Hardware repository for the FORT system
- Size
- 65 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 77
- Nets
- 34
- Pads
- 188
- Tracks, vias
- 241, 108
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Jul 2019
- Updated
- 22 May 2026
Overview
Nyx is an open-source printed circuit board by formicidae-tracker, from the formicidae-tracker/hardware repository on GitHub. It is a 2-layer board of 65 × 50 mm with 77 parts on 34 nets, routed with 241 tracks and 108 vias.
It is built around the ATTINY202-SSN, THVD8010DDF and LMR36500P3RPER, with the TPS92512HVDGQ, CL32B475KCVZW6E and C1206F184K1RACAUTO among its other parts. Its parts include 22 capacitors, 17 resistors, 4 ICs, 4 diodes and 4 inductors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
12ATTINY202-SSN
SOIC-8-40℃~+105℃ 1.8V~5.5V 10bit 128Byte 20MHz 2KB 6 64Byte 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)THVD8010DDF
TSOT-23-8-40℃~+125℃ 1 1 30Kbps 3V~5.5V 6mA Half-Duplex Transceiver ±16kV TSOT-23-8 RS-485 / RS-422 ICs ROHSTexas InstrumentsRS-485 / RS-422 ICsLMR36500P3RPER
VQFN-HR-9(2x2)-40℃~+150℃@(TJ) 18uA 1V~16V 200kHz~2.2MHz 3.6V~65V 50mA Adjustable Buck Buck Built-in Yes VQFN-HR-9(2x2) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS92512HVDGQ
MSOP-10-EP-40℃~+125℃ 1 2.5A 2MHz 4.5V~60V 5% 65V Buck Built-in DC-DC Over Current Protection、Over-Temperature Protection (OTP) PWM MSOP-10-EP LED Drivers ROHSTexas InstrumentsLED DriversCL32B475KCVZW6E
1210100V 4.7uF X7R ±10% 1210 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTC1206F184K1RACAUTO
1206100V 180nF X7R ±10% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSKEMETMultilayer Ceramic Capacitors MLCC - SMD/SMTKDV12DR300ET
12063.16A 300mΩ 500mW Current Sense Resistor SMD ±0.5% ±50ppm/℃ 1206 Current Sense Resistors / Shunt Resistors ROHSOhmiteCurrent Sense Resistors/Shunt ResistorsSRN8040TA-331M
SMD,8x8mm330uH 700mA 750mA 850mΩ ±20% SMD,8x8mm Power Inductors ROHSBournsPower InductorsSRP1050WA-101M
SMD,11x10mm100uH 2.7A 233mΩ 4A Magnetic Shielded Inductor ±20% SMD,11x10mm Power Inductors ROHSBournsPower InductorsRC0402FR-0710ML
UncategorisedUnknown makerCL32B225KCJSNNE
1210100V 2.2uF X7R ±10% 1210 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTRK73B2ATTD333J
0805-55℃~+155℃ 150V 250mW 33kΩ Thick Film Resistor ±200ppm/℃ ±5% 0805 Chip Resistor - Surface Mount ROHSKOA Speer ElectronicsChip Resistor - Surface Mount
README
README.mdFORmicidae Tracker (FORT) : Hardware Blueprints and Firmware
The FORmicidae Tracker (FORT) is an advanced online tracking system designed specifically for studying social insects, particularly ants and bees, FORT utilizes fiducial markers for extended individual tracking. Its key features include real-time online tracking and a modular design architecture that supports distributed processing. The project's current repositories encompass comprehensive hardware blueprints, technical documentation, and associated firmware and software for online tracking and offline data analysis.
This repository holds electronic blueprints and firmware source code of the formicidae-tracker project.
Licenses
Files in this repository are licensed under either one of the two following licenses:
- Files under the
ecadfolder, unless specified otherly, are licensed under CERN OSHL v1.2. - All other files, unless specified otherly, are licensed under GNU Lesser General Public License v3.0 or later.
Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 5019 | fort:TestPoint_Keystone_5019_Minature | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 6 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C7, C11, C15, C17, C22 |
| 6 | 4.7u | Capacitor_SMD:C_1210_3225Metric | C10, C12, C13, C18, C19, C21 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C4, C16, C20 |
| 2 | 15k | Resistor_SMD:R_0402_1005Metric | R1, R10 |
| 2 | 180n | Capacitor_SMD:C_1206_3216Metric | C1, C9 |
| 2 | 300m | Resistor_SMD:R_1206_3216Metric | R15, R16 |
| 2 | 330u | fort:L_Bourns-SRN8040_8x8.15mm | L3, L4 |
| 2 | 33k | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 1 | 100u | Inductor_SMD:L_Bourns_SRP1050WA | L2 |
| 1 | 10M | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 120 | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 2.05 | Resistor_SMD:R_1206_3216Metric | R8 |
| 1 | 2.2u | Capacitor_SMD:C_1210_3225Metric | C5 |
| 1 | 240k | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 270k | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 3.3m | Capacitor_THT:CP_Radial_D22.0mm_P10.00mm_SnapIn | C14 |
| 1 | 33k | Resistor_SMD:R_0805_2012Metric | R19 |
| 1 | 47k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 560k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 6.8k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 68k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 68u | Inductor_SMD:L_Murata_LQH2MCNxxxx02_2.0x1.6mm | L1 |
| 1 | ATtiny202-SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | CDSOT23-SM712 | Package_TO_SOT_SMD:SOT-23 | D2 |
| 1 | G*** | kibuzzard-67D97FF3 | kibuzzard-67D97FF3 |
| 1 | G*** | kibuzzard-67D9809B | kibuzzard-67D9809B |
| 1 | G*** | kibuzzard-67D980BD | kibuzzard-67D980BD |
| 1 | G*** | kibuzzard-67D9801F | kibuzzard-67D9801F |
| 1 | G*** | kibuzzard-67D98064 | kibuzzard-67D98064 |
| 1 | G*** | kibuzzard-67D980C8 | kibuzzard-67D980C8 |
| 1 | G*** | kibuzzard-67D980FD | kibuzzard-67D980FD |
| 1 | G*** | kibuzzard-67D9807D | kibuzzard-67D9807D |
| 1 | G*** | kibuzzard-67D982C4 | kibuzzard-67D982C4 |
| 1 | JST PH | Connector_JST:JST_PH_B4B-PH-SM4-TB_1x04-1MP_P2.00mm_Vertical | J2 |
| 1 | JST SH | Connector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J3 |
| 1 | JST XH | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J1 |
| 1 | LMR36500P3RPE | fort:Texas_VQFN-HR-9_2.1x2.1mm_P0.5mm | U4 |
| 1 | MMBTA56 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | PMEG6010EXE | fort:Nexperia_CFP3-HP_SOD-123HP | D3 |
| 1 | RD3P01BAT | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | SK3BA | Diode_SMD:D_SMA | D5 |
| 1 | SMAJ51CA | Diode_SMD:D_SMA | D1 |
| 1 | THVD8010 | fort:Texas_SOT-23-8-THIN_1.6x2.9m | U1 |
| 1 | TPS92512HV | fort:Texas_HVSSOP-10-1EP_3x3mm_P0.5mm_EP2.2x3.1mm_ThermalVias | U5 |
The 72 most common of 77 parts.
More from formicidae-tracker/hardware
12- 2 layers100 × 100 mm

- 2 layers182.9 × 54.6 mm

- 2 layers84 × 60 mm

- 2 layers70 × 100 mm

- 2 layers55 × 95 mm

- 2 layers80 × 45 mm

- 2 layers120 × 120 mm

- 2 layers80 × 45 mm

- 2 layers57 × 63 mm

- 2 layers55 × 50 mm

- 2 layers72 × 36 mm

- 2 layers100 × 100 mm

Similar boards
- 2 layers90 × 90 mm

PlasmaTransformer
inceptionev/PlasmaTransformer
This project mainly focuses on creating a driver and 3D-printed support structure that allows for safe continuous operation of a plasma toroid.
86 parts14 - 6 layers150 × 100 mm

- 2 layers53.4 × 45 mm

Temp controlled fan v1 0
Lizzie2105/37degrees_temp_controlled_fan
37 Degrees Inc take home assignment. Include the design files and all documents.
39 parts - 4 layers100 × 100 mm

Smc power
efebasol/StepperMotorController
Rev A — single-motor bench prototype power board. Feeds the driver board (48 V), the stepper motor brake (24 V) and the logic (5 V / 3V3).
104 parts - 4 layers163.8 × 237.4 mm

Modular rack power carrier6-backplane1-rev a
kquinsland/modular-rack-mount-power-system
Hardware, firmware, and host tooling for a modular mini-rack power system.
729 parts - 6 layers91.6 × 50.6 mm

Smokebreak
offgridevices/offgrid-hardware
Open hardware from OffGrid Devices. One folder per board. CERN-OHL-S.
208 partsCERN-OHL-S-2.0 - 4 layers100 × 129.8 mm

- 2 layers148.5 × 90 mm

ZxRebornClock
popovb/zxRebornClock
Часы на ГРИ ИН-14 с синхронизацией времени через интернет
125 partsMIT
Questions
How big is the Nyx PCB?
It measures 65 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nyx use?
77 parts, built around the ATTINY202-SSN, THVD8010DDF, LMR36500P3RPER and TPS92512HVDGQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nyx KiCad files?
From the formicidae-tracker/hardware repository on GitHub, at the commit this page was made from: the board is ecad/nyx/nyx.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nyx design in my own project?
Its repository states no licence, so its author keeps all rights: ask formicidae-tracker before reusing the design.