TPS2553DDBV
Texas InstrumentsExtended
-40℃~+150℃ 1 1.5A 2.7V~6.5V 85mΩ Active High High Side Switch 软启动、欠压锁定、反向电压保护、集成电荷泵、Overcurrent Protection、Over temperature protection、Short-Circuit Protection SOT-23-6 Power Distribution Switches ROHS
- Part id
- ti/TPS2553DDBV
- Category
- Power Distribution Switches
- Package
- SOT-23-6
- Pins
- 6
- In stock
- 8,721 at JLCPCB (C521201)
Overview
The TPS2553DDBV is a power Distribution Switche made by Texas Instruments in a SOT-23-6 package with 6 pins. -40℃~+150℃ 1 1.5A 2.7V~6.5V 85mΩ Active High High Side Switch 软启动、欠压锁定、反向电压保护、集成电荷泵、Overcurrent Protection、Over temperature protection、Short-Circuit Protection SOT-23-6 Power Distribution Switches ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TPS2553DDBVR, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 8,721 are in stock at JLCPCB (part C521201).
Symbol
Footprint
From the datasheet
19- Supply, least
- 2.7 V · IN, recommended operating min · p. 5
- Supply, most
- 6.5 V · IN, recommended operating max · p. 5
- Supply, absolute maximum
- 7 V · IN, absolute max · p. 5
- Junction, hottest
- 150 °C · Junction temperature, absolute max · p. 5
- Takes working
- 120 µA · IN, output enabled, VIN = 6.5 V, no load, RILIM = 20 kΩ, typical · p. 7
- Takes working
- 100 µA · IN, output enabled, VIN = 6.5 V, no load, RILIM = 210 kΩ, typical · p. 7
- Takes at most
- 150 µA · IN supply current, output enabled, VIN = 6.5 V, no load, RILIM = 20 kΩ, max · p. 7
- Takes asleep
- 100 nA · IN, output disabled, VIN = 6.5 V, VEN = 0 V, no load, typical · p. 7
- Gives
- 1.2 A · OUT, continuous, −40 °C ≤ TJ ≤ 125 °C, max · p. 5
- Gives
- 1.5 A · OUT, continuous, −40 °C ≤ TJ ≤ 105 °C, max · p. 5
- Current limit
- 1.7 A · RILIM = 15 kΩ, −40 °C ≤ TJ ≤ 105 °C, typical · p. 7
- Current limit
- 1.295 A · RILIM = 20 kΩ, −40 °C ≤ TJ ≤ 125 °C, typical · p. 7
- Current limit
- 520 mA · RILIM = 49.9 kΩ, −40 °C ≤ TJ ≤ 125 °C, typical · p. 7
- Current limit
- 130 mA · RILIM = 210 kΩ, typical · p. 7
- Current limit
- 75 mA · ILIM shorted to IN, typical · p. 7
- A pin gives at most
- 25 mA · FAULT sink current, absolute max · p. 5
- Junction to air (DBV)
- 182.6 K/W · Junction-to-ambient thermal resistance · p. 6
- Junction to board (DBV)
- 29.4 K/W · Junction-to-board thermal resistance · p. 6
- Junction to case (DBV)
- 122.2 K/W · Junction-to-case (top) thermal resistance · p. 6
What it is and has
12- Maximum load current
- 1.5 A · p. 1
- Current-limit accuracy
- ±6% at 1.7 A (Typ) · p. 1
- Adjustable current limit
- 75 mA–1700 mA (Typ) · p. 1
- Overcurrent mode
- Constant-current · p. 1
- Overcurrent response
- 2 μs (Typ) · p. 1
- Power switch
- 85-mΩ high-side MOSFET, DBV package · p. 1
- Protection
- Reverse input-output voltage protection · p. 1
- Soft-start
- Built-in · p. 1
- Enable polarity
- Active high · p. 4
- Current-limit accuracy
- ±6% at 1.7 A typical · p. 1
- Adjustable current limit
- 75 mA–1700 mA typical · p. 1
- Compatibility
- Backwards compatible with TPS2550/51 · p. 1
Around it
3- cap 0.1 μF or greater
- between IN and GND; Ceramic; place as close to the IC as possible. · p. 4
- res 15 kΩ ≤ RILIM ≤ 232 kΩ
- between ILIM and GND; 1% resistor programs the current-limit threshold; keep routing short. · p. 15
- cap 0.1μF or greater
- between IN and GND; Ceramic bypass capacitor, as close to the device as possible for local noise decoupling. · p. 20
Specifications
60| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Voltage range on IN, OUT, EN , ILIM, FAULT | Over operating free-air temperature range; referenced to GND | min -0.3 · max 7 V | 5 |
| Voltage range from IN to OUT | Over operating free-air temperature range | min -7 · max 7 V | 5 |
| Continuous FAULT sink current | Over operating free-air temperature range | min 0 · max 25 mA | 5 |
| ILIM source current | Over operating free-air temperature range | min 0 · max 1 mA | 5 |
| Maximum junction temperature TJ | min -40 · max 150 °C | 5 | |
| Storage temperature Tstg | min -65 · max 150 °C | 5 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; ±2000 V | max 2000 V | 5 |
| Electrostatic discharge V(ESD) | Charged device model (CDM), per JEDEC specification JESD22-C101, all pins; ±500 V | max 500 V | 5 |
| Electrostatic discharge V(ESD) | IEC 61000-4-2 contact discharge; output terminals of EVM; ±8000 V | max 8000 V | 5 |
| Electrostatic discharge V(ESD) | IEC 61000-4-2 air-gap discharge; output terminals of EVM; ±15000 V | max 15000 V | 5 |
| Input voltage, IN VIN | Over operating free-air temperature range | min 2.7 · max 6.5 V | 5 |
| Enable voltage VEN | TPS2553D | min 0 · max 6.5 V | 5 |
| Enable voltage VEN | min 0 · max 6.5 V | 5 | |
| High-level input voltage on EN VIH | min 1.1 V | 5 | |
| Low-level input voltage on EN VIL | max 0.66 V | 5 | |
| Continuous output current, OUT IOUT | –40 °C ≤ TJ ≤ 125 °C | min 0 · max 1.2 A | 5 |
| Continuous output current, OUT IOUT | –40 °C ≤ TJ ≤ 105 °C | min 0 · max 1.5 A | 5 |
| Current-limit threshold resistor range (nominal 1%) from ILIM to GND RILIM | min 15 · max 232 KΩ | 5 | |
| Continuous FAULT sink current IO | min 0 · max 10 mA | 5 | |
| Input de-coupling capacitance, IN to GND | min 0.1 uF | 5 | |
| Operating virtual junction temperature TJ | IOUT ≤ 1.2 A | min -40 · max 125 °C | 5 |
| Operating virtual junction temperature TJ | IOUT ≤ 1.5 A | min -40 · max 105 °C | 5 |
| Junction-to-ambient thermal resistance RθJA | TPS2553D, DBV, 6 PINS | typ 182.6 °C/W | 6 |
| Junction-to-case (top) thermal resistance RθJC(top) | TPS2553D, DBV, 6 PINS | typ 122.2 °C/W | 6 |
| Junction-to-board thermal resistance RθJB | TPS2553D, DBV, 6 PINS | typ 29.4 °C/W | 6 |
| Junction-to-top characterization parameter ψJT | TPS2553D, DBV, 6 PINS | typ 20.8 °C/W | 6 |
| Junction-to-board characterization parameter ψJB | TPS2553D, DBV, 6 PINS | typ 28.9 °C/W | 6 |
| Static drain-source on-state resistance rDS(on) | DBV package, TJ = 25°C; VEN = VIN, RFAULT = 10 kΩ | typ 85 · max 95 mΩ | 7 |
| Static drain-source on-state resistance rDS(on) | DBV package, –40°C ≤TJ ≤125°C; VEN = VIN, RFAULT = 10 kΩ | max 135 mΩ | 7 |
| Rise time, output tr | VIN = 6.5 V; CL = 1 uF, RL = 100 Ω; VEN = VIN, RFAULT = 10 kΩ | typ 1.1 · max 1.5 ms | 7 |
| Rise time, output tr | VIN = 2.5 V; CL = 1 uF, RL = 100 Ω; VEN = VIN, RFAULT = 10 kΩ | typ 0.7 · max 1 ms | 7 |
| Fall time, output tf | VIN = 6.5 V; CL = 1 uF, RL = 100 Ω; VEN = VIN, RFAULT = 10 kΩ | min 0.2 · max 0.5 ms | 7 |
| Fall time, output tf | VIN = 2.5 V; CL = 1 uF, RL = 100 Ω; VEN = VIN, RFAULT = 10 kΩ | min 0.2 · max 0.5 ms | 7 |
| Enable pin turn on/off threshold | Over recommended operating conditions | min 0.66 · max 1.1 V | 7 |
| Input current IEN | VEN = 0 V or 6.5 V, VEN = 0 V or 6.5 V | min -0.5 · max 0.5 uA | 7 |
| Turnon time ton | CL = 1 uF, RL = 100 Ω, see Figure 20 | max 3 ms | 7 |
| Turnoff time toff | CL = 1 uF, RL = 100 Ω, see Figure 20 | max 3 ms | 7 |
| Current-limit threshold (Maximum DC output current IOUT delivered to load) and Short-circuit current, OUT connected to GND IOS | RILIM = 15 kΩ; –40°C ≤TJ ≤105°C | min 1610 · typ 1700 · max 1800 mA | 7 |
| Current-limit threshold (Maximum DC output current IOUT delivered to load) and Short-circuit current, OUT connected to GND IOS | RILIM = 20 kΩ; TJ = 25°C | min 1215 · typ 1295 · max 1375 mA | 7 |
| Current-limit threshold (Maximum DC output current IOUT delivered to load) and Short-circuit current, OUT connected to GND IOS | RILIM = 20 kΩ; –40°C ≤TJ ≤125°C | min 1200 · typ 1295 · max 1375 mA | 7 |
| Current-limit threshold (Maximum DC output current IOUT delivered to load) and Short-circuit current, OUT connected to GND IOS | RILIM = 49.9 kΩ; TJ = 25°C | min 490 · typ 520 · max 550 mA | 7 |
| Current-limit threshold (Maximum DC output current IOUT delivered to load) and Short-circuit current, OUT connected to GND IOS | RILIM = 49.9 kΩ; –40°C ≤TJ ≤125°C | min 475 · typ 520 · max 565 mA | 7 |
| Current-limit threshold (Maximum DC output current IOUT delivered to load) and Short-circuit current, OUT connected to GND IOS | RILIM = 210 kΩ | min 110 · typ 130 · max 150 mA | 7 |
| Current-limit threshold (Maximum DC output current IOUT delivered to load) and Short-circuit current, OUT connected to GND IOS | ILIM shorted to IN | min 50 · typ 75 · max 100 mA | 7 |
| Response time to short circuit tIOS | VIN = 5 V (see Figure 21) | typ 2 us | 7 |
| Reverse-voltage comparator trip point (VOUT – VIN) | Over recommended operating conditions; VEN = VIN, RFAULT = 10 kΩ | min 95 · typ 135 · max 190 mV | 7 |
| Time from reverse-voltage condition to MOSFET turn off | VIN = 5 V | min 3 · typ 5 · max 7 ms | 7 |
| Supply current, low-level output IIN_off | VIN = 6.5 V, No load on OUT, VEN = 0 V | typ 0.1 · max 1 uA | 7 |
| Supply current, high-level output IIN_on | VIN = 6.5 V, No load on OUT; RILIM = 20 kΩ; VEN = VIN | typ 120 · max 150 uA | 7 |
| Supply current, high-level output IIN_on | VIN = 6.5 V, No load on OUT; RILIM = 210 kΩ; VEN = VIN | typ 100 · max 130 uA | 7 |
| Reverse leakage current IREV | VOUT = 6.5 V, VIN = 0 V; TJ = 25 °C | typ 0.01 · max 1 uA | 7 |
| Low-level input voltage, IN UVLO | VIN rising | typ 2.35 · max 2.45 V | 7 |
| Hysteresis, IN | TJ = 25 °C | typ 25 mV | 7 |
| Output low voltage, FAULT VOL | I/FAULT = 1 mA | max 180 mV | 7 |
| Off-state leakage | V/FAULT = 6.5 V | max 1 uA | 7 |
| FAULT deglitch | FAULT assertion or de-assertion due to overcurrent condition | min 5 · typ 7.5 · max 10 ms | 7 |
| FAULT deglitch | FAULT assertion or de-assertion due to reverse-voltage condition | min 2 · typ 4 · max 6 ms | 7 |
| Thermal shutdown threshold | min 155 °C | 7 | |
| Thermal shutdown threshold in current-limit | In current-limit | min 135 °C | 7 |
| Hysteresis | Thermal shutdown | typ 10 °C | 7 |
Pins, by the datasheet
6- 1 IN
- Input voltage; connect a 0.1 uF or greater ceramic capacitor from IN to GND as close to the IC as possible. · p. 4
- 2 GND
- Ground connection; connect externally to PowerPAD. · p. 4
- 3 EN
- Enable input; logic high turns on power switch. · p. 4
- 4 FAULT
- Active-low open-drain output asserted during overcurrent, overtemperature, or reverse-voltage conditions. · p. 4
- 5 ILIM
- External resistor sets current-limit threshold; recommended 15 kΩ ≤ RILIM ≤ 232 kΩ. · p. 4
- 6 OUT
- Power-switch output. · p. 4
Ordering codes, by the datasheet
9- TPS2553DDBVR
- SOT-23 (DBV) · 6 pins; 3000 | LARGE T&R; operating temperature -40 to 125 °C · p. 28
- TPS2553DDBVR.A
- SOT-23 (DBV) · 6 pins; 3000 | LARGE T&R; operating temperature -40 to 125 °C · p. 28
- TPS2553DDBVR.B
- SOT-23 (DBV) · 6 pins; 3000 | LARGE T&R; operating temperature -40 to 125 °C · p. 28
- TPS2553DDBVRG4
- SOT-23 (DBV) · 6 pins; 3000 | LARGE T&R; operating temperature -40 to 125 °C · p. 28
- TPS2553DDBVRG4.A
- SOT-23 (DBV) · 6 pins; 3000 | LARGE T&R; operating temperature -40 to 125 °C · p. 28
- TPS2553DDBVRG4.B
- SOT-23 (DBV) · 6 pins; 3000 | LARGE T&R; operating temperature -40 to 125 °C · p. 28
- TPS2553DDBVT
- SOT-23 (DBV) · 6 pins; 250 | SMALL T&R; operating temperature -40 to 125 °C · p. 28
- TPS2553DDBVT.A
- SOT-23 (DBV) · 6 pins; 250 | SMALL T&R; operating temperature -40 to 125 °C · p. 28
- TPS2553DDBVT.B
- SOT-23 (DBV) · 6 pins; 250 | SMALL T&R; operating temperature -40 to 125 °C · p. 28
Parts like it
8TPS22918DBV
SOT-23-6-40℃~+105℃ 1 1V~5.5V 2A 53mΩ Active High Load Switch Output discharge function、Soft-start、Integrated charge pump SOT-23-6 Power Distribution Switches ROHSTexas InstrumentsPower Distribution SwitchesTPS2553DBV
SOT-23-6-40℃~+150℃ 1 1.5A 2.5V~6.5V 85mΩ Active High High Side Switch 过压保护、软启动、欠压锁定、反向电压保护、集成电荷泵、Overcurrent Protection、Over temperature protection、锁存保护、Short-Circuit Protection SOT-23-6 Power Distribution Switches ROHSTexas InstrumentsPower Distribution SwitchesAP2553W6
SOT-26-40℃~+125℃ 1 2.1A 2.7V~5.5V 70mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Over Voltage Protection、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Overtemperature protection (OTP) SOT-26 Power Distribution Switches ROHSDiodes IncorporatedPower Distribution SwitchesTPS27081ADDC
SOT-23-6-40℃~+85℃ 1 1.2V~8V 32mΩ 3A Active Low High Side Switch Soft-start SOT-23-6 Power Distribution Switches ROHSTexas InstrumentsPower Distribution SwitchesAP22653W6
SOT-26-40℃~+85℃ 1 2.1A 3V~5.5V 65mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Over Voltage Protection、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Overtemperature protection (OTP) SOT-26 Power Distribution Switches ROHSDiodes IncorporatedPower Distribution SwitchesTPD3S014DBV
SOT-23-6-40℃~+125℃ 20nA 4.5V~5.5V 500mA Not supported Not supported Soft-start、Under-voltage lockout、Overcurrent Protection、Short-Circuit Protection、Reverse current blocking、Output discharge function SOT-23-6 Power Distribution Switches ROHSTexas InstrumentsPower Distribution SwitchesTPS2552DBV
SOT-23-6-40℃~+150℃ 1 1.5A 2.5V~6.5V 85mΩ Active Low High Side Switch Overcurrent Protection(OCP)、Overtemperature protection (OTP) SOT-23-6 Power Distribution Switches ROHSTexas InstrumentsPower Distribution SwitchesSIP32510DT
TSOT-23-6-40℃~+125℃ 1 1.2V~5.5V 3A 46mΩ High Side Switch TSOT-23-6 Power Distribution Switches ROHSVishay IntertechnologyPower Distribution Switches
Questions
Is there a KiCad symbol and footprint for the TPS2553DDBV?
Yes. The symbol is EasyEDA_Cloud:TPS2553DDBVR and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TPS2553DDBV?
SOT-23-6, with 6 pins. Its footprint is drawn on this page.
Where is the TPS2553DDBV datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TPS2553DDBV?
JLCPCB lists it as part C521201, with 8,721 in stock; the sellers' links on this page open their listings.
What can replace the TPS2553DDBV?
Parts like it in the library: the TPS22918DBV by Texas Instruments, the TPS2553DBV by Texas Instruments, the AP2553W6 by Diodes Incorporated and the TPS27081ADDC by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.