Skip to the content

Radio and wireless

4,012 boards
  • 2 layers50 × 50 mmPlantbot core, the printed circuit board in 3D

    Plantbot core

    plantbot/core_pcb

    A WiFi powered environmental sensor board for your house plants & hydroponic systems

    55 parts9AGPL-3.0
  • 2 layers70 × 31 mmRFNoiseSource, the printed circuit board in 3D

    RFNoiseSource

    profdc9/RFNoiseSource

    A RF noise source with about 2 GHz bandwidth

    58 parts9
  • 2 layers100 × 100 mmSdr transmitter, the printed circuit board in 3D

    Sdr transmitter

    rwth-afu/sdr-transmitter

    Network connected standalone SDR transmitter for the 70cm band with 16W output power

    53 parts9
  • 2 layers117 × 68 mmIPDS SensorNode, the printed circuit board in 3D

    IPDS SensorNode

    SanTiwari07/PotHoleDetection

    Low-cost pothole detector: YOLOv8 + ESP32 + accelerometer. Logs a pothole only if the camera sees it AND the car feels it, with GPS & severity. Try it in Colab.

    14 parts9MIT
  • 4 layers95.9 × 90.2 mmSFUSat Radio, the printed circuit board in 3D

    SFUSat Radio

    SFUSatClub/CubeSat-Radio

    Cubesat comms module designed for the Canadian Satellite Design Challenge

    281 parts9
  • 2 layers52 × 59 mmBluetoothPedal Main, the printed circuit board in 3D

    BluetoothPedal Main

    skngh/RidgeField

    Bluetooth guitar pedal using the Daisy Seed. Sends controls from a guitar mounted box to the enclosure on your pedalboard.

    40 parts9MIT
  • 2 layers63.5 × 36.5 mmSofTub, the printed circuit board in 3D

    SofTub

    steve1066d/softub-wifi

    An adapter board for Softub that provides wifi access, along with other features

    9 parts9GPL-2.0
  • 2 layers228.6 × 78.7 mmPlonck, the printed circuit board in 3D

    Plonck

    swampmonster/plonck

    An attempt at making a planck-compatible pcb with bluetooth

    132 parts9
  • 4 layers60 × 60 mmCLAS Combo Breakout, the printed circuit board in 3D

    CLAS Combo Breakout

    takuhoTech/CelestNavi-Combo

    Ready-to-use GNSS+CLAS receiver with integrated loop antenna

    87 parts9MIT
  • 2 layers80 × 100 mmDIY AM FM Radio Receiver with CXA1019S, the printed circuit board in 3D

    DIY AM FM Radio Receiver with CXA1019S

    TeknoTrek/DIY-AM-FM-Radio-Receiver-with-CXA1019S

    This repo contains open-source KiCad PCB designs for a DIY AM/FM radio receiver using the Sony CXA1019S IC. Perfect for electronics beginners! 🔹 Key Features: Dual-band (AM+FM) receiver schematic Optimized PCB…

    48 parts9
  • 2 layers95 × 60 mmOpenCatFlap, the printed circuit board in 3D

    OpenCatFlap

    Alex-ala/OpenCatFlap

    Smart cat flap using Wifi+HTTP to work without a cloud.

    104 parts8
  • 2 layers64.8 × 38.1 mmESP RS232, the printed circuit board in 3D

    ESP RS232

    anlumo/ESP6288-RS232

    Using the ESP8266 as a WiFi-to-RS232 adapter

    18 parts8BSD-2-Clause
  • 2 layers76 × 126 mmAllotmentSenderPCB, the printed circuit board in 3D

    AllotmentSenderPCB

    briandorey/pi-pico-lora-soil-monitor

    Raspberry Pi Pico, LoRaWAN & Home Assistant remote soil monitoring

    23 parts8MIT
  • 2 layers35 × 20 mmBpf 100mhz lc, the printed circuit board in 3D

    Bpf 100mhz lc

    cholan2100/rf-agent

    Containerized Linux engineering platform for automated RF/microwave design, KiCad 10, openEMS, Qucs-S, FreeCAD, and AI-driven hardware synthesis.

    6 parts8
  • 2 layers93 × 20 mmWiFi VFD, the printed circuit board in 3D

    WiFi VFD

    ciisaichan/WiFi-VFD

    开源的ESP8266驱动VFD屏电路,支持BiliBili粉丝数、时间、温度、湿度

    23 parts8MIT
  • 2 layers72.8 × 32 mmMicro fm radio, the printed circuit board in 3D

    Micro fm radio

    dilshan/rda5807-fm-radio-module

    RDA5807M based stereo FM radio receiver

    56 parts8MIT
  • 2 layers59.7 × 73 mmPico LoRa, the printed circuit board in 3D

    Pico LoRa

    ElektorLabs/210047-LoRa-with-the-Raspberry-Pi-Pico

    Raspberry Pi Pico with a RFM95 and DS18B20

    42 parts8
  • 4 layers21.2 × 70.5 mmLora micronode, the printed circuit board in 3D

    Lora micronode

    fire219/spearmintastic

    Self-enclosed, pocket-sized Meshtastic node

    10 parts8CERN-OHL-P-2.0
  • 4 layers40 × 22 mmRgba, the printed circuit board in 3D

    Rgba

    fu5ha/rgba

    Reasonably Good Bluetooth Audio - A tiny, inline Bluetooth audio receiver for IEMs.

    73 parts8
  • 2 layers65 × 56 mmB33rn4ryCounterPCB, the printed circuit board in 3D

    B33rn4ryCounterPCB

    Geraffel-Village/Beernary

    Hard- & software stack for authentication, authorization and accounting of your private beer tap via RFID tokens. Created by the Geraffel gang, it runs reliably on very simple and cheap hardware.

    15 parts8GPL-2.0
  • 2 layers100.1 × 100.5 mmSDR Reciever, the printed circuit board in 3D

    SDR Reciever

    greenjacketgirl/SDR_Receiver

    This project is an attempt at designing and building a Software Defined Radio receiver that has the capabilities of listening to frequencies ranging from 500kHz to 50MHz utlizing the board designed, a sound card, and…

    176 parts8
  • 4 layers51.6 × 60.6 mmLoRaPowerBox, the printed circuit board in 3D

    LoRaPowerBox

    h0lad/LoRaPowerBox

    The LoRaPowerBox combines the Heltec HT-CT62 module (ESP32C3 + Semtech SX1262) with a TI BQ25628E wide-range charger. Main target is IoT projects that deliver data over LoRa and/or Wifi utilizing solar power.

    54 parts8CERN-OHL-S-2.0
  • 2 layers75 × 55 mmWellfed bench, the printed circuit board in 3D

    Wellfed bench

    Isaac-Duarte/wellfed

    Open firmware that runs the PETLIBRO Granary PLAF103 pet feeder on your own Wi-Fi: no cloud, no account. Early and in testing.

    93 parts8MIT
  • 2 layers73.1 × 78 mmUltraterm, the printed circuit board in 3D

    Ultraterm

    jamdotjar/ULTRATERM

    A portable bluetooth music player based on ULTRAKILL

    22 parts8CC-BY-SA-4.0