Skip to the content
2 layers182.9 × 54.6 mmEvaluation Boards, the printed circuit board in 3D

Hardware repository for the FORT system

Size
182.9 × 54.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
171
Nets
30
Pads
630
Tracks, vias
1,528, 8
Pours
16
Routed
Yes
KiCad
KiCad 4
Created
8 Jul 2019
Updated
22 May 2026

Overview

Evaluation Boards is an open-source printed circuit board by formicidae-tracker, from the formicidae-tracker/hardware repository on GitHub. It is a 2-layer board of 182.9 × 54.6 mm with 171 parts on 30 nets, routed with 1,528 tracks and 8 vias.

It is built around the LM2842YQMK, TPS1H100AQPWPRQ1 and BZX84-B4V7. Its parts include 59 capacitors, 45 resistors, 36 connectors, 17 transistors and 10 ICs.

Main components

3

README

README.md

FORmicidae Tracker (FORT) : Hardware Blueprints and Firmware

DOI

The FORmicidae Tracker (FORT) is an advanced online tracking system designed specifically for studying social insects, particularly ants and bees, FORT utilizes fiducial markers for extended individual tracking. Its key features include real-time online tracking and a modular design architecture that supports distributed processing. The project's current repositories encompass comprehensive hardware blueprints, technical documentation, and associated firmware and software for online tracking and offline data analysis.

This repository holds electronic blueprints and firmware source code of the formicidae-tracker project.

Licenses

Files in this repository are licensed under either one of the two following licenses:

  • Files under the ecad folder, unless specified otherly, are licensed under CERN OSHL v1.2.
  • All other files, unless specified otherly, are licensed under GNU Lesser General Public License v3.0 or later.

Parts

171
QtyValueFootprintReferences
40CCapacitors_SMD:C_0603_HandSolderingC5, C5, C5, C5, C5, C5, C5, C5, C10, C10, C10, C10, C10, C10, C10, C10 +24
40RResistors_SMD:R_0603_HandSolderingR6, R6, R6, R6, R6, R6, R6, R6, R10, R10, R10, R10, R10, R10, R10, R10 +24
18Conn_01x03Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mmJ1, J2, J7, J7, J7, J7, J7, J7, J7, J7, J7, J7, J7, J7, J7, J7 +2
16CPCapacitors_SMD:CP_Elec_6.3x7.7C4, C4, C4, C4, C4, C4, C4, C4, C7, C7, C7, C7, C7, C7, C7, C7
16Conn_01x06Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mmJ5, J5, J5, J5, J5, J5, J5, J5, J6, J6, J6, J6, J6, J6, J6, J6
16Q_NMOS_SDGTO_SOT_Packages_SMD:TSOT-23Q2, Q2, Q2, Q2, Q2, Q2, Q2, Q2, Q2, Q2, Q2, Q2, Q2, Q2, Q2, Q2
8STEF01FTRFORT:HTSSOP-14-1EP_4.4x6.5mm_Pitch0.65mm_ThermalPadU3, U3, U3, U3, U3, U3, U3, U3
2Conn_01x04Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mmJ3, J4
1100mHFORT:SRN1060-XXXML1
110kResistors_SMD:R_0603_HandSolderingR3
11uF, 50VCapacitors_SMD:C_0603_HandSolderingC2
1470nF, 50VCapacitors_SMD:C_0603_HandSolderingC1
147uFCapacitors_SMD:C_1206_HandSolderingC3
15.23KResistors_SMD:R_0603_HandSolderingR4
16.81KResistors_SMD:R_0603_HandSolderingR1
1715Resistors_SMD:R_0603_HandSolderingR5
1976Resistors_SMD:R_0603_HandSolderingR2
1BZX84-B4V7Diodes_SMD:D_SOT-23_ANKD2
1D_SchottkyDiodes_SMD:D_SOD-123D1
1LEDLEDs:LED_D3.0mmD3
1LM2842YTO_SOT_Packages_SMD:SOT-23-6U1
1Q_PMOS_GSDTO_SOT_Packages_SMD:SOT-23_HandsolderingQ1
1TPS1H100AQPWPRQ1FORT:HTSSOP-14-1EP_4.4x6.5mm_Pitch0.65mm_ThermalPadU2

More from formicidae-tracker/hardware

12
  • 2 layers100 × 100 mmMaster old, the printed circuit board in 3D

    Master old

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    663 parts1
  • 2 layers84 × 60 mmHelios, the printed circuit board in 3D

    Helios

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    143 parts1
  • 2 layers70 × 100 mmLED driver, the printed circuit board in 3D

    LED driver

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    118 parts1
  • 2 layers55 × 95 mmMaster, the printed circuit board in 3D

    Master

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    90 parts1
  • 2 layers80 × 45 mmZeus, the printed circuit board in 3D

    Zeus

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    86 parts1
  • 2 layers120 × 120 mmLED strip test panelized, the printed circuit board in 3D

    LED strip test panelized

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    82 parts1
  • 2 layers65 × 50 mmNyx, the printed circuit board in 3D

    Nyx

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    77 parts1
  • 2 layers80 × 45 mmCelaeno, the printed circuit board in 3D

    Celaeno

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    73 parts1
  • 2 layers57 × 63 mmNotus, the printed circuit board in 3D

    Notus

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    52 parts1
  • 2 layers55 × 50 mmPhaeton, the printed circuit board in 3D

    Phaeton

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    52 parts1
  • 2 layers72 × 36 mmArke, the printed circuit board in 3D

    Arke

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    49 parts1
  • 2 layers100 × 100 mmHelios LED panel, the printed circuit board in 3D

    Helios LED panel

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    42 parts1

Similar boards

  • 2 layersSmd aio, the printed circuit board in 3D

    Smd aio

    freeDSP/freeDSP-ALLinONE

    All-in-One Version with amp and ADAU1701

    434 parts17
  • 4 layers275 × 240 mmSupervisor, the printed circuit board in 3D

    Supervisor

    BennetLeff/temper

    a breville control freak ++

    440 parts1
  • 4 layers60 × 45 mmHotplate, the printed circuit board in 3D

    Hotplate

    Keyaan-07/Hotplate

    Check out the Project's files on KiCanvas(PCB and Heating element) and Onshape!

    85 partsMIT
  • 2 layers89 × 81 mmRPi IFaceBoard, the printed circuit board in 3D

    RPi IFaceBoard

    Aghosh993/EE_HWDEV_KiCAD

    Repository containing all KiCAD schematic, layout and project files for PCB schematic capture and layout projects

    76 parts1GPL-3.0
  • 2 layers155 × 80 mmESP32Controller, the printed circuit board in 3D

    ESP32Controller

    simon-jouet/ESP32Controller

    ESP32-based 3D printer controller

    171 parts134
  • 2 layers285 × 117 mmTartan, the printed circuit board in 3D

    Tartan

    hsgw/tartan

    60% keyboard made by through-hole parts only

    171 parts98
  • 2 layers285.8 × 123.8 mmGingham, the printed circuit board in 3D

    Gingham

    yiancar/gingham_pcb

    A 60% throughole keyboard inspired by the Plaid

    171 parts86
  • 2 layers248.9 × 120.7 mm16nx, the printed circuit board in 3D

    16nx

    16n-faderbank/16nx

    16nx is a controller for musical instruments. Sixteen faders,MIDI over USB and jack, CV out, and I2C out. Based around RP2040.

    171 parts76

Questions

How big is the Evaluation Boards PCB?

It measures 182.9 × 54.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Evaluation Boards use?

171 parts, built around the LM2842YQMK, TPS1H100AQPWPRQ1 and BZX84-B4V7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Evaluation Boards KiCad files?

From the formicidae-tracker/hardware repository on GitHub, at the commit this page was made from: the board is ecad/helios/eval/Evaluation Boards.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Evaluation Boards design in my own project?

Its repository states no licence, so its author keeps all rights: ask formicidae-tracker before reusing the design.