Skip to the content
2 layers42.1 × 16.1 mmCANFD Breakout with JST PH3, the printed circuit board in 3D

CANFD Physical Layer Breakout Board

Size
42.1 × 16.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
13
Pads
49
Tracks, vias
53, 35
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
26 Mar 2026
Updated
28 Mar 2026

Overview

CANFD Breakout with JST PH3 is an open-source printed circuit board by jonnylin22, from the jonnylin22/CANFD-Transceiver-MCP2562FD-Breakout-Board repository on GitHub. It is a 2-layer board of 42.1 × 16.1 mm with 18 parts on 13 nets, routed with 53 tracks and 35 vias.

It is built around the CDSOT23-T24CAN. Its parts include 4 resistors, 3 capacitors, 3 diodes, 1 IC and 1 connector. It belongs with the interfaces and adapters boards of this library.

Main components

1

README

kicad/version2-with-JST-PH3/README.md

CAN-FD Transceiver Breakout Board

This is a board with the same components except that it is routed to a JST-PH3 right angle horizontal connector to allow for use of JST-PH3 cables for the CAN bus

Parts

18
QtyValueFootprintReferences
2100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C3
22k2Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3, R4
260RResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR1, R2
2HOLE_2.2mmMountingHole:MountingHole_2.2mm_M2_DIN965_Pad_TopBottomH1, H3
2LEDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD1, D2
14.7nResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderC2
1CDSOT23-T24CANCanFD-Transceiver-FP-Lib:SOT95P230X117-3ND3
1Conn_01x03_SocketConnector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_HorizontalJ1
1HEADER_MALE_6X1Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_HorizontalK1
1Jumper_2_Small_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1LOGOLOGOG***
1MCP2562FD-E_SNCanFD-Transceiver-FP-Lib:SOIC127P600X175-8NU1
1SolderJumper_3_OpenJumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabelsJP2

Similar boards

  • 4 layers115 × 85 mmCurve tracer, the printed circuit board in 3D

    Curve tracer

    lhr-solar/Power-Generation-Curve-Tracer

    The current maintainer of this project is Matthew Yu as of 05/20/2023. His email is matthewjkyu@gmail.com.

    94 parts4
  • 2 layers100 × 75 mmBPSMaster, the printed circuit board in 3D

    BPSMaster

    corbosiny/SolarCar

    All code relating to solar car like: BPS, telemetry, web dev, and more.

    180 parts3
  • 4 layers100 × 100 mmPS BPSLeader, the printed circuit board in 3D

    PS BPSLeader

    lhr-solar/PS-BPSLeader

    Reads voltage, temperature, and current of the main battery pack from the Segment Monitoring Board and HV Carrier boards to ensure the battery remains in a safe state.

    388 parts3MIT
  • 4 layers120.1 × 60 mmMppt, the printed circuit board in 3D

    Mppt

    dimembermatt/MPPT-Design

    Design and documentation of a custom MPPT for LHR Solar. Created in part with Professor Alex Hanson's ECE 394J Power Electronics Class.

    156 parts2
  • 4 layers58 × 43 mmLeaderSOM, the printed circuit board in 3D

    LeaderSOM

    lhr-solar/LeaderSOMPCB

    Leader System-On-Module (LSOM)

    144 parts2
  • 4 layers86 × 29.9 mmGeiger probe, the printed circuit board in 3D

    Geiger probe

    bartkepl/CanGeigerProbe

    Polowa sonda promieniowania jonizującego z miniaturową lampą Geigera-Müllera, komunikująca się cyfrowo przez CAN 2.0B.

    116 partsMIT
  • 4 layers76 × 29.9 mmGnss node, the printed circuit board in 3D

    Gnss node

    bartkepl/CanGnssNode

    Polowy węzeł pozycyjny z modułem GNSS Quectel L76-L (GPS/GLONASS/Galileo/QZSS) i czujnikiem orientacji (akcelerometr + magnetometr), komunikujący się cyfrowo przez CAN 2.0B.

    141 partsMIT
  • 2 layers140 × 100 mmPlts monitoring controller, the printed circuit board in 3D

    Plts monitoring controller

    desvandi/PLTSMonitoring_Firmware-Backend

    Integrated to PLTSMonitoring_PWA

    152 parts

Questions

How big is the CANFD Breakout with JST PH3 PCB?

It measures 42.1 × 16.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CANFD Breakout with JST PH3 use?

18 parts, built around the CDSOT23-T24CAN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CANFD Breakout with JST PH3 KiCad files?

From the jonnylin22/CANFD-Transceiver-MCP2562FD-Breakout-Board repository on GitHub, at the commit this page was made from: the board is kicad/version2-with-JST-PH3/CANFD-Breakout-with-JST-PH3.kicad_pcb and its schematic kicad/CANFD-Transceiver-Breakout-Board-MCP2562FD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the CANFD Breakout with JST PH3 design in my own project?

Its repository states no licence, so its author keeps all rights: ask jonnylin22 before reusing the design.