source boards
Overview
The VL53L1X is an uncategorised made by STMicroelectronics in a LGA-12 package with 12 pins. LGA-12 New Arrivals ROHS.
PCBKit's library has its KiCad symbol (tinkerforge:VL53L1, from Tinkerforge) and its footprint (4ms_Package_QFP:LGA-12_2x2mm_P0.5mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2924337). 22 open-source boards in 16 repositories on GitHub use it.
Symbol
Footprint
Pinout
12| Pin | Name | Type |
|---|---|---|
| 1 | AVDDVCSEL | Input |
| 2 | AVSSVCSEL | Input |
| 3 | GND | Input |
| 4 | GND2 | Input |
| 5 | XSHUT | Input |
| 6 | GND3 | Input |
| 7 | GPIO1 | Input |
| 8 | DNC | Input |
| 9 | SDA | Input |
| 10 | SCL | Input |
| 11 | AVDD | Input |
| 12 | GND4 | Input |
- 2 layers76 × 70.3 mm
Module
valerionew/53xLIDAR
53xLIDAR is a solid state, 16 points lidar, based on ST's VL53L1x sensors
294 parts11 - 2 layers48.4 × 21.7 mm
Panel
CloudyPadmal/CrazyFlieToFDeck
This repository contains KiCAD source files and generated gerber files for CrazyFlie Obstacle Avoidance Sensor Deck.
75 parts4 - 2 layers86 × 85 mm
- 4 layers38 × 74 mm
Stratosdrone
equationstratos/STRATOSDRONES
A 4-layer, 36×70 mm Tello-style portrait controller board for the STRATOSDRONE: chip-down ESP32-P4 (flight + camera + hardware H.264) with an ESP32-C6-MINI-1 Wi-Fi co-processor, IMU / barometer / ToF / optical-flow…
115 parts - 4 layers48 × 52 mm
Cube
Honzaaa45/cube-hologram-pcb
Carte electronique d'un afficheur holographique Pepper's Ghost : CAO KiCad 4 couches entierement generee par du code et verifiee automatiquement
63 partsMIT - 2 layers180 × 56 mm
DBT 4.0
MaxJ02/Death_By_Table
Code for the autonomous RC-car "Death_By_Table", which competed in the YRGO Grand Prix 2023. The code is written for the Arduino Nano which uses the Atmega328p microcontroller.
16 partsMIT - 2 layers70 × 50 mm
Parts like it
8
VL53L0X
LGA-12LGA-12 New Arrivals ROHSSTMicroelectronicsUncategorisedBMA250
LGA-12(2x2)LGA-12(2x2) New Arrivals ROHSBosch SensortecUncategorisedSC7A20
LGA-12_2.0x2.0x0.5P-1LGA-12(2x2x0.5) New Arrivals ROHSHangzhou Silan MicroelectronicsUncategorisedSC7A20TTR
LGA-12(2x2)UncategorisedHangzhou Silan MicroelectronicsKX122-1037
LGA-12LGA-12 New Arrivals ROHSROHM SemiconductorUncategorisedSTK8328-C
LGA-12UncategorisedSENSORTEKBMA220
LGA-12(2x2x0.5)LGA-12(2x2x0.5) New Arrivals ROHSBosch SensortecUncategorisedBMA223
LGA-12LGA-12 New Arrivals ROHSBosch SensortecUncategorised
Questions
Is there a KiCad symbol and footprint for the VL53L1X?
Yes. The symbol is tinkerforge:VL53L1 and the footprint 4ms_Package_QFP:LGA-12_2x2mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the VL53L1X?
LGA-12, with 12 pins. Its footprint is drawn on this page.
Where can I order the VL53L1X?
JLCPCB lists it as part C2924337, with 0 in stock; the sellers' links on this page open their listings.
What can replace the VL53L1X?
Parts like it in the library: the VL53L0X by STMicroelectronics, the BMA250 by Bosch Sensortec, the SC7A20 by Hangzhou Silan Microelectronics and the SC7A20TTR by Hangzhou Silan Microelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the VL53L1X?
22 boards in 16 repositories on GitHub; the most starred are listed on this page, with their KiCad files.