Skip to the content
12345678

93LC46/P

Microchip TechnologyExtended

-40℃~+85℃ 1,000,000 cycles 1Kbit 2.5V~5.5V 200 Years 2MHz 4ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) SPI PDIP-8 EEPROM ROHS

Part id
microchip/93LC46/P
Category
EEPROM
Package
PDIP-8
Pins
8
In stock
10 at JLCPCB (C1350388)
Used on
5 open-source boards

Overview

The 93LC46/P is an EEPROM made by Microchip Technology in a PDIP-8 package with 8 pins. -40℃~+85℃ 1,000,000 cycles 1Kbit 2.5V~5.5V 200 Years 2MHz 4ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) SPI PDIP-8 EEPROM ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:93LC56A-E_P, from EasyEDA) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 10 are in stock at JLCPCB (part C1350388). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

CS1CLK2DI3DO4VSS5ORG6NU7VCC8
EasyEDA_Cloud:93LC56A-E_PFrom EasyEDA

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the 93LC46/P
PinNameType
1CSUnspecified
2CLKUnspecified
3DIUnspecified
4DOUnspecified
5VSSUnspecified
6ORGUnspecified
7NUUnspecified
8VCCUnspecified

Open-source boards using it

5
  • 2 layers97.8 × 49.5 mmEsp03-usb jtag, the printed circuit board in 3D

    Esp03-usb jtag

    jcmvbkbc/esp03-breakout

    Programmer & JTAG debugger for ESP8266

    58 parts3
  • 2 layers139.9 × 85.8 mmPas hw, the printed circuit board in 3D

    Pas hw

    NGOQUOC98/ESP32_MODBUS_PCB_MASTER

    This project was in development phase - we will remove this remark after release

    198 parts1
  • 6 layers40 × 16 mmE verest, the printed circuit board in 3D

    E verest

    kitspace-test-repos/kicad6-file-collection

    132 partsMIT
  • 6 layers62.8 × 57.5 mmLab4, the printed circuit board in 3D

    Lab4

    stefan-zugravel/introduzione_elettronica

    158 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 93LC46/P?

Yes. The symbol is EasyEDA_Cloud:93LC56A-E_P and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 93LC46/P?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the 93LC46/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the 93LC46/P?

JLCPCB lists it as part C1350388, with 10 in stock; the sellers' links on this page open their listings.

What can replace the 93LC46/P?

Parts like it in the library: the AT93C66N by HGSEMI, the 93LC56B-I/P by Microchip Technology, the FT93C46A-UDR-B by FMD and the 25LC040/P by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 93LC46/P?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.