
H730duino
martinribelotta/h730duino
STM32H7 Arduino form factor and software compatible board

Presence Sensor is an open-source printed circuit board by Sanderhuisman, from the Sanderhuisman/Presence-Sensor repository on GitHub, published under the MIT licence. It is a 2-layer board of 28 × 65 mm with 77 parts on 92 nets, routed with 107 tracks and 34 vias.
It is built around the ESP32-S2-MINI-1-N4, BMP280 and AMS1117-3.3, with the AP2161WG, FSUSB42UMX and USBLC6-2P6 among its other parts. Its parts include 24 capacitors, 22 resistors, 7 ICs, 4 diodes and 4 connectors. It belongs with the sensors and measurement boards and the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C5, C6, C11, C12, C13, C14, C15, C16, C19, C21, C24 |
| 9 | 10K | Resistor_SMD:R_0603_1608Metric | R3, R8, R9, R10, R11, R12, R14, R19, R20 |
| 6 | 0R | Resistor_SMD:R_0603_1608Metric | R1, R2, R16, R17, R21, R22 |
| 6 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID1, FID2, FID3, FID4, FID5, FID6 |
| 4 | 22u | Capacitor_SMD:C_0805_2012Metric | C4, C7, C9, C10 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C17, C18 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C8, C23 |
| 2 | 4.7K | Resistor_SMD:R_0603_1608Metric | R4, R7 |
| 2 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C3, C20 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H3, H4 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C22 |
| 1 | 22.1K | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 32.768MHz | Presence Sensor:NX3215SA | Y1 |
| 1 | 47.5K | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | AP2161W | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | BMP280 | Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U5 |
| 1 | CP2102N-Axx-xQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U7 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | DLP11SN900HL2L | Presence Sensor:FIL_DLP11SN900HL2L | FL1 |
| 1 | DNP | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | ESDA25P35 | Presence Sensor:TVS_ESDA25P35-1U1M | D1 |
| 1 | ESDA6V1-5SC6 | Package_TO_SOT_SMD:SOT-23-6 | D5 |
| 1 | ESP32-S2-MINI-1 | Presence Sensor:XCVR_ESP32-S2-MINI-1 | U1 |
| 1 | FSUSB42UMX | Presence Sensor:IC_FSUSB42UMX | U6 |
| 1 | MBT3904DW1 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | SEN0395 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | SM04B-SRSS-TB(LF)(SN) | Presence Sensor:JST_SM04B-SRSS-TB(LF)(SN) | J3 |
| 1 | SP0502BAHT | Package_TO_SOT_SMD:SOT-23 | D3 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_Push_1P1T-SH_NO_CK_KMR2xxG | SW3 |
| 1 | USB4105 | Presence Sensor:GCT_USB4105_REVA | J2 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U2 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2 |

martinribelotta/h730duino
STM32H7 Arduino form factor and software compatible board



will127534/GlobalEye
A simple camera board using GMAX3412 1" 4K@30fps global shutter sensor

will127534/gmax4002-breakout
A basic minimum GMAX4002 breakout board for Raspberry Pi


martinroger/ipodesp32
An iPod emulator for 2006-2013 BMW Mini Coopers that need Bluetooth

It measures 28 × 65 mm and has 2 copper layers, 1.6 mm thick.
77 parts, built around the ESP32-S2-MINI-1-N4, BMP280, AMS1117-3.3 and AP2161WG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Sanderhuisman/Presence-Sensor repository on GitHub, at the commit this page was made from: the board is pcb/presence_sensor.kicad_pcb and its schematic pcb/presence_sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).