Skip to the content

Interfaces and adapters

7,328 boards
  • 2 layers39 × 48.5 mmJenin usb hub, the printed circuit board in 3D

    Jenin usb hub

    jeninh/jeninhub

    A USB hub with 2 USB-A and 2 USB-C slots. Plugs into your laptop's USB-C slot.

    24 parts4
  • 2 layers159.5 × 62.5 mmH Bridge KiCAD, the printed circuit board in 3D

    H Bridge KiCAD

    JoshWilbur/Electronic-Speed-Controller

    Firmware for an STM32-based H-Bridge motor controller. This project won best demonstration, UMaine ECE Class of 2025

    44 parts4
  • 2 layers25.4 × 27.9 mmEsb pluto adapter, the printed circuit board in 3D

    Esb pluto adapter

    JQIamo/Electronic_Sideband_Locking_Pluto

    Firmware to use ADALM Pluto for Electronic Sideband Locking systems

    9 parts4
  • 2 layers22.9 × 30.5 mmJtagArm20Adapter, the printed circuit board in 3D

    JtagArm20Adapter

    julianobst/arm-jtag-20-10-plus

    KiCad project for ARM Cortex-M JTAG Adapter with 20, 10 and 6 pin target header

    6 parts4CC0-1.0
  • 2 layers45 × 20 mmLICHEE JACK USB DEBUGGER, the printed circuit board in 3D

    LICHEE JACK USB DEBUGGER

    KaliAssistant/Lichee-Jack-pcb

    Open hardware extension board for Lichee-Jack with battery, Ethernet, and LED integration.

    56 parts4GPL-3.0
  • 2 layers28.2 × 17.5 mmUSBTypeC to UART, the printed circuit board in 3D

    USBTypeC to UART

    kattaliraees/USBTypeC-to-UART

    USB Type C to Serial port convertor boards for new MacBooks and other laptops

    15 parts4MIT
  • 2 layers25.5 × 25 mmHDMI to CSI, the printed circuit board in 3D

    HDMI to CSI

    keagoesdeep/microHDMItoCSI_PCB

    Connector - Micro HDMI to CSI

    5 parts4
  • 2 layers151.3 × 122.6 mmRemote v2, the printed circuit board in 3D

    Remote v2

    KIIT-Robotic-Society/Dharma_RoboFest4.0

    Dharma Bot is a quadruped robotic dog featuring 12-DOF locomotion, real-time sensing, and a modular subsystem design.

    135 parts4MIT
  • 2 layers20 × 12.5 mmAdapter, the printed circuit board in 3D

    Adapter

    kuzmapunk/RG351P-Wi-Fi-Adapter

    RG351P adapter board for Wi-Fi modules

    6 parts4GPL-3.0
  • 2 layers42.5 × 49 mmTPIC2050 breakout, the printed circuit board in 3D

    TPIC2050 breakout

    larsdehlwes/TPIC2050_breakout

    Provisory breakout board for the TPIC2050, a 3-beam laser diode driver and 9-channel motor driver, for DVD and Blu-Ray drives.

    19 parts4
  • 2 layers89 × 44 mmCDRC, the printed circuit board in 3D

    CDRC

    lilindian16/customDRC

    Development of custom Audison DRC interface

    85 parts4
  • 2 layers58.5 × 7.4 mmWii breakout, the printed circuit board in 3D

    Wii breakout

    loopj/wii-breakout

    Wii motherboard breakout board for USB, Bluetooth, GameCube controllers, A/V, and RST

    22 parts4MIT
  • 2 layers124.1 × 22.9 mmLoraWAN Stick, the printed circuit board in 3D

    LoraWAN Stick

    lostangles/LoraWAN-Stick

    Microcontroller + GPS Receiver + LoRaWAN radio

    37 parts4
  • 2 layers89.8 × 55.3 mmPican usb, the printed circuit board in 3D

    Pican usb

    marcinbor85/pican-usb

    Open-Hardware CAN-USB interface with opto-isolation

    119 parts4GPL-3.0
  • 2 layers120 × 120 mmRJ21 RJ45 PRIMARY BREAKOUT, the printed circuit board in 3D

    RJ21 RJ45 PRIMARY BREAKOUT

    marrold/RJ21_RJ45_PRIMARY_BREAKOUT

    A breakout board that converts RJ21 into 12x RJ45 connectors with 1 line each, and 3x RJ45 connectors with 4 lines each

    20 parts4
  • 4 layers35 × 42 mmADS7883-pmod, the printed circuit board in 3D

    ADS7883-pmod

    mattvenn/ADS7883-pmod

    pmod breakout for 2 x ADS7883 ADC

    31 parts4
  • 2 layers83 × 95 mmPane2, the printed circuit board in 3D

    Pane2

    meerstern/Encoder_TSSOP14

    Encoder Board For AMS AS5048A, AS5047D and others with SPI interface.

    325 parts4
  • 2 layers16.9 × 2 mmTK X90-Programming, the printed circuit board in 3D

    TK X90-Programming

    mobilinkd/KenwoodTK-x90

    Article, schematics, and models for the Kenwood TK-690, TK-790 and TK-890 radios

    9 parts4
  • 2 layers10.2 × 7.6 mmBreadled, the printed circuit board in 3D

    Breadled

    mothdotmonster/breadled

    a breadboardable WS2812 breakout board

    4 parts4CC-BY-SA-4.0
  • 2 layers23 × 23 mmMA7xx Breakout, the printed circuit board in 3D

    MA7xx Breakout

    motionlayer/MA702-Breakout-Board

    MA702 examples with PlatformIO and breakout schematics

    12 parts4MIT
  • 2 layers120.4 × 74 mmInterface, the printed circuit board in 3D

    Interface

    msxlegend/OneChipBook-internal-board-slot-2-

    build you own projet by using the slot 2 on the inside

    3 parts4