Hardware repository for the FORT system
- Size
- 80 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 97
- Pads
- 302
- Tracks, vias
- 737, 102
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Jul 2019
- Updated
- 22 May 2026
Overview
Zeus is an open-source printed circuit board by formicidae-tracker, from the formicidae-tracker/hardware repository on GitHub. It is a 2-layer board of 80 × 45 mm with 86 parts on 97 nets, routed with 737 tracks and 102 vias.
It is built around the AT90CAN32-16AU, MCP2561-E/SN and EMC2302-1-AIZL-TR, with the EMC2302-2-AIZL-TR, MIC4680-5.0YM and BSS138 among its other parts. Its parts include 27 resistors, 15 capacitors, 12 diodes, 10 connectors and 6 ICs.
Main components
12AT90CAN32-16AU
TQFP-64(14x14)-40℃~+85℃ 10bit 16MHz 1KB 2.7V~5.5V 2KB 32KB 53 8 Bit AVR Built-in FLASH TQFP-64(14x14) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MCP2561-E/SN
SOIC-8-40℃~+125℃ CAN Transceiver SOIC-8 CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversEMC2302-1-AIZL-TR
MSOP-10-40℃~+125℃ 3V~3.6V SMBus MSOP-10 Brushed DC Motor Drivers ROHSMicrochip TechnologyBrushed DC Motor DriversEMC2302-2-AIZL-TR
MSOP-10-40℃~+125℃ 3V~3.6V 400uA SMBus MSOP-10 Brushed DC Motor Drivers ROHSMicrochip TechnologyBrushed DC Motor DriversMIC4680-5.0YM
SOIC-8-40℃~+125℃@(TJ) 1 1.3A 200kHz 4V~34V 5V Buck Buck Built-in Fixed No SOIC-8 DC-DC Converters ROHSMicrochip TechnologyDC-DC ConvertersBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesB4B-PH-SM4-TB
SMD,P=2mm-25℃~+85℃ 1 100V 11.95mm 1x4P 2A 2mm 4 4P 6.6mm 7mm Auxiliary Solder Pin Beige Copper alloy PA PH Surface Mount,Vertical Tin UL94V-0 SMD,P=2mm Wire To Board Connector ROHSJSTWire To Board ConnectorPMV45EN2R
SOT-23-55℃~+150℃ 1 N-channel 1.115W 17pF 209pF 2V 30V 42mΩ@10V 5.1A 6.3nC@10V SOT-23 MOSFETs ROHSNexperiaMOSFETsCL31A226KAHNNNE
120622uF 25V X5R ±10% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTT491D477K006AT
CASE-D-7343-31(mm)-55℃~+125℃ 400mΩ@100kHz 470uF 6.3V ±10% CASE-D-7343-31(mm) Tantalum Capacitors ROHSKEMETTantalum CapacitorsCRCW06034K87FKEAC
0603-55℃~+155℃ 100mW 4.87kΩ Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface Mount
README
README.mdFORmicidae Tracker (FORT) : Hardware Blueprints and Firmware
The FORmicidae Tracker (FORT) is an advanced online tracking system designed specifically for studying social insects, particularly ants and bees, FORT utilizes fiducial markers for extended individual tracking. Its key features include real-time online tracking and a modular design architecture that supports distributed processing. The project's current repositories encompass comprehensive hardware blueprints, technical documentation, and associated firmware and software for online tracking and offline data analysis.
This repository holds electronic blueprints and firmware source code of the formicidae-tracker project.
Licenses
Files in this repository are licensed under either one of the two following licenses:
- Files under the
ecadfolder, unless specified otherly, are licensed under CERN OSHL v1.2. - All other files, unless specified otherly, are licensed under GNU Lesser General Public License v3.0 or later.
Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 2k2 | Resistor_SMD:R_0603_1608Metric | R13, R14, R17, R18, R23, R24, R25, R26 |
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric | C4, C5, C7, C8, C9, C12, C16 |
| 6 | 47k | Resistor_SMD:R_0603_1608Metric | R1, R2, R19, R20, R21, R22 |
| 5 | CPDT-5V0USP-HF | Package_TO_SOT_SMD:SOT-23 | D7, D8, D9, D10, D11 |
| 4 | 47053-1000 | FORT:Molex_KK-47053-04_04x2.54mm_Straight | J5, J6, J10, J11 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R10, R11 |
| 3 | 1k8 | Resistor_SMD:R_0603_1608Metric | R12, R15, R16 |
| 3 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q3, Q4, Q5 |
| 2 | 18p | Capacitor_SMD:C_0603_1608Metric | C10, C11 |
| 2 | 1N4148WS | Diode_SMD:D_SOD-323F | D1, D2 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | 500mA Fuse | Resistor_SMD:R_0603_1608Metric | L1, L3 |
| 2 | 6410-02A | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J8, J9 |
| 2 | JST SH | FORT:JST_PH_B4B-PH-SM4-TB_1x04-1MP_P2.00mm_Vertical | J1, J2 |
| 2 | PMV45EN | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 16MHz | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | Y1 |
| 1 | 1825910-6 | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | 215079-4 | FORT:Micro-Match_4_TH | J7 |
| 1 | 22uF, 25V | Capacitor_SMD:C_1206_3216Metric | C13 |
| 1 | 470u, 6.3V | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C14 |
| 1 | 4k87 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 4u7, 6.3V | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 68uH, 560mA | Inductor_SMD:L_Wuerth_WE-PD2-Typ-MS | L2 |
| 1 | AT90CAN32-16AU | Package_QFP:TQFP-64_14x14mm_P0.8mm | U2 |
| 1 | B260, 60V, 2A | Diode_SMD:D_SMB | D5 |
| 1 | BAT54 | Diodes_SMD:D_SOT-23_ANK | D4 |
| 1 | CDSOT23-T24CAN | Package_TO_SOT_SMD:SOT-23 | D12 |
| 1 | EMC2302-1-AIZL-TR | Package_SO:MSOP-10_3x3mm_P0.5mm | U5 |
| 1 | EMC2302-2-AIZL-TR | Package_SO:MSOP-10_3x3mm_P0.5mm | U6 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | LP3985IM5-3.3/NOPB | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | M20-8760342 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J4 |
| 1 | MCP2561-E/SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | MIC4680YM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | Term | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | YELLOW | LED_SMD:LED_0603_1608Metric | D6 |
The 81 most common of 86 parts.
More from formicidae-tracker/hardware
12- 2 layers100 × 100 mm

- 2 layers182.9 × 54.6 mm

- 2 layers84 × 60 mm

- 2 layers70 × 100 mm

- 2 layers55 × 95 mm

- 2 layers120 × 120 mm

- 2 layers65 × 50 mm

- 2 layers80 × 45 mm

- 2 layers57 × 63 mm

- 2 layers55 × 50 mm

- 2 layers72 × 36 mm

- 2 layers100 × 100 mm

Similar boards
- 2 layers62.1 × 60.6 mm

Smart home software
azaslavskis/smart-home-software
Software for smart home project (e.g backup)
40 parts1MIT - 2 layers135 × 35 mm

Printhead pcb
Fiberprinter/fiberprinter-electronics
Fiberelectronics Control every pulse, master every micron
78 parts4 - 2 layers45.6 × 73 mm

- 2 layers217.2 × 95.3 mm

- 4 layers65 × 56 mm

- 2 layers70 × 80 mm

Cooling control unit
kthfspe-legacy/DeV17-Legacy
A repositrory to save code and pcbs from DeV17
126 parts - 2 layers229.6 × 158.2 mm

Space banana
obra/space-banana
https://twitter.com/erinbeess/status/1503424797224677376?s=20&t=_vethJano1TXJZ3IsSkWwQ
129 parts2 - 4 layers79 × 56.3 mm

Questions
How big is the Zeus PCB?
It measures 80 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Zeus use?
86 parts, built around the AT90CAN32-16AU, MCP2561-E/SN, EMC2302-1-AIZL-TR and EMC2302-2-AIZL-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zeus KiCad files?
From the formicidae-tracker/hardware repository on GitHub, at the commit this page was made from: the board is ecad/climate/zeus/zeus.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zeus design in my own project?
Its repository states no licence, so its author keeps all rights: ask formicidae-tracker before reusing the design.