Skip to the content
12345678

MCP2561-E/SN

Microchip TechnologyExtended

-40℃~+125℃ CAN Transceiver SOIC-8 CAN Transceivers ROHS

Part id
microchip/MCP2561-E/SN
Category
CAN Transceivers
Package
SOIC-8
Pins
8
In stock
5,573 at JLCPCB (C87081)
Used on
10 open-source boards

Overview

The MCP2561-E/SN is a CAN Transceiver made by Microchip Technology in a SOIC-8 package with 8 pins. -40℃~+125℃ CAN Transceiver SOIC-8 CAN Transceivers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP2561T-E_SN, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 5,573 are in stock at JLCPCB (part C87081). 10 open-source boards in 5 repositories on GitHub use it.

Symbol

1TXD2VSS3VDD4RXD5SPLIT6CANL7CANH8STBY
EasyEDA_Cloud:MCP2561T-E_SNFrom EasyEDA

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

11
Supply, least
4.5 V · VDD, recommended operating, min · p. 9
Supply, most
5.5 V · VDD, recommended operating, max · p. 9
Supply, absolute maximum
7 V · VDD, absolute maximum · p. 8
Works from
-40 °C · ambient, Extended (E) grade, min · p. 9
Works up to
125 °C · ambient, Extended (E) grade, max · p. 9
Junction, hottest
190 °C · virtual junction temperature, absolute max · p. 8
Takes working
45 mA · VDD, normal mode dominant, VTXD = 0 V, RL = 60 Ω, typical · p. 9
Takes at most
70 mA · VDD, normal mode dominant, VTXD = 0 V, RL = 60 Ω, max · p. 9
Takes asleep
5 µA · VDD, standby, MCP2561, typical · p. 9
Junction to air (8L-SOIC)
149.5 K/W · junction to ambient, typical · p. 16
Data rate, most
1 Mbit/s · CAN bit rate, max · p. 13

Open-source boards using it

10See all 10
  • 2 layers144 × 59.5 mmSteeringmodule, the printed circuit board in 3D

    Steeringmodule

    ZeniteSolar/MDE22

    Esse módulo tem como objetivo controlar a direção da rabeta da embarcação Guarapuvu II, da equipe Zênite Solar do IFSC.

    88 parts2
  • 2 layers100 × 100 mmMaster old, the printed circuit board in 3D

    Master old

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    663 parts1
  • 4 layers170.2 × 79 mmInt brain pcb, the printed circuit board in 3D

    Int brain pcb

    eccentricOrange/int-brain-stm32

    217 parts
  • 2 layers72.4 × 47.3 mm446RMv1.0, the printed circuit board in 3D

    446RMv1.0

    TMPI5235/446RMv1.0

    NHK学生ロボコン2024向けの基板。

    82 parts
  • 2 layers40.6 × 63.5 mmBeginner board, the printed circuit board in 3D

    Beginner board

    olin-electric-motorsports/MK_III-Boards

    Kicad files for our boards

    20 parts4MIT
  • 2 layers72 × 36 mmArke, the printed circuit board in 3D

    Arke

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    49 parts1
  • 2 layers46 × 33 mmAtmega16m1-breakout, the printed circuit board in 3D

    Atmega16m1-breakout

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    25 parts1
  • 2 layers80 × 45 mmCelaeno, the printed circuit board in 3D

    Celaeno

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    73 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP2561-E/SN?

Yes. The symbol is EasyEDA_Cloud:MCP2561T-E_SN and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP2561-E/SN?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP2561-E/SN datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP2561-E/SN?

JLCPCB lists it as part C87081, with 5,573 in stock; the sellers' links on this page open their listings.

What can replace the MCP2561-E/SN?

Parts like it in the library: the TJA1051T/3/1J by NXP Semiconductors, the SN65HVD230D by Texas Instruments, the TJA1042T/1J by NXP Semiconductors and the CA-IF1051S by Chipanalog. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP2561-E/SN?

10 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.