
Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards

Hard- & software stack for authentication, authorization and accounting of your private beer tap via RFID tokens. Created by the Geraffel gang, it runs reliably on very simple and cheap hardware.
B33rn4ryCounterPCB is an open-source printed circuit board by Geraffel-Village, from the Geraffel-Village/Beernary repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 65 × 56 mm with 15 parts on 42 nets, routed with 167 tracks and 24 vias.
It is built around the BC548 and IRL2203NS-VB. Its parts include 6 connectors, 2 transistors and 1 diode. It belongs with the radio and wireless boards of this library.
Printed circuit board for the b33rn4ry counter.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | RPi_Hat:RPi_Hat_Mounting_Hole | , , , | |
| 1 | 10k | Potentiometers:Potentiometer_Bourns_3339P_Angular_ScrewUp | RV1 |
| 1 | 1N5000 | Diodes_ThroughHole:Diode_DO-41_SOD81_Horizontal_RM10 | D1 |
| 1 | BC548 | TO_SOT_Packages_THT:TO-92_Molded_Narrow_Oval | Q1 |
| 1 | Console | Pin_Headers:Pin_Header_Straight_1x03 | P3 |
| 1 | Counter | Pin_Headers:Pin_Header_Straight_1x03 | P2 |
| 1 | Display 20x4 | Pin_Headers:Pin_Header_Straight_1x16 | P1 |
| 1 | IRL2203N | TO_SOT_Packages_THT:TO-220_Neutral123_Horizontal | Q2 |
| 1 | R | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | 1k1 |
| 1 | RPi_GPIO | RPi_Hat:Pin_Header_Straight_2x20 | J1 |
| 1 | RTC | Pin_Headers:Pin_Header_Straight_1x06 | P5 |
| 1 | Switch | Pin_Headers:Pin_Header_Straight_1x02 | P4 |

ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards



DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus


clemarfolly/Microdigital-TK2000
Reprodução da PCB do TK-2000 da Microdigital, clone do Micro-Professor MPF-II

Danjovic/Soda-IDE
8 bit Compact Flash Interface for MSX computers

alvaroalea/all-spectrum-clones
Schematic of a 8bit computer, clone of Sinclair ZX Spectrum
It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the BC548 and IRL2203NS-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Geraffel-Village/Beernary repository on GitHub, at the commit this page was made from: the board is pcb-design/b33rn4ryCounterPCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).