Skip to the content
12345

AP2161WG

Diodes IncorporatedExtended

-40℃~+85℃ 1 1A 2.7V~5.5V 95mΩ Active Low Load Switch Short-Circuit Protection(SCP)、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Overtemperature protection (OTP) SOT-23-5 Power Distribution Switches ROHS

Part id
diodes/AP2161WG
Category
Power Distribution Switches
Package
SOT-23-5
Pins
5
In stock
9,082 at JLCPCB (C176957)
Used on
10 open-source boards

Overview

The AP2161WG is a power Distribution Switche made by Diodes Incorporated in a SOT-23-5 package with 5 pins. -40℃~+85℃ 1 1A 2.7V~5.5V 95mΩ Active Low Load Switch Short-Circuit Protection(SCP)、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Overtemperature protection (OTP) SOT-23-5 Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (Power_Management:AP2161W, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 9,082 are in stock at JLCPCB (part C176957). 10 open-source boards in 9 repositories on GitHub use it.

Symbol

1OUT2GND3FLG4EN5IN
Power_Management:AP2161WFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the AP2161WG
PinNameType
1OUTPower out
2GNDPower in
3FLGOpen collector
4ENInput
5INPower in

Open-source boards using it

10See all 10
  • 4 layers101.6 × 53.3 mmH730duino, the printed circuit board in 3D

    H730duino

    martinribelotta/h730duino

    STM32H7 Arduino form factor and software compatible board

    111 parts47MIT
  • 6 layers50 × 75 mmSandflat, the printed circuit board in 3D

    Sandflat

    apfaudio/sandflat

    Lower-cost DSP experimentation host for the SoldierCrab ECP5 SoM

    113 parts4CERN-OHL-S-2.0
  • 4 layers26 × 30 mm2usbc, the printed circuit board in 3D

    2usbc

    jack-greenberg/2sb

    Framework double USB-C expansion card

    71 parts1
  • 4 layers101.6 × 53.3 mmH730duino, the printed circuit board in 3D

    H730duino

    SoCXin/STM32H730

    L6 R5:ST Cortex-M7 550MHz MCU (STM32H730)

    124 parts1
  • 4 layers31.7 × 110 mmTiliqua motherboard, the printed circuit board in 3D

    Tiliqua motherboard

    antoinevg/tiliqua

    A powerful, hackable FPGA-based audio multitool for Eurorack.

    134 partsCERN-OHL-S-2.0
  • 2 layers28 × 65 mmPresence Sensor, the printed circuit board in 3D

    Presence Sensor

    Sanderhuisman/Presence-Sensor

    77 partsMIT
  • 2 layers120 × 92 mmRotatorController, the printed circuit board in 3D

    RotatorController

    wa1hco/Rotator-Controller-V2

    Designed to remotely control CDE rotors. Updated design with new enclosure and optional user interface

    60 partsCC0-1.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the AP2161WG?

Yes. The symbol is Power_Management:AP2161W and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AP2161WG?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the AP2161WG datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the AP2161WG?

JLCPCB lists it as part C176957, with 9,082 in stock; the sellers' links on this page open their listings.

What can replace the AP2161WG?

Parts like it in the library: the SY6280AAC by 矽力杰silergy, the AP2171WG by Diodes Incorporated, the TPS2051BDBV by Texas Instruments and the RT9742CGJ5 by RICHTEK. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AP2161WG?

10 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.