2 layers55 × 59 mm
Boards by jbilander
29 boardsOpen-source boards designed in KiCad by jbilander on GitHub, from 26 repositories. A board’s address here is its repository’s there.
- 4 layers38 × 38 mm
- 4 layers64 × 88.6 mm
SF500
jbilander/SF500
Spitfire 500, A low-end 14 MHz Accelerator with IDE and 4/8 MB fast RAM for the Amiga 500.
52 parts82CC-BY-SA-4.0 - 2 layers47 × 50 mm
SDBox
jbilander/SDBox-v2
SDBox-v2 for Amiga, compatible with the new updated card-detect firmware
22 parts53GPL-3.0 - 4 layers34.6 × 25 mm
Amiga DB23 video adapter
jbilander/Amiga_DB23_video_adapter
A PCB for creating Amiga SCART or Amiga VGA cables. You can also use this adapter to feed a new clock to the Amiga via XCLK making your machine true PAL/NTSC switchable
32 parts42CC-BY-SA-4.0 - 2 layers33 × 33 mm
PLCC-84-Plug bottom
jbilander/PLCC-84-plug
A PLCC-84 plug adapter created out of PCBs
5 parts35CC-BY-SA-4.0 - 4 layers25.1 × 81.9 mm
Base64
jbilander/Base64
A 68k carrier board in DIP-64 that takes the iCESugar-Pro-v1.3 FPGA module
34 parts33CC-BY-SA-4.0 - 4 layers78 × 49 mm
ReAgnus MegAChip
jbilander/ReAgnus-MegAChip
A ReAgnus MegaAChip PCB that takes a Gowin FPGA with embedded PSRAM, a PLCC-84 plug and FET level shifters.
57 parts33CC-BY-SA-4.0 - 4 layers111.5 × 83.9 mm
SF2000
jbilander/SF2000
Spitfire 2000, A low-end 42 MHz Accelerator with IDE and 4/8 MB fast RAM for the Amiga 2000 co-pro slot (or A500 through an adapter).
160 parts33CC-BY-SA-4.0 - 2 layers36.1 × 34 mm
SDBox Mini
jbilander/SDBox-Mini
SDBox Mini for Amiga, compatible with the new updated card-detect firmware
29 parts28GPL-3.0 - 4 layers50 × 100 mm
BeamBender
jbilander/BeamBender
An open source flicker fixer PCB for Amiga 1200 and 500
104 parts25CC-BY-SA-4.0 - 2 layers25.4 × 18 mm
A500 IDE LED board
jbilander/A500_IDE_LED_board
Amiga 500 Floppy LED to also Display IDE Activity
10 parts16CC-BY-SA-4.0 - 4 layers52.5 × 60 mm
- 4 layers17.4 × 51.4 mm
- 2 layers80 × 29.5 mm
- 2 layers128 × 25.4 mm
A500 86pin internal adapter
jbilander/A500_Edge_Expansion_adapter
A500 86pin edge connector adapter. Turns the expansion edge into a 86pin female socket inside the A500 case.
3 parts7CC-BY-SA-4.0 - 2 layers51 × 64 mm
LLCB
jbilander/Logic-level-converter-board
A bi-directional high-speed TTL-Compatible level shifter board 5V ⇄ 3V3 for tinkering
18 parts7GPL-2.0 - 4 layers38 × 38 mm
- 2 layers45 × 15 mm
A1200 IDE LED fix board
jbilander/A1200_IDE_LED_fix_board
A small PCB that fixes the IDE Activity LED always lit problem on the A1200.
6 parts5CC-BY-SA-4.0 - 4 layers60.5 × 60 mm
Amiga RGB video splitter
jbilander/Amiga_RGB_video_splitter
Extend your amiga RGB video signal to two display units - screens, monitors, etc, simultaneously
36 parts4CC-BY-SA-4.0 - 4 layers97 × 26.9 mm
Denise to FPGA
jbilander/Denise_to_FPGA
A small adapter-board that connects 12-bit RGB, 14 MHz CLK, PIXELSW and SYNC-signals on Denise to a FPGA-board via a 5V-tolerant buffer.
21 parts4CC-BY-SA-4.0 - 4 layers38 × 38 mm
- 4 layers47 × 50 mm
Par2Ser
jbilander/Par2Ser
A device that bridges the Amiga parallel port to a USB FIFO (FT240X)
42 parts3CC-BY-SA-4.0 - 4 layers91.2 × 89.3 mm
