
OneInchEye
will127534/OneInchEye
A One Inch CMOS sensor (IMX283) camera board designed for Raspberry Pi
Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

will127534/OneInchEye
A One Inch CMOS sensor (IMX283) camera board designed for Raspberry Pi

will127534/Miniature-CM4-Cluster
A dense cluster for four Raspberry Pi Compute Module 4

will127534/MK4001MTD-USB-Bridge
The MK4001MTD is a 4 GB Microdrive originally used in the Nokia N91 music phone and some other devices, like MP3 players or USB drives, back when flash storage was still quite expensive.

will127534/RPI5-SDexpress-Hat
ctrl-c "RPI5-CFE-Hat" ctrl-v "RPI5-SDexpress-Hat"

will127534/GlobalEye
A simple camera board using GMAX3412 1" 4K@30fps global shutter sensor

will127534/ShutterEye
A simple camera board using SC910GS 1" 4K@30fps global shutter sensor

will127534/microSD-Switcher-Reader
A simple USB3.0 uSD card reader with a SD card switch for SBCs


will127534/BL-5C-Battery-Breakout-Board
A simple breakout board for BL-5C + 3D Printed holder


will127534/CSI-2-FourLane-HDMI-Extender
A simple MIPI CSI-2 extender with 4-lane support through HDMI cable

will127534/gmax4002-breakout
A basic minimum GMAX4002 breakout board for Raspberry Pi

will127534/Microdrive-CF-Card-Reader
Simple CF card reader designed for microdrives based on either GL834 or JM20337

will127534/Miniature-CM4-Cluster
A dense cluster for four Raspberry Pi Compute Module 4

will127534/CSI-2-FourLane-HDMI-Extender
A simple MIPI CSI-2 extender with 4-lane support through HDMI cable

will127534/Microdrive-CF-Card-Reader
Simple CF card reader designed for microdrives based on either GL834 or JM20337