
GlobalEye
will127534/GlobalEye
A simple camera board using GMAX3412 1" 4K@30fps global shutter sensor

A basic minimum GMAX4002 breakout board for Raspberry Pi
Gmax4002-breakout is an open-source printed circuit board by will127534, from the will127534/gmax4002-breakout repository on GitHub, published under the MIT licence. It is a 4-layer board of 44.3 × 39 mm with 142 parts on 71 nets, routed with 416 tracks and 354 vias.
It is built around the AP3418KTR-G1, LP5907MFX-1.8 and TCA9406DCT, with the TVS0500DRV, DLP11SN900HL2L and DFE201210U-2R2M=P2 among its other parts. Its parts include 102 capacitors, 8 resistors, 7 ICs, 3 connectors and 1 diode. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
A basic minimum GMAX4002 (1/1.7" 2048x1200 Global shutter) breakout board for Raspberry Pi
In general this is a simple breakout board for GMAX4002 sensor, see here on the driver side of things. The caveat is that you will need to supply trigger pulses to the TEXP test point in order to trigger a new frame from the sensor and the board will not generate that signal for you, as such this is not really a complete board in my opinion but it might be easier for those who are taking this to integrate in their project.
See the action in video here: Youtube.
Note that the decoupling capacitor requirements from the leaked pre-released datasheet is a bit... over spec in my opinion(There is no F-way you need 2 x 22uF, 10uF and 100nF for each pixel voltage regulator), the board is deisgned following the datasheet but you can see in the board photos I've omitted some of the capacitors when soldering and it work just fine (I guess).
At the very least this board has been tested on RPI5 with analog discovery 2 as pulse generating source. Currently I have no plan to continuing develop this board as a raspberry pi camera module but it might be useful for someone looking at this sensor also. Lastly, this project is released as MIT license, do what ever you want with that.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C4, C10, C12, C14, C16, C18, C24, C28, C33, C39, C40, C47, C48, C59, C100 +17 |
| 27 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C1, C3, C5, C11, C13, C15, C17, C23, C27, C31, C35, C36, C43, C44, C51, C52 +11 |
| 20 | 22uF | Capacitor_SMD:C_0402_1005Metric | C29, C30, C32, C34, C37, C38, C41, C42, C45, C46, C49, C50, C55, C56, C57, C58 +4 |
| 10 | 22uF | Capacitor_SMD:C_0805_2012Metric | C19, C20, C21, C22, C25, C26, C101, C102, C103, C104 |
| 8 | TEXP | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9 |
| 5 | DLP11SN900HL2L | footprints:DLP11SA350HL2B | FL1, FL2, FL3, FL4, FL5 |
| 4 | 10K | Resistor_SMD:R_0402_1005Metric | R4, R5, R8, R10 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C75, C78, C79 |
| 2 | 10nF | Capacitor_SMD:C_0402_1005Metric | C76, C81 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C74, C82 |
| 2 | BLM18KG102SN1D | Inductor_SMD:L_0603_1608Metric | FB1, FB2 |
| 2 | C_Feedthrough | footprints:NFM18CC101R1C3D | C70, C73 |
| 1 | 1.15K | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 100pF | Capacitor_SMD:C_0402_1005Metric | C77 |
| 1 | 12.4K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 220nF | Capacitor_SMD:C_0402_1005Metric | C68 |
| 1 | 22R | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C80 |
| 1 | 3.57K | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | AP3418KTR-G1 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | Conn_01x02_Shielded | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J1 |
| 1 | Conn_01x04_Shielded | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J3 |
| 1 | DFE201210U-2R2M=P2 | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | ECS-2520MV-400-DN-TR | Oscillator:Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mm | U8 |
| 1 | FH12A-22S-0.5SH(55) | Connector_FFC-FPC:Hirose_FH12-22S-0.5SH_1x22-1MP_P0.50mm_Horizontal | J4 |
| 1 | LP5907MFX-1.8 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | MBR0540 | Diode_SMD:D_SOD-123 | D1 |
| 1 | TCA9406DC | footprints:TCA9406DCUR | U7 |
| 1 | TDIG | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | TPS7A90 | Package_DFN_QFN:Texas_S-PDSO-N10_EP1.2x2mm | U5 |
| 1 | TVS0500DRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U3 |
| 1 | ~ | GMAX4002:QFN-74_16.6x12.9_Pitch0.7mm | U1 |

will127534/GlobalEye
A simple camera board using GMAX3412 1" 4K@30fps global shutter sensor

will127534/OneInchEye
A One Inch CMOS sensor (IMX283) camera board designed for Raspberry Pi

will127534/ShutterEye
A simple camera board using SC910GS 1" 4K@30fps global shutter sensor





alxgmpr/moisture-sensor
Indoor capacitive soil moisture sensor - nRF54L15 + nPM1300 + FDC1004, BTHome v2 over BLE
It measures 44.3 × 39 mm and has 4 copper layers, 1.6 mm thick.
142 parts, built around the AP3418KTR-G1, LP5907MFX-1.8, TCA9406DCT and TVS0500DRV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the will127534/gmax4002-breakout repository on GitHub, at the commit this page was made from: the board is gmax4002-breakout.kicad_pcb and its schematic gmax4002-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).