Skip to the content

TCA9406DCT

Texas Instruments

2-Bit Bidirectional 1-MHz, I2C Bus and SMBus Voltage-Level Translator with 8-kV HBM ESD

Part id
ti/TCA9406DCT
Category
Uncategorised
Package
SSOP8
Pins
8
Used on
21 open-source boards

Overview

The TCA9406DCT is an uncategorised made by Texas Instruments in a SSOP8 package with 8 pins. 2-Bit Bidirectional 1-MHz, I2C Bus and SMBus Voltage-Level Translator with 8-kV HBM ESD.

PCBKit's library has its KiCad symbol (Interface:TCA9406DC, from KiCad's library) and its footprint (Package_SO:SSOP-8_2.95x2.8mm_P0.65mm, from KiCad's library), ready for a KiCad board. 21 open-source boards in 18 repositories on GitHub use it.

Symbol

1SDA_B2GND3VCCA4SDA_A5SCL_A6OE7VCCB8SCL_B
Interface:TCA9406DCFrom KiCad's library

Footprint

Package_SO:SSOP-8_2.95x2.8mm_P0.65mmFrom KiCad's library

Pinout

8
The pins of the TCA9406DCT
PinNameType
1SDA_BInput/output
2GNDPower in
3VCCAPower in
4SDA_AInput/output
5SCL_AInput/output
6OEInput
7VCCBPower in
8SCL_BInput/output

Open-source boards using it

21See all 21
  • 4 layers39 × 39 mmOneInchEye, the printed circuit board in 3D

    OneInchEye

    will127534/OneInchEye

    A One Inch CMOS sensor (IMX283) camera board designed for Raspberry Pi

    94 parts355MIT
  • 4 layers26.4 × 56 mmRPI5-SDexpress Hat, the printed circuit board in 3D

    RPI5-SDexpress Hat

    will127534/RPI5-SDexpress-Hat

    ctrl-c "RPI5-CFE-Hat" ctrl-v "RPI5-SDexpress-Hat"

    51 parts37MIT
  • 4 layers39 × 39 mmGlobalEye, the printed circuit board in 3D

    GlobalEye

    will127534/GlobalEye

    A simple camera board using GMAX3412 1" 4K@30fps global shutter sensor

    148 parts31MIT
  • 4 layers39 × 39 mmShutterEye, the printed circuit board in 3D

    ShutterEye

    will127534/ShutterEye

    A simple camera board using SC910GS 1" 4K@30fps global shutter sensor

    157 parts26MIT
  • 4 layers65 × 56 mmRPI5-CFE Hat, the printed circuit board in 3D

    RPI5-CFE Hat

    will127534/RPI5-CFE-Hat

    CFexpress Card hat for Raspberry Pi 5

    59 parts25MIT
  • 4 layers44.3 × 39 mmGmax4002-breakout, the printed circuit board in 3D

    Gmax4002-breakout

    will127534/gmax4002-breakout

    A basic minimum GMAX4002 breakout board for Raspberry Pi

    142 parts12MIT
  • 4 layers95.9 × 90.2 mmBaikal be t100, the printed circuit board in 3D

    Baikal be t100

    chipiki/baikal_be-t1000

    OpenHardware development board for Russian Baikal BE-T1000 MIPS Warrior P-class P5600 processor

    381 parts6BSD-3-Clause
  • 4 layers134 × 33 mmNixie clock, the printed circuit board in 3D

    Nixie clock

    anders-bzn/nixie-clock

    Rasberry Pi nixie clock with six digits and NTP sync

    41 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TCA9406DCT?

Yes. The symbol is Interface:TCA9406DC and the footprint Package_SO:SSOP-8_2.95x2.8mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TCA9406DCT?

SSOP8, with 8 pins. Its footprint is drawn on this page.

What can replace the TCA9406DCT?

Parts like it in the library: the PCA9306DCT by Texas Instruments, the SN74AVC2T45DCT by Texas Instruments, the SN74LVC1G123DCT by Texas Instruments and the SN74LVC1G139DCT by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TCA9406DCT?

21 boards in 18 repositories on GitHub; the most starred are listed on this page, with their KiCad files.