
Interfaces and adapters
7,328 boards- 2 layers23 × 14 mm

- 2 layers102.2 × 68.6 mm

Rpi interface
johnerlandsson/cb50_ctrl
Control system for a rebuilt Camurri CB50 brewkettle.
30 partsGPL-3.0 - 2 layers62.2 × 19 mm

2054-LPC51U68JBD48-breakout
johnwinans/2054-LPC51U68JBD48-breakout
LPC51U68JBD48 Breakout Board
24 parts - 2 layers39.4 × 38.1 mm

TC2030-to UART
JojoSc/TC2030-to-UART-Adapter
Adapter to connect the TC2030 IDC cable to a USB-to-UART Adapter. This can be used to program ESP32 boards without a big footprint on the PCB.
8 parts - 4 layers63.2 × 40.7 mm

Serial pogo
JonathanBheri/USB-to-UART-I2C-pogo-pins-
This PCB will help with production EOL testing or electrical Functional test (FCT)
17 parts - 2 layers55 × 75 mm

IMU Circuit 26-27
jonbackflip/IMU-PCB-for-UofA-BAJA-26-27
A board containing the attitude and heading sensor (IMU) for the UofA BAJA's car. CAN circuitry contained on board alongside an Arduino Nano for UART communication to the IMU.
20 parts - 2 layers45 × 45 mm

WolfDrive encoder renishaw adapter
jonblissett/renishaw-aksim-adapters
PCB and schematic designs for adapting Renishaw encoders for different signalling.
18 partsGPL-3.0 - 4 layers90 × 44.8 mm

- 2 layers97.8 × 39.4 mm

- 4 layers71.5 × 33 mm

USB to RS485-Converter Small
jonghee-son/USB-to-RS485-Converter-Small
USB to RS485 Converter made with SMD parts
20 parts - 4 layers68.6 × 27.9 mm

UART RS485 interface board
Jonny999999/powerMonitor-esp32
Firmware and hardware for measuring voltage, current, and power using PZEM-004T modules with ESP32, and publishing the data via MQTT.
18 parts - 2 layers42.1 × 16.1 mm

CANFD Breakout with JST PH3
jonnylin22/CANFD-Transceiver-MCP2562FD-Breakout-Board
CANFD Physical Layer Breakout Board
18 parts - 2 layers

- 2 layers95 × 99.5 mm

Two phase bipolar stepper motor
joshishreyas320/Two-Phase-Bipolar-Stepper-Motor-Controller-KiCad-
2-phase bipolar stepper motor driver PCB designed in KiCad. Uses L297 stepper sequencer + L298N dual H-bridge driver with 8x Schottky flyback diodes.
25 parts - 2 layers27.7 × 36.6 mm

- 2 layers18.3 × 52.1 mm

- 2 layers16 × 17.8 mm

Spectrometer Breakout Board
jshin313/RockSat-MCA-Spectrometer
This hosts the Arduino and native code for communicating with the MCA
2 parts - 2 layers18.8 × 16.3 mm

DS1881-Breakout
jspark311/DS1881-Breakout
A breakout board for the Dallas/Maxim i2c logarithmic potentiometer
8 parts - 2 layers13.7 × 16.3 mm

- 2 layers96.5 × 77.5 mm

- 2 layers77.5 × 41.5 mm

Intro to PCB
jtausif568/ATmega328P-Development-Board
An ATmega328P-based development board (Arduino-compatible) designed from scratch in KiCad
45 parts - 2 layers33 × 46.4 mm

Feather swd adapter
jtdc-ca/feather_swd_adapter
SWD Adapter with Breakout for Northern Mechatronics Feather Board (NM180310)
9 partsMIT - 2 layers65.1 × 30.1 mm

Pi gpio
jtljac/printer-pi-gpio
A quick breakout board for the Raspberry pi (in my case, the pi zero 2), for breaking out some key interfaces into convenient sockets
17 parts - 2 layers36 × 50.6 mm

PCB 2.0
JUANITO264/Proyecto_MPEI
Este repositorio contiene los diseños de PCB y los códigos fuente utilizados para el control de un brazo robótico, desarrollado como parte de la asignatura Microprocesadores e Interfaces.
33 parts