Skip to the content
2 layers139.9 × 85.8 mmPas hw, the printed circuit board in 3D

This project was in development phase - we will remove this remark after release

Size
139.9 × 85.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
198
Nets
153
Pads
697
Tracks, vias
1,597, 703
Pours
13
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
14 Oct 2020
Updated
9 Jan 2021

Overview

Pas hw is an open-source printed circuit board by NGOQUOC98, from the NGOQUOC98/ESP32_MODBUS_PCB_MASTER repository on GitHub. It is a 2-layer board of 139.9 × 85.8 mm with 198 parts on 153 nets, routed with 1,597 tracks and 703 vias.

It is built around the ESP32-WROVER, MAX3485ED and NRF52833-DK, with the SN65HVD230D, RS485 and LM358 among its other parts. Its parts include 64 resistors, 50 capacitors, 16 connectors, 15 ICs and 12 diodes. It belongs with the ESP32 and nRF52 and nRF5x boards of this library.

Main components

12

README

README.md

ESP32_MODBUS_PCB_MASTER

PAS sprinkler / irrigation controller

Pin Wiring

PIN NAMERS485_U2TXRS485_U2RXRS485_U2ENRS485_U1TXRS485_U1RXRS485_U1ENOPAMP_VA1OPAMP_IA0
PIN NUMGPIO22GPIO23GPIO19GPIO18GPIO10GPIO5GPIO34GPIO35

PIN NAMERELAY_OUT0RELAY_OUT1RELAY_OUT2RELAY_OUT3RELAY_OUT4RELAY_OUT5RELAY_OUT6RELAY_OUT7
PIN NUMGPIO33GPIO25GPIO32GPIO13GPIO15GPIO26GPIO4GPIO9

PIN NAMEGPIO_EX0GPIO_EX1GPIO_EX2GPIO_EX3DS1307_SCLDS1307_SDA
PIN NUMGPIO39GPIO38GPIO37GPIO36GPIO27GPIO14

Hardware

Schematics

SCHEMATIC REVIEW

PCB Layout

Top side

PCB REVIEW

Back side

PCB REVIEW

3D

Top side

3D REVIEW

Back side

3D REVIEW

Gerber

Version 3.0

Remark

This project was in development phase - we will remove this remark after release

License

Parts

198
QtyValueFootprintReferences
27100nFCapacitor_SMD:C_0603_1608MetricC10, C14, C15, C16, C19, C20, C21, C22, C25, C27, C29, C30, C31, C32, C33, C38 +11
1210KResistor_SMD:R_0603_1608MetricR6, R8, R21, R31, R59, R60, R61, R62, R65, R67, R68, R69
10BSS138Package_TO_SOT_SMD:SOT-23Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11
910Resistor_SMD:R_0603_1608MetricR45, R46, R47, R48, R53, R54, R55, R56, R64
810Afootrint_master:relay-10A-18.2x10x14K0, K1, K2, K3, K4, K5, K6, K7
81N4148Diode_SMD:D_SOD-323D12, D13, D14, D15, D16, D17, D18, D19
84K7Resistor_SMD:R_0603_1608MetricR10, R11, R24, R27, R28, R29, R30, R32
8Fuse_SmallFuse:Fuse_BelFuse_0ZRE0005FF_L8.3mm_W3.8mmF0, F1, F2, F3, F4, F5, F6, F7
62.2uFCapacitor_SMD:C_0603_1608MetricC34, C35, C36, C39, C41, C43
5470RResistor_SMD:R_0603_1608MetricR1, R25, R26, R57, R58
547uFCapacitor_SMD:C_1210_3225MetricC11, C17, C18, C26, C28
449.9R/1%Resistor_SMD:R_0603_1608MetricR15, R16, R17, R18
4C_SmallCapacitor_SMD:C_0603_1608MetricC1, C3, C5, C12
4MountingHole_PadMountingHole:MountingHole_2.5mm_PadH5, H6, H7, H8
4PTCResistor_SMD:R_0603_1608MetricR73, R74, R77, R78
4R_SmallResistor_SMD:R_0603_1608MetricR2, R7, R9, R75
310uFCapacitor_SMD:C_1210_3225MetricC13, C37, C47
31KResistor_SMD:R_0603_1608MetricR66, R70, R72
3TBDResistor_SMD:R_0603_1608MetricR12, R13, R14
20RResistor_SMD:R_0603_1608MetricR4, R63
210uF/50VCapacitor_SMD:C_1210_3225MetricC2, C4
2120RResistor_SMD:R_0603_1608MetricR71, R76
220pFCapacitor_SMD:C_0603_1608MetricC23, C24
24K7/NCResistor_SMD:R_0603_1608MetricR22, R23
2NCResistor_SMD:R_0603_1608MetricR33, R34
1100KResistor_SMD:R_0603_1608MetricR3
115uH/3AInductor_SMD:L_10.4x10.4_H4.8L1
11nFCapacitor_SMD:C_0603_1608MetricC49
125 MHzCrystal:Crystal_SMD_2520-4Pin_2.5x2.0mmY2
12N2219Package_TO_SOT_SMD:SOT-23Q1
144K2Resistor_SMD:R_0603_1608MetricR5
14K7Resistor_SMD:R_0402_1005MetricR19
1600uH/200mAInductor_SMD:L_0805_2012MetricL2
16K8/1%Resistor_SMD:R_0603_1608MetricR20
193LC46Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mmU6
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U3
1Analogfootrint_master:connect_1x4_3.81mmJ8
1AudioJackfootrint_master:jack3.5U9
1Battery_Cellfootrint_master:BAT_CR1220_HolderBT1
1BuzzerBuzzer_Beeper:Buzzer_15x7.5RM7.6BZ1
1CANfootrint_master:connect_1x4_3.81mmJ9
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ6
1Conn_02x10_Counter_Clockwisefootrint_master:connect_2x10_P1.27mm_VerticalLED_SW1
1CrystalCrystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY1
1DIODEDiode_SMD:D_0603_1608MetricD20
1DM9051Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mmU7
1DS1307Z+Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU5
1ESP32-WROVERfootrint_master:ESP32-WROOMU1
1FLASH_HEADERConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ2
1FR9888Package_SO:TI_SO-PowerPAD-8U2
1Fuse_SmallFuse:Fuse_1812_4532MetricF8
1I2Cfootrint_master:connect_1x4_3.81mmJ3
1LED_STT1LED_SMD:LED_0603_1608MetricD1
1LM358Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU4
1Logo_flametechfootrint_master:logo-flametech-v1Logo1
1MAX3485Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU12
1MCP23017_SSPackage_SO:SSOP-28_5.3x10.2mm_P0.65mmU8
1NRF52833footrint_master:Module_NRF52833_SMDU11
1NUP2105LPackage_TO_SOT_SMD:SOT-23U15
1PCM510xPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU10
1POWERfootrint_master:connect_1x4_3.81mmJ1
1RJ45_LED_ShieldedConnector_RJ:RJ45_Hanrun_HR911105AJ4
1RS485footrint_master:connect_1x4_3.81mmJ7
1Relay_0footrint_master:pin_1x1_6mmJ11
1Relay_1footrint_master:pin_1x1_6mmJ12
1Relay_2footrint_master:pin_1x1_6mmJ13
1Relay_3footrint_master:pin_1x1_6mmJ14
1Relay_4footrint_master:pin_1x1_6mmJ15
1Relay_5footrint_master:pin_1x1_6mmJ16
1Relay_6footrint_master:pin_1x1_6mmJ17
1Relay_7footrint_master:pin_1x1_6mmJ18
1SM712Package_TO_SOT_SMD:SOT-23U13
1SN65HVD230Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU14
1SS34Diode_SMD:D_SMBD3
1SW_PushButton_Switch_SMD:SW_SPST_CK_RS282G05A3SW2
1TVS 18VDiode_SMD:D_SMBD2

Similar boards

  • 4 layers114.3 × 86.4 mmLinear window controller, the printed circuit board in 3D

    Linear window controller

    eflukx/Linear-motor-window-controller

    Linear quad/octa motor slide Window controller, featuring absolute position feedback control, motor current monitoring using a ESP32-S3 hi performance controller

    201 parts
  • 4 layers120 × 120 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hardware-design-lab

    Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

    18 parts
  • 2 layers90 × 48.9 mmEsp32 octal wled, the printed circuit board in 3D

    Esp32 octal wled

    klaus-liebler/esp32_octal_wled

    79 partsMIT
  • 2 layers40.2 × 35.8 mmSensactDoorControl, the printed circuit board in 3D

    SensactDoorControl

    klaus-liebler/sensact

    Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…

    57 parts4Apache-2.0
  • 2 layers97.8 × 49.5 mmEsp03-usb jtag, the printed circuit board in 3D

    Esp03-usb jtag

    jcmvbkbc/esp03-breakout

    Programmer & JTAG debugger for ESP8266

    58 parts3
  • 6 layers40 × 16 mmE verest, the printed circuit board in 3D

    E verest

    kitspace-test-repos/kicad6-file-collection

    132 partsMIT
  • 6 layers62.8 × 57.5 mmLab4, the printed circuit board in 3D

    Lab4

    stefan-zugravel/introduzione_elettronica

    158 partsMIT

Questions

How big is the Pas hw PCB?

It measures 139.9 × 85.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pas hw use?

198 parts, built around the ESP32-WROVER, MAX3485ED, NRF52833-DK and SN65HVD230D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pas hw KiCad files?

From the NGOQUOC98/ESP32_MODBUS_PCB_MASTER repository on GitHub, at the commit this page was made from: the board is pas-hw.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pas hw design in my own project?

Its repository states no licence, so its author keeps all rights: ask NGOQUOC98 before reusing the design.