2 layers368.3 × 215.9 mm
2 layers101.6 × 50.8 mm
Rc2014 monitor
Hyiger-Designs/rc2014_monitor2Monitor Board for the RC2014
- Size
- 101.6 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 91
- Pads
- 401
- Tracks, vias
- 1,232, 7
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Apr 2019
- Updated
- 21 Apr 2020
Overview
Rc2014 monitor is an open-source printed circuit board by Hyiger-Designs, from the Hyiger-Designs/rc2014_monitor repository on GitHub, published under the OSL-3.0 licence. It is a 2-layer board of 101.6 × 50.8 mm with 62 parts on 91 nets, routed with 1,232 tracks and 7 vias.
It is built around the 74HCT541D, MAX40200AUK and 74HCT00D, with the 74HCT138D, 74HCT151D and 74HCT32D among its other parts. Its parts include 20 capacitors, 12 ICs, 9 diodes, 7 resistors and 4 connectors.
Main components
9
74HCT541D
SO-20-40℃~+125℃ 1 15ns@4.5V,50pF 160uA 4.5V~5.5V 6mA 6mA 74HCT 8 Tri-State Unidirectional SO-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers
MAX40200AUK
SOT23-5Ultra-Tiny Micropower, 1A Ideal Diode with Ultra-Low Voltage DropMaxim Integrated (Analog Devices)Uncategorised
74HCT00D
SO-14-40℃~+125℃ 100mV、400mV 12ns@4.5V,50pF 2 2V 3.7V、4.4V 4 4.5V~5.5V 40uA 4mA 4mA 74HCT Series 800mV NAND Gate Overvoltage-tolerant input TTL Compatible CMOS SO-14 Logic Gates ROHSNexperiaLogic Gates
74HCT138D
SO-16-40℃~+125℃ 160uA 20ns@4.5V,50pF 3/8 4.5V~5.5V 4mA 4mA 74HCT Decoder Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches / Encoders & Decoders / Multiplexers74HCT151D
SO-16-40℃~+125℃ 160uA 38ns@4.5V,50pF 4.5V~5.5V 4mA 4mA 74HCT 8/2 Multiplexer Single Supply SO-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches / Encoders & Decoders / Multiplexers74HCT32D
SO-14-40℃~+125℃ 2 24ns@4.5V,50pF 2V 2uA 3.7V、4.4V 4 4.5V~5.5V 400mV 4mA 4mA 74HCT Series 800mV OR Gate SOIC-14 Logic Gates ROHSNexperiaGates74HCT74D
SOIC-14-40℃~+125℃ 1 2 3.5pF 3ns 4.5V~5.5V 40uA 44ns@4.5V,50pF 4mA 4mA 59MHz 5ns 74HCT Series Asynchronous Complementary D-Type Rising Edge Set and Reset SO-14 Flip Flops ROHSNexperia74 Series
MAX6816EUS
SOT143±15kV ESD-Protected, Single CMOS Switch DebouncersMaxim Integrated (Analog Devices)Uncategorised
BAT43
DO-204AH-65℃~+125℃ 1 Independent 1V@0.2A 200mA 30V 4A 500nA@25V DO-204AH Schottky Diodes ROHSSTMicroelectronicsSchottky Diodes
README
README.mdRC2014 compatible Z80 Debug monitor. Design file are for Kicad 5.1+
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C3, C4, C5, C7, C10, C14, C15, C16, C17, C18, C19, C20 |
| 7 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7 |
| 6 | SMD Red 620nm 40mcd 2.2V; 20mA | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | LED1, LED2, LED3, LED4, LED5, LED6 |
| 6 | TIL311 | Package_DIP:DIP-14_W7.62mm_Socket | DISP1, DISP2, DISP3, DISP4, DISP5, DISP6 |
| 5 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C6, C8, C9, C11, C21 |
| 3 | 74HCT541 | Package_DIP:DIP-20_W7.62mm | U3, U4, U5 |
| 3 | BAT43 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C12, C13 |
| 2 | MAX40200AUK | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U6, U7 |
| 1 | 150R | Resistor_THT:R_Array_SIP7 | RN1 |
| 1 | 74HCT00 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | 74HCT138 | Package_DIP:DIP-16_W7.62mm | U8 |
| 1 | 74HCT151 | Package_DIP:DIP-16_W7.62mm | U12 |
| 1 | 74HCT32 | Package_DIP:DIP-14_W7.62mm | U13 |
| 1 | 74HCT74 | Package_DIP:DIP-14_W7.62mm | U10 |
| 1 | LMC555xN | Package_DIP:DIP-8_W7.62mm | U11 |
| 1 | M3 Mounting Hole | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad | J1 |
| 1 | MAX6816 | Package_TO_SOT_SMD:SOT-143 | U9 |
| 1 | Pro Bus | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | Run/Step Mode | Button_Switch_THT:SW_NKK_BB15AH | SW4 |
| 1 | SW_DIP_x03 | Button_Switch_THT:SW_DIP_SPSTx03_Piano_CTS_Series194-3MSTN_W7.62mm_P2.54mm | SW1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J4 |
| 1 | Z80 Bus | Connector_PinHeader_2.54mm:PinHeader_1x39_P2.54mm_Vertical | J2 |
Similar boards
- 4 layers280 × 140 mm
P8x control card
ksr/p8x
Generated by generators/genkicad.py from the canonical geneagle netlist (CARDS["peripheral-card"]), same standard as the memory card: 4-layer (F/B signals, In1=GND, In2=VCC planes), a bypass cap above each IC, a…
58 parts - 2 layers150 × 90 mm
- 2 layers200 × 150 mm
- 2 layers100 × 80 mm
Mini8085Ext
skiselev/minimax8085-apu-ext
Arithmetic Processor and Extension Board for MiniMax 8085 SBC
42 parts13 - 4 layers230 × 100 mm
- 2 layers214.6 × 123.2 mm
- 2 layers231.3 × 96.5 mm
Questions
How big is the Rc2014 monitor PCB?
It measures 101.6 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rc2014 monitor use?
62 parts, built around the 74HCT541D, MAX40200AUK, 74HCT00D and 74HCT138D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rc2014 monitor KiCad files?
From the Hyiger-Designs/rc2014_monitor repository on GitHub, at the commit this page was made from: the board is rc2014_monitor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rc2014 monitor design in my own project?
Its repository publishes it under the OSL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).