
MBT3904DW1
onsemiExtended
-55℃~+150℃ 100 150mW 2 NPN 200mA 300MHz 300mV 40V 50nA 6V NPN SOT-363 Bipolar (BJT) ROHS
- Part id
- onsemi/MBT3904DW1
- Category
- Bipolar (BJT)
- Package
- SOT-363
- Pins
- 6
- In stock
- 42,479 at JLCPCB (C110150)
- Used on
- 39 open-source boards
Overview
The MBT3904DW1 is a bipolar made by onsemi in a SOT-363 package with 6 pins. -55℃~+150℃ 100 150mW 2 NPN 200mA 300MHz 300mV 40V 50nA 6V NPN SOT-363 Bipolar (BJT) ROHS.
PCBKit's library has its KiCad symbol (Transistor_BJT:MBT3904DW1, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-363_SC-70-6, from KiCad's library), ready for a KiCad board. 42,479 are in stock at JLCPCB (part C110150). 39 open-source boards in 34 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
9- Collector-emitter, most
- 40 V · Collector−emitter voltage, absolute max · p. 1
- Collector current, most
- 200 mA · Continuous collector current, absolute max · p. 1
- Junction, hottest
- 150 °C · Junction temperature, max · p. 1
- Junction to air (SOT−363)
- 833 K/W · Junction−to−ambient, max; FR4 board, minimum recommended footprint · p. 1
- Current gain, least
- 40 · DC current gain, min; IC = 0.1 mAdc, VCE = 1.0 Vdc · p. 2
- Current gain, least
- 70 · DC current gain, min; IC = 1.0 mAdc, VCE = 1.0 Vdc · p. 2
- Current gain, least
- 100 · DC current gain, min; IC = 10 mAdc, VCE = 1.0 Vdc · p. 2
- Current gain, least
- 60 · DC current gain, min; IC = 50 mAdc, VCE = 1.0 Vdc · p. 2
- Current gain, least
- 30 · DC current gain, min; IC = 100 mAdc, VCE = 1.0 Vdc · p. 2
What it is and has
4- Device
- Dual general purpose transistors · p. 1
- DC current gain
- 100−300 · p. 1
- Collector−emitter saturation voltage
- ≤ 0.4 V · p. 1
- Packing
- 8 mm, 7−inch/3,000 unit tape and reel · p. 1
Specifications
37| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Collector −Emitter Voltage VCEO | max 40 Vdc | 1 | |
| Collector −Base Voltage VCBO | max 60 Vdc | 1 | |
| Emitter −Base Voltage VEBO | max 6 Vdc | 1 | |
| Collector Current − Continuous IC | max 200 mAdc | 1 | |
| Total Package Dissipation (Note 1) PD | TA = 25°C; FR4 glass epoxy printed circuit board using the minimum recommended footprint | max 150 mW | 1 |
| Thermal Resistance, Junction−to−Ambient RqJA | SOT−363; FR4 glass epoxy printed circuit board using the minimum recommended footprint | max 833 °C/W | 1 |
| Junction and Storage Temperature Range TJ, Tstg | min -55 · max 150 °C | 1 | |
| Collector −Emitter Breakdown Voltage (Note 2) V(BR)CEO | TA = 25°C; IC = 1.0 mAdc, IB = 0; pulse test | min 40 Vdc | 2 |
| Collector −Base Breakdown Voltage V(BR)CBO | TA = 25°C; IC = 10 mAdc, IE = 0 | min 60 Vdc | 2 |
| Emitter −Base Breakdown Voltage V(BR)EBO | TA = 25°C; IE = 10 mAdc, IC = 0 | min 6 Vdc | 2 |
| Base Cutoff Current IBL | TA = 25°C; VCE = 30 Vdc, VEB = 3.0 Vdc | max 50 nAdc | 2 |
| Collector Cutoff Current ICEX | TA = 25°C; VCE = 30 Vdc, VEB = 3.0 Vdc | max 50 nAdc | 2 |
| DC Current Gain hFE | TA = 25°C; IC = 0.1 mAdc, VCE = 1.0 Vdc; pulse test | min 40 − | 2 |
| DC Current Gain hFE | TA = 25°C; IC = 1.0 mAdc, VCE = 1.0 Vdc; pulse test | min 70 − | 2 |
| DC Current Gain hFE | TA = 25°C; IC = 10 mAdc, VCE = 1.0 Vdc; pulse test | min 100 · max 300 − | 2 |
| DC Current Gain hFE | TA = 25°C; IC = 50 mAdc, VCE = 1.0 Vdc; pulse test | min 60 − | 2 |
| DC Current Gain hFE | TA = 25°C; IC = 100 mAdc, VCE = 1.0 Vdc; pulse test | min 30 − | 2 |
| Collector −Emitter Saturation Voltage VCE(sat) | TA = 25°C; IC = 10 mAdc, IB = 1.0 mAdc; pulse test | max 0.2 Vdc | 2 |
| Collector −Emitter Saturation Voltage VCE(sat) | TA = 25°C; IC = 50 mAdc, IB = 5.0 mAdc; pulse test | max 0.3 Vdc | 2 |
| Base −Emitter Saturation Voltage VBE(sat) | TA = 25°C; IC = 10 mAdc, IB = 1.0 mAdc; pulse test | min 0.65 · max 0.85 Vdc | 2 |
| Base −Emitter Saturation Voltage VBE(sat) | TA = 25°C; IC = 50 mAdc, IB = 5.0 mAdc; pulse test | max 0.95 Vdc | 2 |
| Current −Gain − Bandwidth Product fT | TA = 25°C; IC = 10 mAdc, VCE = 20 Vdc, f = 100 MHz | min 300 MHz | 2 |
| Output Capacitance Cobo | TA = 25°C; VCB = 5.0 Vdc, IE = 0, f = 1.0 MHz | max 4 pF | 2 |
| Input Capacitance Cibo | TA = 25°C; VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz | max 8 pF | 2 |
| Input Impedance hie | TA = 25°C; VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz | min 1 · max 10 kW | 2 |
| Input Impedance hie | TA = 25°C; VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz; second printed limit line | min 2 · max 12 kW | 2 |
| Voltage Feedback Ratio hre | TA = 25°C; VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz | min 0.5 · max 8 X 10− 4 | 2 |
| Voltage Feedback Ratio hre | TA = 25°C; VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz; second printed limit line | min 0.1 · max 10 X 10− 4 | 2 |
| Small −Signal Current Gain hfe | TA = 25°C; VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz | min 100 · max 400 − | 2 |
| Small −Signal Current Gain hfe | TA = 25°C; VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz; second printed limit line | min 100 · max 400 − | 2 |
| Output Admittance hoe | TA = 25°C; VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz | min 1 · max 40 mmhos | 2 |
| Output Admittance hoe | TA = 25°C; VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz; second printed limit line | min 3 · max 60 mmhos | 2 |
| Noise Figure NF | TA = 25°C; VCE = 5.0 Vdc, IC = 100 mAdc, RS = 1.0 k W, f = 1.0 kHz | max 5 dB | 2 |
| Delay Time td | VCC = 3.0 Vdc, VBE = − 0.5 Vdc; IC = 10 mAdc, IB1 = 1.0 mAdc | max 35 ns | 3 |
| Rise Time tr | VCC = 3.0 Vdc, VBE = − 0.5 Vdc; IC = 10 mAdc, IB1 = 1.0 mAdc | max 35 ns | 3 |
| Storage Time ts | VCC = 3.0 Vdc, IC = 10 mAdc; IB1 = IB2 = 1.0 mAdc | max 200 ns | 3 |
| Fall Time tf | VCC = 3.0 Vdc, IC = 10 mAdc; IB1 = IB2 = 1.0 mAdc | max 50 ns | 3 |
Pins, by the datasheet
6- 1 EMITTER 2
- Emitter of transistor 2; STYLE 1. · p. 8
- 2 BASE 2
- Base of transistor 2; STYLE 1. · p. 8
- 3 COLLECTOR 1
- Collector of transistor 1; STYLE 1. · p. 8
- 4 EMITTER 1
- Emitter of transistor 1; STYLE 1. · p. 8
- 5 BASE 1
- Base of transistor 1; STYLE 1. · p. 8
- 6 COLLECTOR 2
- Collector of transistor 2; STYLE 1. · p. 8
Ordering codes, by the datasheet
4- MBT3904DW1T1G
- SOT−363 · STYLE 1 pinout; Pb−Free; 3000 / Tape & Reel · p. 1
- MBT3904DW2T1G
- SOT−363 · STYLE 27 pinout; Pb−Free; 3000 / Tape & Reel · p. 1
- SMBT3904DW1T1G
- SOT−363 · S prefix for automotive and other applications requiring unique site and control change requirements; AEC−Q101 qualified and PPAP capable; Pb−Free; 3000 / Tape & Reel · p. 1
- NSVMBT3904DW1T3G
- SOT−363 · NSV prefix for automotive and other applications requiring unique site and control change requirements; AEC−Q101 qualified and PPAP capable; Pb−Free; 10000 / Tape & Reel · p. 1
- 2 layers192.4 × 50 mm

- 2 layers67.8 × 55 mm

- 2 layers58.8 × 55.7 mm

AiO i2s DAC
martinroger/ipodesp32
An iPod emulator for 2006-2013 BMW Mini Coopers that need Bluetooth
102 parts24MIT - 2 layers79.1 × 129 mm

- 4 layers145.5 × 64 mm

Muffin
JunOllyLi/TX_PCB
NOTE: the latest PCB had been manufactured was v2.0. But it had the Gimbal ZH-connector reversed. The schematics and PCB drawing had been updated to v2.1 to fix that. But v2.1 had not been really manufactured yet.
138 parts17 - 2 layers65 × 56 mm

- 4 layers80.1 × 78.6 mm

Gb fpga
blazer82/gb.fpga
FPGA-based handheld console that plays games from Gameboy cartridges
151 parts12 - 2 layers48 × 78.2 mm

Parts like it
8LMBT3904DW1T1G
SC-88-55℃~+150℃ 100 150mW 2 NPN 200mA 200mV 300MHz 40V 50nA 6V NPN SC-88 Bipolar (BJT) ROHSLeshan Radio (LRC)Bipolar (BJT)MMDT3906
SOT-363-55℃~+150℃ 100nA 2 PNP 200mA 200mW 300 300MHz 300mV 40V 5V PNP SOT-363 Bipolar (BJT) ROHShongjiachengBipolar (BJT)LMBT3946DW1T1G
SC-88-55℃~+150℃ 100 150mW 2 NPN + 2 PNP 200mA 300MHz 400mV 40V 50nA 6V NPN+PNP SC-88 Bipolar (BJT) ROHSLeshan Radio (LRC)Bipolar (BJT)BC857BS
SOT-363-55℃~+150℃ 15nA 2 PNP 200MHz 200mA 300 300mW 45V 5V 650mV PNP SOT-363 Bipolar (BJT) ROHSFUXINSEMIBipolar (BJT)MMDT3904
SOT-363Bipolar (BJT)hongjiachengMBT3946DW1
SC-88-55℃~+150℃ 1 NPN + 1 PNP 100 150mW 200mA 200mV 300MHz 40V 50nA 6V NPN+PNP SC-88 Bipolar (BJT) ROHSonsemiBipolar (BJT)LMBT3906DW1T1G
SOT-363-55℃~+150℃ 100 150mW 2 PNP 200mA 250MHz 400mV 40V 50nA 5V PNP SOT-363 Bipolar (BJT) ROHSLeshan Radio (LRC)Bipolar (BJT)MMDT3904
SOT-363-55℃~+150℃ 2 NPN 200mA 200mV 200mW 300MHz 40 40V 50nA 5V NPN SOT-363 Bipolar (BJT) ROHSTWGMCBipolar (BJT)
Questions
Is there a KiCad symbol and footprint for the MBT3904DW1?
Yes. The symbol is Transistor_BJT:MBT3904DW1 and the footprint Package_TO_SOT_SMD:SOT-363_SC-70-6, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MBT3904DW1?
SOT-363, with 6 pins. Its footprint is drawn on this page.
Where is the MBT3904DW1 datasheet?
onsemi publishes it: the Datasheet link on this page opens it.
Where can I order the MBT3904DW1?
JLCPCB lists it as part C110150, with 42,479 in stock; the sellers' links on this page open their listings.
What can replace the MBT3904DW1?
Parts like it in the library: the LMBT3904DW1T1G by Leshan Radio (LRC), the MMDT3906 by hongjiacheng, the LMBT3946DW1T1G by Leshan Radio (LRC) and the BC857BS by FUXINSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MBT3904DW1?
39 boards in 34 repositories on GitHub; the most starred are listed on this page, with their KiCad files.