
Openmv can shield
2468shrm/openmv_can_i2c_shield
A PCB which is a shield for the OpenMV camera for CAN & I2C connection

A PCB shield for the OpenMV camera which provides additional interfaces, including Ethernet and CAN
Openmv can shield is an open-source printed circuit board by 2468shrm, from the 2468shrm/openmv_can_eth_shield repository on GitHub. It is a 4-layer board of 76 × 50 mm with 32 parts on 54 nets, routed with 246 tracks and 30 vias.
It is built around the SN65HVD230D, BSS138 and UPR20E3/TR7. Its parts include 8 resistors, 8 connectors, 6 capacitors, 2 ICs and 2 transistors. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10K | Resistor_SMD:R_1206_3216Metric | R1, R2, R5, R6, R7, R8 |
| 3 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4, J7, J8 |
| 2 | 0.1u | Capacitor_SMD:C_1206_3216Metric | C4, C5 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric | C2, C3 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | STEMMA_I2C_QT | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | X1, X2 |
| 1 | 0.1U | Capacitor_SMD:C_1206_3216Metric | C6 |
| 1 | 220 | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | 220u | Capacitor_SMD:CP_Elec_6.3x7.7 | C1 |
| 1 | 4K7 | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J5 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J6 |
| 1 | OPENMV_RT1602 | Appreciate:RT1062 | RT1 |
| 1 | Pulse_JXD6-0001NL | Connector_RJ:RJ45_Pulse_JXD6-0001NL_Horizontal | J2 |
| 1 | RX | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | TX | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | UPR20e3 | Appreciate:DO-216 | D1 |
| 1 | WAGO_250-204 | Appreciate:WAGO 250-204 | J1 |
| 1 | Weewooday-820 | Appreciate:Weewooday-820 | U1 |

2468shrm/openmv_can_i2c_shield
A PCB which is a shield for the OpenMV camera for CAN & I2C connection

2468shrm/Pico-Robotic-Controller
A carrier board for a Raspberry Pi Pico (W) for use in FRC robotics. Similar to the XRP board.

blinken/vandal
An ESP32-based lighting control system for campervans (or anything else)

CASE-Lab/MARV-Hardware-Electrical
Led driver with integrated eFuse and PWM dimming in a MIDI fuse format. Provides undervoltage cutoff for battery protection and a low standby current of 30 uA.

NGOQUOC98/ESP32_MODBUS_PCB_MASTER
This project was in development phase - we will remove this remark after release



menloresearch/asimov-1
v1 of Asimov, an open-source humanoid robot
It measures 76 × 50 mm and has 4 copper layers, 4.69 mm thick.
32 parts, built around the SN65HVD230D, BSS138 and UPR20E3/TR7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the 2468shrm/openmv_can_eth_shield repository on GitHub, at the commit this page was made from: the board is openmv_can_shield.kicad_pcb and its schematic openmv_can_shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask 2468shrm before reusing the design.