2 layers100 × 100 mm
2 layers70 × 100 mm
LED driver
formicidae-tracker/hardware1Hardware repository for the FORT system
- Size
- 70 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 118
- Nets
- 62
- Pads
- 389
- Tracks, vias
- 987, 151
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Jul 2019
- Updated
- 22 May 2026
Overview
LED driver is an open-source printed circuit board by formicidae-tracker, from the formicidae-tracker/hardware repository on GitHub. It is a 2-layer board of 70 × 100 mm with 118 parts on 62 nets, routed with 987 tracks and 151 vias.
It is built around the ATMEGA328PB-AU, TPS92512DGQ and SP1002-02JTG, with the TPS1H100AQPWPRQ1, UA9637ACD and BAT54 among its other parts. Its parts include 42 resistors, 36 capacitors, 9 ICs, 9 diodes and 6 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
10
ATMEGA328PB-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 27 2KB 32KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Touch function TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
TPS92512DGQ
UncategorisedTexas Instruments
SP1002-02JTG
SC-70-516V 2A@8/20us 500nA 5pF 6V 8V Bidirectional IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS SC-70-5 ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)
TPS1H100AQPWPRQ1
HTSSOP-14-40℃~+125℃ 1 4A 5V~40V 80mΩ High Side Switch Short-Circuit Protection(SCP)、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Over Temperature Protection HTSSOP-14 Power Distribution Switches ROHSTexas InstrumentsPower Distribution Switches
UA9637ACD
SOIC-80 0℃~+70℃ 2 4.75V~5.25V 50mA Receiver SOP-8 RS-485 / RS-422 ICs ROHSTexas InstrumentsRS-485 / RS-422 ICs
BAT54
SOT-23200mA 2uA@25V 30V 800mV@100mA Independent SOT-23 Schottky Diodes ROHSFOSANSchottky Diodes
S1621-46R
SMDSMD Accessories - Inductors/Transformers ROHSHarwinAccessories - Inductors/TransformersBSS138L
SOT-23-55℃~+150℃ 1 N-channel 1.5Ω@10V 1V 2.2pF 25pF 400mA 417mW 60V 650pC@4.5V 9.7pF N-Channel SOT-23 MOSFETs ROHSElecSuperMOSFETs
IRF9Z34NPBF
TO-220AB-55℃~+175℃ 1 P-Channel 100mΩ@10V 140pF 19A 2V 35nC 55V 620pF 68W TO-220AB MOSFETs ROHSInfineon TechnologiesMOSFETsPMV48XP,215-VB
SOT-23MOSFETsVBsemi Elec
README
README.mdFORmicidae Tracker (FORT) : Hardware Blueprints and Firmware
The FORmicidae Tracker (FORT) is an advanced online tracking system designed specifically for studying social insects, particularly ants and bees, FORT utilizes fiducial markers for extended individual tracking. Its key features include real-time online tracking and a modular design architecture that supports distributed processing. The project's current repositories encompass comprehensive hardware blueprints, technical documentation, and associated firmware and software for online tracking and offline data analysis.
This repository holds electronic blueprints and firmware source code of the formicidae-tracker project.
Licenses
Files in this repository are licensed under either one of the two following licenses:
- Files under the
ecadfolder, unless specified otherly, are licensed under CERN OSHL v1.2. - All other files, unless specified otherly, are licensed under GNU Lesser General Public License v3.0 or later.
Parts
118| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 4.7uF,50V | Capacitor_SMD:C_1206_3216Metric | C7, C8, C9, C10, C12, C13, C17, C18, C19, C20, C22, C23, C27, C28, C29, C31 |
| 10 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C6, C14, C16, C24, C26, C32, C33, C36 |
| 9 | 100K | Resistor_SMD:R_0603_1608Metric | R12, R19, R26, R29, R31, R32, R35, R36, R40 |
| 6 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R2, R4, R6, R41, R42 |
| 6 | 60V, 2A | Diode_SMD:D_SMB | D1, D2, D3, D4, D5, D6 |
| 4 | 10nF, 50V | Capacitor_SMD:C_0603_1608Metric | C11, C21, C25, C30 |
| 3 | 1.96M | Resistor_SMD:R_0603_1608Metric | R7, R14, R21 |
| 3 | 100uH, 2.5A | FORT:7447709101 | L1, L2, L3 |
| 3 | 10M | Resistor_SMD:R_0603_1608Metric | R8, R15, R22 |
| 3 | 1K | Resistor_SMD:R_0603_1608Metric | R9, R16, R23 |
| 3 | 66.5k | Resistor_SMD:R_0603_1608Metric | R10, R17, R24 |
| 3 | TPS92512 | FORT:PDSO-10-1EP-3x3mm-Pitch0.5mm | U2, U3, U4 |
| 2 | 0.2, 1%, 0.5W | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R13, R20 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R30, R38 |
| 2 | 18pF | Capacitor_SMD:C_0603_1608Metric | C37, C38 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C15, C34 |
| 2 | 267k | Resistor_SMD:R_0603_1608Metric | R11, R18 |
| 2 | 4.7, 3/4W | Resistor_SMD:R_2010_5025Metric | R3, R5 |
| 2 | 4.7mF | Capacitors_THT:CP_Radial_D25.0mm_P10.00mm_SnapIn | C4, C5 |
| 2 | 5566-08A2 | FORT:Molex_MiniFit-JR-5556-08A_2x04x4.20mm_Straight | J1, J3 |
| 2 | 82 | Resistor_SMD:R_0603_1608Metric | R34, R39 |
| 2 | BAT54 | Diode_SMD:D_SOT-23_ANK | D8, D9 |
| 2 | LED HDR | FORT:640454-2 | J5, J6 |
| 2 | S1621-46R | FORT:S1621-46R | JP1, JP2 |
| 2 | SP1002-02JTG | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U8, U9 |
| 1 | .100 2row header | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J4 |
| 1 | 10V | FORT:D_SOT-23_KAN | D7 |
| 1 | 12.7k | Resistor_SMD:R_0603_1608Metric | R37 |
| 1 | 162k | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 2.94K | Resistor_SMD:R_0603_1608Metric | R33 |
| 1 | 20MHz | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | 3.3, 1%, 0.5W | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R27 |
| 1 | 47, 5W | Resistor_THT:R_Radial_Power_L13.0mm_W9.0mm_P5.00mm | R28 |
| 1 | 5566-06A2 | Connectors_Molex:Molex_MiniFit-JR-5556-06A_2x03x4.20mm_Straight | J2 |
| 1 | ATMEGA328PB-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U7 |
| 1 | BSS138L | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | IRF9Z34NPbF | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | LOGO | FORT:UNIL-LOGO_13.8x5.1mm | G*** |
| 1 | LP3985IM5-5.0/NOPB | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U6 |
| 1 | PMV48XP,215 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | TPS1H100AQPWPRQ1 | FORT:HTSSOP-14-1EP_4.4x6.5mm_Pitch0.65mm_ThermalPad | U5 |
| 1 | UA9637 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
The 113 most common of 118 parts.
Questions
How big is the LED driver PCB?
It measures 70 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LED driver use?
118 parts, built around the ATMEGA328PB-AU, TPS92512DGQ, SP1002-02JTG and TPS1H100AQPWPRQ1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LED driver KiCad files?
From the formicidae-tracker/hardware repository on GitHub, at the commit this page was made from: the board is ecad/helios/LED_driver/LED_driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LED driver design in my own project?
Its repository states no licence, so its author keeps all rights: ask formicidae-tracker before reusing the design.
More from formicidae-tracker/hardware
12- 2 layers182.9 × 54.6 mm
- 2 layers84 × 60 mm
- 2 layers55 × 95 mm
- 2 layers80 × 45 mm
- 2 layers120 × 120 mm
- 2 layers65 × 50 mm
- 2 layers80 × 45 mm
- 2 layers57 × 63 mm
- 2 layers55 × 50 mm
- 2 layers72 × 36 mm
- 2 layers100 × 100 mm
Similar boards
- 2 layers114.3 × 114.3 mm
- 4 layers275 × 240 mm
- 2 layers89 × 81 mm
RPi IFaceBoard
Aghosh993/EE_HWDEV_KiCAD
Repository containing all KiCAD schematic, layout and project files for PCB schematic capture and layout projects
76 parts1GPL-3.0 - 2 layers55.9 × 36.8 mm
CANT
bitbane/CANT
The CANT project is designed to allow people to screw around with CAN easily at layers 1/2. All of the stuff that is normally handled by a CAN controller that is baked into sillicon is up for grabs.
15 parts51BSD-3-Clause - 2 layers50.8 × 61 mm
Nui
alvarop/nui
Nui is an IR(evntually also BLE) controlled volume controller for analog audio. It sits between your audio source and speakers and can amplify or reduce the volume using IR commands (and evntually BLE).
53 parts3MIT - 4 layers203.1 × 107.7 mm
Axes controller board
DEDALUS-5x/axes-controller-board
Motherboard schematic design dedicated to motors control
193 partsCERN-OHL-S-2.0 - 2 layers28 × 25 mm
DI2C Endpoint
PereiraO28/Differential-I2C-Endpoint-Board
Converts a standard I2C signal into a Differential I2C signal. This improves signal integrity over long distances while using the same hardware as I2C.
33 partsCERN-OHL-P-2.0 - 2 layers135 × 55 mm
Hp interface
sgenomics/pcbs
There are my personal PCBs... contact me for licensing information.
39 parts2