yussufadel8/BLDC-Motor-Controller-STM32
Two-layer 3-phase BLDC controller in KiCad — STM32G431 FOC MCU with on-board STM32F103 SWD debugger, IR2104 half-bridges, and 3-shunt current sensing via the G431's internal op-amps.
ZeniteSolar/MCS19
Módulo de Carregamento do Sistema da embarcação solar Guarapuvu II (Zênite Solar)
ziraw/ca18det-ecu-breakout
CA18DET ECU Breakout PCB for prototyping eg. Speeduino and such.
zoemaestra/JailSnapper-usb
KiCad files for the JailSnapper USB jig, for the debugging and modification of the Snapmaker 2.0 touchscreen
0x000f1/lora-ch1
This project is based on the ESP32 microcontroller that behaves like a bridge between mobile devices and the modules.
3devo/PCB-I2C-MP-USB-Adapter
This is a small adapter board to plug on top of the I2C-MP-USB board created by Thomas Fischl. This add-on board adds a connector for the tag-connect pinout used by 3devo on some of their boards.
10robert03/stm32-nrf24-usb-node
A custom STM32C011 based wireless node with nRF24L01+ integration and USB-UART interface.
42CrMo4/P00B_UPDI_Programmer
A UPDI Programmer to use the Würth Redfit Skedd Connector and a switch for UPDI and TX of the MCU.
911RSR/RaceTemp_BLE
Like RaceTemp, but using STM32WB with integrated BLE instead of UART + an RF module.
2468shrm/Addressable-LED-Interface
A simple PCB for FRC robots using addressable RGB bling (LED strips)
2468shrm/msgeq7
A breakout board and python class for using it. Intended to add fun bling to FRC robots.
2468shrm/openmv_can_eth_shield
A PCB shield for the OpenMV camera which provides additional interfaces, including Ethernet and CAN
a6c0424fa083/LightController_PCB
This is the PCB (designed in KiCad) used in the LightController software