2 layers128.6 × 40.5 mm
2 layers128.6 × 40.5 mm
CutOutVersion
fablabnk/SynthLabBadge1Badge PCB for SynthLab members
- Size
- 128.6 × 40.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 43
- Pads
- 145
- Tracks, vias
- 721, 110
- Pours
- 80
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Apr 2025
- Updated
- 26 Dec 2025
Overview
CutOutVersion is an open-source printed circuit board by fablabnk, from the fablabnk/SynthLabBadge repository on GitHub. It is a 2-layer board of 128.6 × 40.5 mm with 65 parts on 43 nets, routed with 721 tracks and 110 vias.
It is built around the LM358 and CD40106BPWRG-HX. Its parts include 20 resistors, 11 capacitors, 11 connectors, 7 diodes and 2 ICs. It belongs with the audio and music and lEDs and displays boards of this library.
Main components
2
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
CD40106BPWRG-HX
TSSOP-14-40℃~+85℃ 0V~50mV、0V~50mV、0V~50mV 1.5V~3V、3V~6.3V、4V~10.1V 1uA 2V~3.5V、3.7V~7V、4.9V~11V 3.4mA 3.4mA 30ns@15V,50pF 3V~15V 4.95V、9.95V、14.95V 6 CD4 Noise suppression function Schmitt trigger TSSOP-14 Inverters ROHSHANSCHIP semiconductorInverters
README
README.mdA light-to-sound badge-synth based on Dylan B's open-hardware Beam Catcher project and coming out of our weekly SynthLab audio hardware meetups at fablab|nk. The badge is designed to be a first-intro to DIY synthesiser building for new visitors.
Check the PDF build guide.
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2, R5, R7, R8, R9, R10, R12, R13, R14, R15, R16, R17, R18, R19 |
| 9 | 100nF | Library:C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal_Disc3DModel | C2, C3, C4, C5, C6, C7, C8, C9, C10 |
| 6 | 1M | Library:Potentiometer_Runtron_RM-065_Vertical_With3DModel | RV1, RV2, RV4, RV5, RV6, RV7 |
| 6 | LED | Library:LED_D5.0mm_Lowered | D2, D3, D4, D5, D6, D7 |
| 2 | , | ||
| 2 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3, R20 |
| 1 | 1.5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R6 |
| 1 | 100K | Library:Pot_9mm_DShaft_Silkscreen_Courtyard_Only | RV3 |
| 1 | 100K | Library:Faceplate_Hole_Jack_3.5mm_NoPadNumber | RV3 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4 |
| 1 | 1uF | Library:C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal_Disc3DModel | C1 |
| 1 | 22uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C11 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R11 |
| 1 | 5817 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D8 |
| 1 | 9V Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | 9VBatteryClop | Library:9VBatteryClop | BatteryMount |
| 1 | CD40106BPWR | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | Eurorack_Power_10pin_Unshrouded | Library:IDC-Header_2x05_P2.54mm_Vertical_Euro_Power_Striped_ThickerText | J5 |
| 1 | LM358 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | Mix In | Library:EighthInch_PJ398SM_Silkscreen_Courtyard_Only | J3 |
| 1 | Mix In | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Mix_In | Library:Faceplate_Hole_Jack_3.5mm_NoPadNumber | J3 |
| 1 | Out | Library:EighthInch_PJ398SM_Silkscreen_Courtyard_Only | J4 |
| 1 | Out | Library:Faceplate_Hole_Jack_3.5mm_NoPadNumber | J4 |
| 1 | Out | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | Probe In | Library:EighthInch_PJ398SM_Silkscreen_Courtyard_Only | J2 |
| 1 | Probe In | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Probe In | Library:Faceplate_Hole_Jack_3.5mm_NoPadNumber | J2 |
| 1 | Vol Pot | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
The 63 most common of 65 parts.
More from fablabnk/SynthLabBadge
1Similar boards
- 2 layers132.1 × 45.7 mm
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers68.8 × 53.6 mm
ZArduino
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
46 parts269 - 2 layers152 × 88 mm
RFBitBangSMT
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
271 parts222 - 2 layers118 × 103.5 mm
- 2 layers113 × 62.2 mm
FullScope
tvlad1234/pillScopePlus
Oscilloscope based around the STM32F401 Black Pill and a color LCD screen
15 parts165Apache-2.0 - 2 layers75.2 × 61.1 mm
- 2 layers144.1 × 182.2 mm
SHVC CPU-01
starlightk7/OpenSFC
OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console
498 parts114CERN-OHL-S-2.0 - 2 layers100 × 85 mm
Questions
How big is the CutOutVersion PCB?
It measures 128.6 × 40.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CutOutVersion use?
65 parts, built around the LM358 and CD40106BPWRG-HX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CutOutVersion KiCad files?
From the fablabnk/SynthLabBadge repository on GitHub, at the commit this page was made from: the board is BuildGuide/CutOutVersion.kicad_pcb and its schematic SynthLabBadge-backups/SynthLabBadge-2025-06-18_193505/SynthLabBadge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CutOutVersion design in my own project?
Its repository states no licence, so its author keeps all rights: ask fablabnk before reusing the design.