Hardware repository for the FORT system
- Size
- 72 × 36 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 56
- Pads
- 179
- Tracks, vias
- 418, 45
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 8 Jul 2019
- Updated
- 22 May 2026
Overview
Arke is an open-source printed circuit board by formicidae-tracker, from the formicidae-tracker/hardware repository on GitHub. It is a 2-layer board of 72 × 36 mm with 49 parts on 56 nets, routed with 418 tracks and 45 vias.
It is built around the ATMEGA16M1-AU, MCP2561-E/SN and ADM3251EARW, with the MIC4680-5.0YM, B4B-PH-SM4-TB and CL31A226KAHNNNE among its other parts. Its parts include 16 capacitors, 8 resistors, 6 diodes, 4 ICs and 4 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
12ATMEGA16M1-AU
TQFP-32(7x7)-40℃~+85℃ 10bit 10bit 16KB 16MHz 1KB 2.7V~5.5V 512Byte 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MCP2561-E/SN
SOIC-8-40℃~+125℃ CAN Transceiver SOIC-8 CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversADM3251EARW
SOIC20Isolated, Single-Channel RS-232 Line Driver/ReceiverAnalog DevicesUncategorisedMIC4680-5.0YM
SOIC-8-40℃~+125℃@(TJ) 1 1.3A 200kHz 4V~34V 5V Buck Buck Built-in Fixed No SOIC-8 DC-DC Converters ROHSMicrochip TechnologyDC-DC ConvertersB4B-PH-SM4-TB
SMD,P=2mm-25℃~+85℃ 1 100V 11.95mm 1x4P 2A 2mm 4 4P 6.6mm 7mm Auxiliary Solder Pin Beige Copper alloy PA PH Surface Mount,Vertical Tin UL94V-0 SMD,P=2mm Wire To Board Connector ROHSJSTWire To Board ConnectorCL31A226KAHNNNE
120622uF 25V X5R ±10% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTT491D477K006AT
CASE-D-7343-31(mm)-55℃~+125℃ 400mΩ@100kHz 470uF 6.3V ±10% CASE-D-7343-31(mm) Tantalum Capacitors ROHSKEMETTantalum CapacitorsCRCW06034K87FKEAC
0603-55℃~+155℃ 100mW 4.87kΩ Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface MountB260-13-F(MS)
SMBSchottky DiodesMSKSEMIBAT54
SOT-23200mA 2uA@25V 30V 800mV@100mA Independent SOT-23 Schottky Diodes ROHSFOSANSchottky DiodesCDSOT23-T24CAN
SOT-2317pF 2 24V 250W@8/20us 32V 5.5A@8/20us 50V 80nA Bidirectional IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)150060VS75000
SMD,1.6x0.8mm-40℃~+85℃ 140° 2.4V 20mA 40mcd 570nm 572nm 72mW Discrete Diode Green SMD,1.6x0.8mm LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)
README
README.mdFORmicidae Tracker (FORT) : Hardware Blueprints and Firmware
The FORmicidae Tracker (FORT) is an advanced online tracking system designed specifically for studying social insects, particularly ants and bees, FORT utilizes fiducial markers for extended individual tracking. Its key features include real-time online tracking and a modular design architecture that supports distributed processing. The project's current repositories encompass comprehensive hardware blueprints, technical documentation, and associated firmware and software for online tracking and offline data analysis.
This repository holds electronic blueprints and firmware source code of the formicidae-tracker project.
Licenses
Files in this repository are licensed under either one of the two following licenses:
- Files under the
ecadfolder, unless specified otherly, are licensed under CERN OSHL v1.2. - All other files, unless specified otherly, are licensed under GNU Lesser General Public License v3.0 or later.
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C12, C16 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 2 | 18pF | Capacitor_SMD:C_0603_1608Metric | C10, C11 |
| 2 | 500mA Fuse | Resistor_SMD:R_0603_1608Metric | L1, L3 |
| 2 | JST SH | FORT:JST_PH_B4B-PH-SM4-TB_1x04-1MP_P2.00mm_Vertical | J3, J4 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 16MHz | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | Y1 |
| 1 | 1825910-6 | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | 22uF, 25V | Capacitor_SMD:C_1206_3216Metric | C13 |
| 1 | 470u, 6.3V | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C14 |
| 1 | 4k87 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 4u7, 6.3V | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 68uH, 560mA | FORT:L_Wuerth_WE-PD2 | L2 |
| 1 | ADM3251E | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U1 |
| 1 | ATMEGA16M1-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U2 |
| 1 | B260, 60V, 2A | Diode_SMD:D_SMB | D5 |
| 1 | BAT54 | Diode_SMD:D_SOT-23_ANK | D4 |
| 1 | CDSOT23-T24CAN | Package_TO_SOT_SMD:SOT-23 | D6 |
| 1 | DB9_Female | FORT:LD09S13A4GX00LF | J2 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | M20-8760342 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J1 |
| 1 | MCP2561-E/SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | MIC4680YM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | Term | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | YELLOW | LED_SMD:LED_0603_1608Metric | D3 |
The 44 most common of 49 parts.
More from formicidae-tracker/hardware
12- 2 layers100 × 100 mm

- 2 layers182.9 × 54.6 mm

- 2 layers84 × 60 mm

- 2 layers70 × 100 mm

- 2 layers55 × 95 mm

- 2 layers80 × 45 mm

- 2 layers120 × 120 mm

- 2 layers65 × 50 mm

- 2 layers80 × 45 mm

- 2 layers57 × 63 mm

- 2 layers55 × 50 mm

- 2 layers100 × 100 mm

Similar boards
- 2 layers70 × 80 mm

Cooling control unit
kthfspe-legacy/DeV17-Legacy
A repositrory to save code and pcbs from DeV17
126 parts - 2 layers62.1 × 60.6 mm

Smart home software
azaslavskis/smart-home-software
Software for smart home project (e.g backup)
40 parts1MIT - 2 layers24 × 27.9 mm

Rs232IsoFEC
medo64/Rs232IsoFEC
Framework laptop expansion card exposing isolated RS-232 interface
25 parts2MIT - 2 layers271.8 × 172.7 mm

Peripherl bridge panel
Pongkemon01/Zeabus-Elec-Circuit-Peripheral_bridge
Bridge circuit for several peripheral
1,176 parts - 2 layers65 × 30 mm

CANFDZeroHAT
generationmake/CANFDZeroHAT
Raspberry Pi HAT with Microchip MCP2518FD CAN FD controller
32 parts27 - 4 layers80 × 80.1 mm

Chassis
ut-ras/robomaster_hardware
Welcome! Please read the Wiki page for information on how to set up your computer and an overview of the projects in this repository.
75 parts3 - 2 layers70 × 55 mm

- 4 layers210 × 100 mm

02 Power Board
ad4363/LuX-ray-PCBs
A repository containing KiCad schematic and pcb files for a wireless radiation detector testing interface
115 parts1
Questions
How big is the Arke PCB?
It measures 72 × 36 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Arke use?
49 parts, built around the ATMEGA16M1-AU, MCP2561-E/SN, ADM3251EARW and MIC4680-5.0YM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arke KiCad files?
From the formicidae-tracker/hardware repository on GitHub, at the commit this page was made from: the board is ecad/climate/arke/arke.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arke design in my own project?
Its repository states no licence, so its author keeps all rights: ask formicidae-tracker before reusing the design.