2 layers
WeevilEyeMod
fablabnk/PCB-SummerSchool
A repo to support our printed circuit board design summerschool course
8 parts10
Boards by fablabnk
15 boardsOpen-source boards designed in KiCad by fablabnk on GitHub, from 11 repositories. A board’s address here is its repository’s there.
- 2 layers40.3 × 106 mm
EricaPolivoksEG
fablabnk/EricaPolivoksEG
Recreation of the open-sourced Erica Polivoks Envelope Generator v2.2: https://github.com/erica-synths/diy-eurorack
92 parts4 - 2 layers20 × 106.7 mm
- 2 layers105.7 × 128.5 mm
DaisyDelayHardwareTestRoute
fablabnk/DaisyDelayHardware
This repo documents the hardware design of a Daisy Seed-based Eurorack module called the Daisy Delay and contains the KiCad files for the project.
55 parts3 - 2 layers106 × 128.5 mm
EuroClockMD TwoBoards
fablabnk/HagiwoClockMultiDivide
This is an attempt to make a PCB version of Hagiwo's Clock Multi Divide module.
49 parts3 - 2 layers40.3 × 106 mm
HagiwoDualVCARev2
fablabnk/HagiwoDualVCA
using decoupling caps specified in this verified build: https://github.com/Testbild-synth/HAGIWO055dualvca Hagiwo uses 47uF and 1uF decoupling caps plus extra 1uF on TL074 rails Verified build uses 10uF and 100n
50 parts2 - 2 layers25 × 108.3 mm
HagiwoBuffMult
fablabnk/HagiwoBuffMult
A 2HP THT version of Hagiwo's Buffered Multiple that can operate in 2x3 or 1x6 modes
45 parts1 - 2 layers30 × 106 mm
HagiwoHatNoise
fablabnk/HagiwoHatNoise_THT
5v from Arduino or directly from 5V rail? Patch submodule uses 22uF ceramic decoupling cap instead of 10uF electrolytic
37 parts1 - 2 layers30 × 106 mm
HagiwoKick
fablabnk/HagiwoKick_THT
Place capacitors closer to the Arduino, if that's what we want to supress noise on
37 parts1 - 2 layers128.6 × 40.5 mm
- 2 layers25.5 × 17 mm
3PDT LEDTrueBypass
fablabnk/3PDT_LEDTrueBypass
3PDT switch is inserted into the top side of the PCB Point-to-point wiring from pin headers is done from the bottom side
4 parts - 2 layers29 × 106 mm
DaisyDelayHardware
fablabnk/DaisyDelayHardware
This repo documents the hardware design of a Daisy Seed-based Eurorack module called the Daisy Delay and contains the KiCad files for the project.
49 parts3 - 2 layers120.9 × 128.5 mm
DaisyDelayHardware
fablabnk/DaisyDelayHardware
This repo documents the hardware design of a Daisy Seed-based Eurorack module called the Daisy Delay and contains the KiCad files for the project.
53 parts3 - 2 layers29 × 106 mm
EuroClockMD SingleBoard
fablabnk/HagiwoClockMultiDivide
This is an attempt to make a PCB version of Hagiwo's Clock Multi Divide module.
33 parts3 - 2 layers128.6 × 40.5 mm
