

Space banana
https://twitter.com/erinbeess/status/1503424797224677376?s=20&t=_vethJano1TXJZ3IsSkWwQ
- Size
- 229.6 × 158.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 129
- Nets
- 107
- Pads
- 734
- Tracks, vias
- 1,106, 152
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Mar 2022
- Updated
- 14 Mar 2022
Overview
Space banana is an open-source printed circuit board by obra, from the obra/space-banana repository on GitHub. It is a 2-layer board of 229.6 × 158.2 mm with 129 parts on 107 nets, routed with 1,106 tracks and 152 vias.
It is built around the ATMEGA32U4-MU, CC0603KRX5R6BB105 and CC0603JRNPO9BN270, with the CC0805KRX7R0BB103, RR0816P-512-D and V5.5MLA0603NH among its other parts. Its parts include 13 capacitors, 7 resistors, 1 IC, 1 diode and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
12ATMEGA32U4-MU
VQFN-44-EP(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CC0603KRX5R6BB105
060310V 1uF X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTCC0603JRNPO9BN270
060327pF 50V NP0 ±5% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTCC0805KRX7R0BB103
0805100V 10nF X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTRR0816P-512-D
0603-55℃~+125℃ 5.1kΩ 62.5mW 75V Thin Film Resistor ±0.5% ±25ppm/℃ 0603 Chip Resistor - Surface Mount ROHSSusumuChip Resistor - Surface MountV5.5MLA0603NH
06031.27nF@1MHz 100mJ 17.5V 30A 4V 5.5V 8.2V 0603 Varistors ROHSLittelfuseVaristorsRR0816P-103-D
0603-55℃~+125℃ 10kΩ 63mW Thin Film Resistor ±0.5% ±25ppm/℃ 0603 Chip Resistor - Surface Mount ROHSSusumuChip Resistor - Surface MountCC0805KKX7R7BB475
080516V 4.7uF X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMT1N4148W-7-F-CN
SOD-123SOD-123 Switching Diodes ROHSChipNoboSwitching DiodesM20-8760342
SMD,P=2.54mm-40℃~+105℃ 2 2.54mm 2.54mm 2.54mm 250V 3A 5.8mm 6P Black Brass Pin Header Surface Mount,Vertical Tin SMD,P=2.54mm Pin Headers ROHSHarwinPin HeadersPRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)TL3342F160QG/TR
SMD-4P,5.2x5.2SMD-4P,5.2x5.2 Tactile Switches ROHSE-SwitchTactile Switches
Parts
129| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | D_SOD-123 | D_SOD-123 | D_SW_1, D_SW_2, D_SW_10, D_SW_11, D_SW_12, D_SW_13, D_SW_14, D_SW_15, D_SW_16, D_SW_17, D_SW_18, D_SW_19, D_SW_20, D_SW_21, D_SW_22, D_SW_23 +28 |
| 44 | ESC | Keyboardio:MX-KailhClip-1.00u-no-top-ring | SW_1, SW_2, SW_10, SW_11, SW_12, SW_13, SW_14, SW_15, SW_16, SW_17, SW_18, SW_19, SW_20, SW_21, SW_22, SW_23 +28 |
| 9 | TST | TestPoint:TestPoint_Pad_D1.5mm | AREF1, LED_DRIVER_INTB1, LED_DRIVER_SDB1, SCL1, SDA1, UCAP1, UVCC1, XTAL1, XTAL2 |
| 6 | 1uF 10V X5R 10% | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C6, C8 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 27pF | Capacitor_SMD:C_0603_1608Metric | C5, C7 |
| 2 | 27pF DNP | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 2 | 4.7uF 16V X7R | Capacitor_SMD:C_0805_2012Metric | C10, C11 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | V5.5MLA0603NH | Resistor_SMD:R_0603_1608Metric | RV1, RV2 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10nF 100V | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 1N4148 | Diode_SMD:D_SOD-123 | D2 |
| 1 | 330R 5% | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 500K | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | ABM3-16.000 | Keyboardio:ABM3_Crystal_Oscillator | X1 |
| 1 | ARDUINO_MICRO_SHIELD | ArduinoMicro:ARDUINO_MICRO_SHIELD | UArduinoMicro1 |
| 1 | ATMEGA32U4-MU | Keyboardio:TQFP-44_10x10mm_Pitch0.8mm-Plus-QFN_44_7x7mm_Pitch_0.5mm | U1 |
| 1 | BLM31PG391SN1L | Resistor_SMD:R_1206_3216Metric | L1 |
| 1 | ICSP | Keyboardio:Model_01_ICSP_cutout_pins | J1 |
| 1 | ICSP_Test | Keyboardio:Six_Pin_Test_Point | T5 |
| 1 | PRTR5V0U2X | Keyboardio:PRTR5V0U2X | ESD1 |
| 1 | SW_PUSH | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | USB_C_Receptacle | Keyboardio:USB-TYPE-C-MIDMOUNT | USB1 |
Similar boards
- 2 layers458.2 × 116.3 mm

- 2 layers284.3 × 116.2 mm

- 4 layers70 × 70 mm

Blue interface board
BetzDrive/interface-board
Power and signal conditioning board for the Betz Drive system
130 parts5 - 4 layers150 × 100 mm

Project63 BMS DaughterBoard
JacobParent7/FSAE_LSU_BMS
Distributed BMS designed for FSAE around the STM32 microcontroller and BQ79616/BQ79614/BQ79612 precision battery monitor, balancer and integrated protector.
170 parts13 - 4 layers194 × 94 mm

- 2 layers100 × 100 mm

- 4 layers172 × 140.5 mm

- 4 layers20.6 × 74 mm

Suspension accel
meyerAurelius/telemetry-pcb
First iteration of the telemetry PCB for UCalgary BAJA
47 parts
Questions
How big is the Space banana PCB?
It measures 229.6 × 158.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Space banana use?
129 parts, built around the ATMEGA32U4-MU, CC0603KRX5R6BB105, CC0603JRNPO9BN270 and CC0805KRX7R0BB103. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Space banana KiCad files?
From the obra/space-banana repository on GitHub, at the commit this page was made from: the board is space-banana.kicad_pcb and its schematic Key_Matrix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Space banana design in my own project?
Its repository states no licence, so its author keeps all rights: ask obra before reusing the design.