

Lidar main board
Lidar 360 grados utilizando LPC 845
- Size
- 70 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 49
- Pads
- 121
- Tracks, vias
- 251, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 Sep 2024
- Updated
- 1 Mar 2025
Overview
Lidar main board is an open-source printed circuit board by PabloSGomez50, from the PabloSGomez50/proyecto_digitales_II repository on GitHub. It is a 2-layer board of 70 × 50 mm with 29 parts on 49 nets, routed with 251 tracks and 0 vias.
It is built around the AMS1117-3.3 and VL53L1X. Its parts include 8 connectors, 5 capacitors, 5 resistors, 3 ICs and 3 diodes. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
2AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsVL53L1X
LGA-12LGA-12 New Arrivals ROHSSTMicroelectronicsUncategorised
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 120 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R4, R5 |
| 3 | LED | LED_THT:LED_D5.0mm | D1, D2, D3 |
| 2 | 0.1uF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C4, C5 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | 62k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | AS5600 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | Bateria | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | Boton 1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Boton 2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | Boton 3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | HC-06 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | LPC845-BRK | Componentes_Proyecto_Digitales:LPC845-BRK | U1 |
| 1 | Motor | Connector_Molex:Molex_SL_171971-0004_1x04_P2.54mm_Vertical | J8 |
| 1 | Pololu_Breakout_A4988 | Module:Pololu_Breakout-16_15.2x20.3mm | A1 |
| 1 | vl53l1x | Connector_Molex:Molex_SL_171971-0004_1x04_P2.54mm_Vertical | J1 |
More from PabloSGomez50/proyecto_digitales_II
1- 2 layers70 × 50 mm

Similar boards
- 4 layers33.1 × 64.7 mm

- 2 layers76 × 70.3 mm

Module
valerionew/53xLIDAR
53xLIDAR is a solid state, 16 points lidar, based on ST's VL53L1x sensors
294 parts11 - 2 layers48.4 × 21.7 mm

Panel
CloudyPadmal/CrazyFlieToFDeck
This repository contains KiCAD source files and generated gerber files for CrazyFlie Obstacle Avoidance Sensor Deck.
75 parts4 - 2 layers86 × 85 mm

- 4 layers38 × 74 mm

Stratosdrone
equationstratos/STRATOSDRONES
A 4-layer, 36×70 mm Tello-style portrait controller board for the STRATOSDRONE: chip-down ESP32-P4 (flight + camera + hardware H.264) with an ESP32-C6-MINI-1 Wi-Fi co-processor, IMU / barometer / ToF / optical-flow…
115 parts - 4 layers48 × 52 mm

Cube
Honzaaa45/cube-hologram-pcb
Carte electronique d'un afficheur holographique Pepper's Ghost : CAO KiCad 4 couches entierement generee par du code et verifiee automatiquement
63 partsMIT - 2 layers180 × 56 mm

DBT 4.0
MaxJ02/Death_By_Table
Code for the autonomous RC-car "Death_By_Table", which competed in the YRGO Grand Prix 2023. The code is written for the Arduino Nano which uses the Atmega328p microcontroller.
16 partsMIT - 2 layers60 × 60 mm

Questions
How big is the Lidar main board PCB?
It measures 70 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lidar main board use?
29 parts, built around the AMS1117-3.3 and VL53L1X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lidar main board KiCad files?
From the PabloSGomez50/proyecto_digitales_II repository on GitHub, at the commit this page was made from: the board is pcb/lidar_main_board/lidar_main_board.kicad_pcb and its schematic pcb/lidar_dc_motor_board/lidar_dc_motor_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lidar main board design in my own project?
Its repository states no licence, so its author keeps all rights: ask PabloSGomez50 before reusing the design.