2 layers100 × 65.5 mm
2 layers100 × 65.5 mm
SodaIDE v2 konami case
Danjovic/Soda-IDE118 bit Compact Flash Interface for MSX computers
- Size
- 100 × 65.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 123
- Pads
- 331
- Tracks, vias
- 1,035, 106
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Oct 2024
- Updated
- 8 Feb 2025
Overview
SodaIDE v2 konami case is an open-source printed circuit board by Danjovic, from the Danjovic/Soda-IDE repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 100 × 65.5 mm with 30 parts on 123 nets, routed with 1,035 tracks and 106 vias.
It is built around the 74HC245D, 74HCT138D and 74HCT32D, with the 74HCT74D and BC548 among its other parts. Its parts include 7 resistors, 6 capacitors, 5 ICs, 4 connectors and 1 diode. It belongs with the retro computing and games boards of this library.
Main components
5
74HC245D
SO-20-300mil-40℃~+125℃ 1 160uA 2V~6V 7.8mA 7.8mA 74HC 8 9ns@4.5V,50pF Bidirectional Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers
74HCT138D
SO-16-40℃~+125℃ 160uA 20ns@4.5V,50pF 3/8 4.5V~5.5V 4mA 4mA 74HCT Decoder Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches / Encoders & Decoders / Multiplexers
74HCT32D
SO-14-40℃~+125℃ 2 24ns@4.5V,50pF 2V 2uA 3.7V、4.4V 4 4.5V~5.5V 400mV 4mA 4mA 74HCT Series 800mV OR Gate SOIC-14 Logic Gates ROHSNexperiaGates74HCT74D
SOIC-14-40℃~+125℃ 1 2 3.5pF 3ns 4.5V~5.5V 40uA 44ns@4.5V,50pF 4mA 4mA 59MHz 5ns 74HCT Series Asynchronous Complementary D-Type Rising Edge Set and Reset SO-14 Flip Flops ROHSNexperia74 Series
BC548
TO-92TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)
README
README.mdSODA IDE
Compact Flash Card Interface for MSX based on SC729 RCBus Compact Flash Module originally designed by Tadeusz Pycio and Beer IDE 232 by b3rendsh
Printed circuit Boards:
For Konami Case
Version 1
Version 2
For Patola Case
Version 2
BILL OF MATERIALS
Semiconductors
| Reference | Value | Description |
|---|---|---|
| U1 | 27C512 | EEPROM 64Kb x 8 (512kbits) |
| U2 | 74HCT32 | TTL chip, can be either LS, HC or HCT |
| U3 | 74HCT74 | TTL chip, can be either LS, HC or HCT |
| U4 | 74HCT138 | TTL chip, can be either LS, HC or HCT |
| U5 | 74HC245 | TTL chip, can be either LS, HC or HCT |
| Q1 | BC548 | NPN transistor |
| LD1 | -- | Diameter 3.0mm, Red |
| D1 | 1N4148 | Fast diode, Sillicon (alternatives 1N914) |
Capacitors
| Reference | Value | Description |
|---|---|---|
| C1,C2,C3,C4,C5 | 100nF | Capacitor, Ceramic disc or Polyester |
| C6 | 100uF/16V | Electrolytic Capacitor (preferrable low profile) |
Resistors
| Reference | Value | Description |
|---|---|---|
| R1,R2,R3,R6 | 4K7 | Resistor, ¼ Watt |
| R4 | 1K | Resistor, ¼ Watt |
| R5 | 10K | Resistor, ¼ Watt |
Miscellaneous
| Reference | Value | Description |
|---|---|---|
| SW1 | -- | SPDT Switch, slide, right angle (reference OS102011MA1QN1) |
| CN1 | -- | Printed Circuit Board. Gerbers for Konami V1, V2, Patola V2 |
| JP1 | -- | Pin Header, 1x3 pin, pitch 2.54mm, straight (Vertical) |
| JP2,JP3,JP4 | -- | Pin Header, 1x2 pin, pitch 2.54mm, straight (Vertical) |
44 pin CF adapter option
| J1 | Pin Header, 2x22 pin, pitch 2.0mm, right angle (Horizontal) |
|---|
40 pin CF adapter option
| J2 | Pin Header, 2x20 pin, pitch 2.54mm, right angle (Horizontal) |
|---|
CF Socket Option
| J3 | CF Card Connector (reference 3M_N7E50-E516xx-30) |
|---|
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5 |
| 4 | 4K7 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R6 |
| 3 | Jumper_2_Small_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2, JP3, JP4 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5, R7 |
| 1 | + | LED_THT:LED_D3.0mm | LD1 |
| 1 | 100uF | msx:CP_lying | C6 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 27C512 | Package_DIP:DIP-28_W15.24mm | U1 |
| 1 | 74HC245 | Package_DIP:DIP-20_W7.62mm | U5 |
| 1 | 74HCT138 | Package_DIP:DIP-16_W7.62mm | U4 |
| 1 | 74HCT32 | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | 74HCT74 | Package_DIP:DIP-14_W7.62mm | U3 |
| 1 | BC548 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | Conn_02x22_Odd_Even | Connector_PinHeader_2.00mm:PinHeader_2x22_P2.00mm_Horizontal | J1 |
| 1 | Conn_CF_Card | Connector_Card:CF-Card_3M_N7E50-E516xx-30 | J3 |
| 1 | MSX_SLOT_CON | msx:Cart_Konami | CN1 |
| 1 | PINHD-02x20 | IDC40_EDGE:PinHeader_2x20_P2.54mm_Horizontal | J2 |
| 1 | PIN_1x3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | SW_Push_SPDT | Button_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
More from Danjovic/Soda-IDE
1Similar boards
- 2 layers
LM80C R6
leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO
153 parts123GPL-3.0 - 2 layers200 × 150 mm
- 2 layers100 × 80 mm
Mini8085Ext
skiselev/minimax8085-apu-ext
Arithmetic Processor and Extension Board for MiniMax 8085 SBC
42 parts13 - 2 layers101.6 × 50.8 mm
- 2 layers368.3 × 215.9 mm
- 2 layers150 × 90 mm
- 2 layers100 × 160 mm
- 2 layers100 × 150 mm
Music2xxx
fordp2002/music2xxx
A clone of the Hybrid Music2000 Midi interface for the Acorn BBC Microcomputer
57 parts1
Questions
How big is the SodaIDE v2 konami case PCB?
It measures 100 × 65.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SodaIDE v2 konami case use?
30 parts, built around the 74HC245D, 74HCT138D, 74HCT32D and 74HCT74D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SodaIDE v2 konami case KiCad files?
From the Danjovic/Soda-IDE repository on GitHub, at the commit this page was made from: the board is hardware/V2/SodaIDE_v2_konami_case/SodaIDE_v2_konami_case.kicad_pcb and its schematic hardware/V1/Soda_IDE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SodaIDE v2 konami case design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).