
Bbb adc
mattvenn/kicad
The documentation for this workshop mostly consists of youtube screencasts. The screencasts are deliberately fast, if you need them slower then click the video's settings button and choose a slower speed.

pmod breakout for 2 x ADS7883 ADC
ADS7883-pmod is an open-source printed circuit board by mattvenn, from the mattvenn/ADS7883-pmod repository on GitHub. It is a 4-layer board of 35 × 42 mm with 31 parts on 27 nets, routed with 121 tracks and 55 vias.
It is built around the REF5050ID. Its parts include 9 connectors, 8 capacitors, 6 resistors, 2 diodes and 2 inductors. It belongs with the interfaces and adapters boards of this library.
the ADS7883 is a 12 bit, serial ADC. It can sample up to 3MHz, and can be supplied up to 5v.
It needs 3 pins to operate: clk, select and data.
Supply can be 3.3v from the PMOD (limits maximum range of ADC to 3.3v), or 5v with a precision regulator and an external supply between 5.5v and 16v.
Use the ext/pmod jumper to select the source.
The silkscreen has an error on the 2 inputs. The 0v and ADC inputs are reversed. Attach 0v to ADC and ADC input to 0v.
Fixes the reversed input labels.
If you are using PMOD 3.3v for supply, you don't need C7, U1, C5.
LED D1 and R2 are optional for indicating PSU is good.
C1 to C4 are bypass caps and will help to improve noise performance if added.
icestick/adc.v is tested Verilog for the ADC.
A working demo for the icestick is provided in the icestick directory. This reads ADC1 and shows top 5 bits on the icestick's LEDs.
To synthesise and program an attached icestick using the Icestorm tools:
make progTo simulate using iverilog and launch gtkwave to view the waveforms:
make debug-adc| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x01 | Mounting_Holes:MountingHole_3.2mm_M3_DIN965_Pad | J2, J3, J4, J5 |
| 4 | R | Capacitors_SMD:C_0603_HandSoldering | R2, R5, R6, R7 |
| 2 | 1u | Capacitors_SMD:C_0603_HandSoldering | C2, C5 |
| 2 | CONN_01X02 | ADS7883:Pin_Header_Straight_1x02 | P2, P6 |
| 2 | L_Small | Inductors_SMD:L_0603_HandSoldering | L1, L2 |
| 2 | TEST | Connectors_TestPoints:Test_Point_Pad_1.0x1.0mm | TP3, TP4 |
| 1 | 0.1u | Capacitors_SMD:C_0603_HandSoldering | C8 |
| 1 | 0.1u, 100v | Capacitors_SMD:C_0603_HandSoldering | C9 |
| 1 | 10k | Capacitors_SMD:C_0603_HandSoldering | R11 |
| 1 | 10n | Capacitors_SMD:C_0603_HandSoldering | C4 |
| 1 | 22u, 35v | Capacitors_Tantalum_SMD:CP_Tantalum_Case-D_EIA-7343-31_Hand | C10 |
| 1 | 260mv schottky | Diodes_SMD:D_SOT-23_ANK | D2 |
| 1 | 470uF 35v | Capacitors_SMD:CP_Elec_10x10 | C1 |
| 1 | 470uF 6.3v | Capacitors_SMD:CP_Elec_6.3x7.7 | C7 |
| 1 | 50R | Resistors_SMD:R_1206_HandSoldering | R9 |
| 1 | CONN_01X02 | ADS7883:CON-SMA-EDGE | P4 |
| 1 | CONN_02X06 | ADS7883:Pin_Header_Straight_2x06 | P5 |
| 1 | LED | LEDs:LED_0603_HandSoldering | D1 |
| 1 | RF_Shield_Two_Pieces | Shielding_Cabinets:Laird_Technologies_BMI-S-102_16.50x16.50mm | J1 |
| 1 | ads7883 | ADS7883:SOT-23-6 | adc1 |
| 1 | ref5050 | ADS7883:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |

mattvenn/kicad
The documentation for this workshop mostly consists of youtube screencasts. The screencasts are deliberately fast, if you need them slower then click the video's settings button and choose a slower speed.


lnls-sirius/SPIxCONV
This project consists of an 18-bit analog input (ADC) and output (DAC) within a range of 20 V (± 10 V) and 32 digital pins that can be either as inputs or outputs.

bc-kim/PCB_KiCAD
Tips Footprint of the resisotor and capacitor should be assigned aforetime because assigning those are comfusing when lots of reisistor and capacitors are used. 3. Reference: https://wikidocs.net/103412


ojz/prompted-circuit-boards
Prompt-driven design of Eurorack modules with KiCad 10


It measures 35 × 42 mm and has 4 copper layers, 1.6 mm thick.
31 parts, built around the REF5050ID. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mattvenn/ADS7883-pmod repository on GitHub, at the commit this page was made from: the board is ADS7883-pmod.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mattvenn before reusing the design.