
Sensor epaper
Miceuz/paper-wifi
Low power E-paper display devboard with WiFi and BLE connectivity. Open source hardware.

Miceuz/paper-wifi
Low power E-paper display devboard with WiFi and BLE connectivity. Open source hardware.

open-headset-interconnect-standard/ohis
An open standard for a common interconnect between headsets and radios.




spielhuus/LoRa-Environmental-Sensors
ATtiny85 based LoRa atmospheric sensor board with BME280


dimhoff/ser4010
UART controllable SI4010 based tunable OOK/FSK RF transmitter

GamingNJncos/BLE-3D-Saturn-Public
Sega Saturn 3D Controller Bluetooth(BLE) Adapter

romix123/P1-wifi-gateway
Deze software brengt verschillende componenten bij elkaar in een handzaam pakket.

Spaceflight-Rocketry-Giessen-e-V/Telemetry
Open-Source Rocket Telemetry System Based On Radiocrafts RC232 Radio Modules


umbertoragone/usbc-rtl-sdr
A PCB adapter board to convert your RTL-SDR V3/V4 dongle from USB-A to USB-C

alexbegoon/meshimi
Meshimi unlocks powerful mesh networking for your Flipper Zero combining Meshtastic, LoRaWAN and other protocols like Matter and Thread to give you rock‑solid connectivity across miles, even off‑grid.

calvin-mcd/pandemonium
30% alpha staggered keyboard with big ISO enter and bluetooth support

EnhancedRadioDevices/915MHzEdisonExplorer
A 915MHz block for the Intel Edison.

iotmakervn/iot-wifi-uno-hw
Open hardware ESP8266 Uno board - Internet Of Things WiFi Uno

sh123/micro_loraprs
Arduino Micro LoRA/FSK USB KISS modem (for Linux AX.25, APRSDroid, Codec2Talkie) or standalone APRS AX.25 micro digirepeater

SherpaModular/RawWaves
Raw Waves is a eurorack synthesizer module that plays RAW or WAV sample files from a micro SDcard. It is a derivate work of "Radio Music" from Tom Whitwell. Raw Waves is released under a CC-by-SA 3.0 license.

ATmega8/kiterf
Release KiteRF is a SDR system with K210 & FPGA & ESP32 as its core controller, which make SDR more intelligent, portable and cheap.


joyel24/CheapMesh
PCB for Heltec HT-CT62: ESP32-C3 + SX1262 lora cheap module. Useful to run MeshTastic. Forked from : https://gitlab.com/paulhausk/CheapMesh

klein0r/pcb-ttl-ftdi-esp-adapter
PCB to connect a TTL reader either to an FTDI or ESP12-E/F (WiFi)
