4 layers17.4 × 51.4 mm
4 layers17.4 × 51.4 mm
ReCIA MAX10
jbilander/ReCIA14A drop in replacement CIA for old Amiga Computers
- Size
- 17.4 × 51.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 175
- Pads
- 379
- Tracks, vias
- 908, 151
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Aug 2024
- Updated
- 19 Jan 2025
Overview
ReCIA MAX10 is an open-source printed circuit board by jbilander, from the jbilander/ReCIA repository on GitHub. It is a 4-layer board of 17.4 × 51.4 mm with 33 parts on 175 nets, routed with 908 tracks and 151 vias.
It is built around the 10M02SCU169I7G, SN74CBT16210DL and AMS1117-3.3. Its parts include 17 capacitors, 5 ICs, 3 resistors, 2 diodes and 1 connector. It belongs with the FPGA and CPLD boards of this library.
Main components
3
10M02SCU169I7G
UBGA-169-40℃~+100℃ 110592bit 125 130 2.85V~3.465V 2000 Integrated temperature sensor MAX 10 UBGA-169 Programmable Logic Device (CPLDs/FPGAs) ROHSIntel/AlteraProgrammable Logic Device (CPLDs/FPGAs)
SN74CBT16210DL
SSOP-48-300mil-40℃~+85℃ 20 250ps 4V~5.5V 5Ω SSOP-48-300mil Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdReCIA
A drop in replacement CIA (8520) for old Amiga Computers
This is WORK IN PROGRESS. If you generate gerbers and order PCBs from this source you are doing so completely at your own risk!.
Current design is based on an intel/altera 10 Max FPGA but this is mostly so we can signal tap and record how a real 8520 behaves. The oscillator on board is 10 MHz and the PLL on the Max 10 can take this clock and make a perfect 28.375 MHz or a 28.636 MHz clock signal which will be nice to base the logic on instead of the E-CLK.
The final design will probably target a LCMXO2-640HC-4SG48C FPGA or a microcontroller such as AVR128DA64 or a RP2350.
When the DIP-version is functional a PLCC-version (for big box Amigas) can be made.
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.01uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12, C13, C14, C15 |
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6, C7, C8, C9 |
| 2 | 0.01uF | Capacitor_SMD:C_0603_1608Metric | C16, C17 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | 2.9k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | D_Small | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 2 | R_Pack04 | ReCIA:RESCAF80P320X160X60-8N | RN1, RN2 |
| 2 | SN74CBT16210 | Package_SO:TSSOP-48_4.4x9.7mm_P0.4mm | U2, U3 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 10M02SCU169 | ReCIA:BGA-169_11.0x11.0mm_Layout13x13_P0.8mm_Ball0.5mm_Pad0.35mm_NSMD | U4 |
| 1 | 33 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 8520_DIP_SOCKET | Package_DIP:DIP-40_W15.24mm | U5 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.00mm:PinHeader_2x03_P2.00mm_Vertical_SMD | J1 |
| 1 | Oscillator_3.2x2.5mm-28.6363MHz | Oscillator:Oscillator_SMD_SeikoEpson_SG8002CE-4Pin_3.2x2.5mm | X1 |
The 31 most common of 33 parts.
More from jbilander/ReCIA
2- 4 layers17.4 × 51.4 mm
Similar boards
- 4 layers38 × 38 mm
- 4 layers78 × 49 mm
ReAgnus MegAChip
jbilander/ReAgnus-MegAChip
A ReAgnus MegaAChip PCB that takes a Gowin FPGA with embedded PSRAM, a PLCC-84 plug and FET level shifters.
57 parts33CC-BY-SA-4.0 - 4 layers52.5 × 60 mm
- 4 layers38 × 38 mm
- 2 layers290.1 × 130 mm
- 2 layers26.2 × 45.5 mm
PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm
Questions
How big is the ReCIA MAX10 PCB?
It measures 17.4 × 51.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ReCIA MAX10 use?
33 parts, built around the 10M02SCU169I7G, SN74CBT16210DL and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ReCIA MAX10 KiCad files?
From the jbilander/ReCIA repository on GitHub, at the commit this page was made from: the board is KiCad/ReCIA-MAX10.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ReCIA MAX10 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jbilander before reusing the design.