Skip to the content
2 layers40.3 × 106 mmEricaPolivoksEG, the printed circuit board in 3D

Recreation of the open-sourced Erica Polivoks Envelope Generator v2.2: https://github.com/erica-synths/diy-eurorack

Size
40.3 × 106 mm
Copper layers
2
Thickness
1.6 mm
Parts
92
Nets
52
Pads
238
Tracks, vias
843, 120
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
27 Jul 2024
Updated
4 Jan 2025

Overview

EricaPolivoksEG is an open-source printed circuit board by fablabnk, from the fablabnk/EricaPolivoksEG repository on GitHub. It is a 2-layer board of 40.3 × 106 mm with 92 parts on 52 nets, routed with 843 tracks and 120 vias.

Its parts include 51 resistors, 14 diodes, 9 transistors, 7 capacitors and 5 connectors. It belongs with the audio and music boards of this library.

README

README.md

Build Notes

  • 2N3094 and 2N3096 have been abbreviated to 4 and 6 respectively on silkscreening
  • only place NU 39K resistor if requiring -5V ... +5V output on INV EG OUT (presume otherwise get 0-10V)
  • TP labels on schematic could actually be test points on the original PCB - check!

TODO

TODO: check which DPDT footprint and remove "not verified" from layout - waiting on component DONE: fully double check schematic against original DONE: check IDC power pins & keying - stripe should be to -12V rail DONE: check inverting (-) and non-inverting inputs (+) on TL074 in schematic by comparing to pinout DONE: redo BOM - check we have 2.7k resistor! No, just 2.9K DONE: are jacks switched/normalled? Yes pin 3 is engaged instead of pin 2 when the jack in unplugged DONE: do not mix NPN (2N3904) and PNP (2N3906) DONE: check diameter of radial caps DONE: removed TP labels from schematic, can only presume they are useless! DONE: removed pro power features: polyfuses, reverse polarity protection and inductors DONE: LED orientation check DONE: replaced R38 with 2,7k resistor. When 2.2 used and EG OUT is connected to certain VCAs, the looping may stop

Parts

92
QtyValueFootprintReferences
13100kLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR5, R6, R10, R12, R15, R21, R24, R26, R27, R38, R39, R47, R48
121N4148Library:D_DO-35_SOD27_P7.62mm_Horizontal_Widened_No_KD1, D2, D3, D4, D5, D6, D7, D8, D12, D13, D14, D15
62N3904Library:TO-92L_Inline_WiderQ1, Q2, Q3, Q4, Q5, Q6
510kLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR4, R8, R16, R28, R33
40.1uFCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC1, C3, C5, C6
31M ALibrary:Pot_9mm_DShaft_RemovedPins4_5RV1, RV2, RV3
3200Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR1, R2, R3
320kLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR11, R13, R22
32N3906Library:TO-92L_Inline_WiderQ7, Q8, Q9
3470Library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR37, R41, R44
347kLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR29, R42, R50
22.7kLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR17, R31
23.3kLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR40, R46
233kLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR35, R36
247uFx25VCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC2, C4
25.1kLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR14, R23
2560kLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR7, R49
256kLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR30, R51
2LEDPCM_4ms_LED:LED_3mm_C1A2D11, D18
11.8kLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR32
1100k ALibrary:Pot_9mm_DShaft_RemovedPins4_5RV4
1150kLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR20
115kLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR18
11MLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR25
1220kLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR43
122kLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR45
139kLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR9
14.7uFx16VCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC7
1470kLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR19
1EG OUTLibrary:EighthInch_PJ398SM_3mmNPTHJ5
1Eurorack_Power_10pin_UnshroudedLibrary:IDC-Header_2x05_P2.54mm_Vertical_Euro_Power_Striped_ThickerTextJ3
1GATE DELAY OUTLibrary:EighthInch_PJ398SM_3mmNPTHJ4
1GATE INLibrary:EighthInch_PJ398SM_3mmNPTHJ1
1INV EG OUTLibrary:EighthInch_PJ398SM_3mmNPTHJ2
1NU 39kLibrary:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal_WidenedR34
1SW_DPDT_x2Library:Switch_Toggle_DPDT_MS202SW1
1TL074Package_DIP:DIP-14_W7.62mm_SocketU1

Similar boards

  • 2 layers102.4 × 211.3 mmHaxophone001, the printed circuit board in 3D

    Haxophone001

    cardonabits/haxo-hw

    Haxophone, an electronic musical instrument that resembles a saxophone

    92 parts674
  • 2 layers40.6 × 110 mmEuropi surface mount, the printed circuit board in 3D

    Europi surface mount

    Allen-Synthesis/EuroPi

    EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

    92 parts584CC0-1.0
  • 2 layers142.5 × 101 mmHillside46, the printed circuit board in 3D

    Hillside46

    mmccoyd/hillside

    Family of split ergonomic keyboards with three rows of six or five keys and a generous thumb arc

    92 parts448MIT
  • 2 layers217.6 × 68.1 mmKeezyboost40, the printed circuit board in 3D

    Keezyboost40

    ChrisChrisLoLo/keezyboost40

    4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware

    92 parts202CC-BY-SA-4.0
  • 2 layers39 × 40 mmMdb ai bridge esp32s3, the printed circuit board in 3D

    Mdb ai bridge esp32s3

    nodestark/mdb-esp32-cashless

    ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT

    92 parts190MIT
  • 2 layers227.5 × 87.4 mmWizza MX VIK, the printed circuit board in 3D

    Wizza MX VIK

    AlaaSaadAbdo/battoota

    Keyboards

    92 parts188
  • 2 layers120 × 70 mmEdrumulus 3hhh, the printed circuit board in 3D

    Edrumulus 3hhh

    corrados/edrumulus

    Open Source E-Drum Trigger Module

    92 parts163GPL-2.0
  • 2 layers93.9 × 80.7 mmFroggyswadge, the printed circuit board in 3D

    Froggyswadge

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    92 parts114

Questions

How big is the EricaPolivoksEG PCB?

It measures 40.3 × 106 mm and has 2 copper layers, 1.6 mm thick.

What parts does the EricaPolivoksEG use?

92 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the EricaPolivoksEG KiCad files?

From the fablabnk/EricaPolivoksEG repository on GitHub, at the commit this page was made from: the board is Erica_Polivoks_EG.kicad_pcb and its schematic Erica_Polivoks_EG.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the EricaPolivoksEG design in my own project?

Its repository states no licence, so its author keeps all rights: ask fablabnk before reusing the design.