
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

Este repositorio contiene los diseños de PCB y los códigos fuente utilizados para el control de un brazo robótico, desarrollado como parte de la asignatura Microprocesadores e Interfaces.
PCB 2.0 is an open-source printed circuit board by JUANITO264, from the JUANITO264/Proyecto_MPEI repository on GitHub. It is a 2-layer board of 36 × 50.6 mm with 33 parts on 48 nets, routed with 421 tracks and 24 vias.
Its parts include 8 resistors, 6 capacitors, 5 connectors, 3 diodes and 1 IC. It belongs with the robots and motor control and interfaces and adapters boards and the PIC boards of this library.
Este repositorio contiene los diseños de PCB y los códigos fuente utilizados para el control de un brazo robótico, desarrollado como parte de la asignatura Microprocesadores e Interfaces.
El sistema consiste en un brazo robótico controlado remotamente a través de una interfaz humano-máquina (HMI) basada en botones físicos.
La comunicación entre la interfaz y el microcontrolador principal se realiza mediante el protocolo RS-232.
En este repositorio se incluyen:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric | C6, C7, C8 |
| 3 | 330 | Resistor_SMD:R_1210_3225Metric | R1, R7, R8 |
| 3 | LED | LED_SMD:LED_0805_2012Metric | D3, POW1, RST2 |
| 2 | 10K | Resistor_SMD:R_1210_3225Metric | R2, R5 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 5.1K | Resistor_SMD:R_1210_3225Metric | R3, R4 |
| 2 | Conn_01x13_Pin | Connector_PinHeader_2.54mm:PinHeader_1x13_P2.54mm_Vertical | J1, J2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | RST1, SW2 |
| 1 | 220nF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 470 | Resistor_SMD:R_1210_3225Metric | R6 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y2 |
| 1 | PIC18F4550-IPT | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J7 |
The 30 most common of 33 parts.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.

ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository

It measures 36 × 50.6 mm and has 2 copper layers, 1.6 mm thick.
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JUANITO264/Proyecto_MPEI repository on GitHub, at the commit this page was made from: the board is PCB 2.0/PCB.kicad_pcb and its schematic PCB 2.0/PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JUANITO264 before reusing the design.