

AIS Receiver
Homemade AIS Receiver with ESP32
- Size
- 48 × 78.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 81
- Pads
- 298
- Tracks, vias
- 1,590, 150
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 5 Apr 2018
- Updated
- 17 Jan 2021
Overview
AIS Receiver is an open-source printed circuit board by cmbahadir, from the cmbahadir/AIS-Receiver repository on GitHub. It is a 2-layer board of 48 × 78.2 mm with 73 parts on 81 nets, routed with 1,590 tracks and 150 vias.
It is built around the ESP32-WROOM-32, FT231XS-R and LIS331HH, with the SI4464DY, BAT48JFILM and MBT3904DW1 among its other parts. Its parts include 22 resistors, 20 capacitors, 6 ICs, 5 diodes and 4 connectors. It belongs with the ESP32 boards of this library.
Main components
6ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesFT231XS-R
SSOP-20-150mil-40℃~+85℃ 125uA 5V 8.4mA USB 2.0 USB to UART SSOP-20-150mil USB Converters ROHSFTDIUSB ConvertersLIS331HH
LGA-16(3x3)-40℃~+85℃ 10uA 16bit 2.16V~3.6V Accelerometer SPI、I2C X,Y,Z ±24g LGA-16(3x3) Accelerometers ROHSSTMicroelectronicsAccelerometersSI4464DY
SOIC-81 N-channel 18nC@10V 2.2A 2.5W 200V 260mΩ@6V 4V N-Channel SOIC-8 MOSFETs ROHSVishay IntertechnologyMOSFETsBAT48JFILM
SOD-32325uA@40V 350mA 40V 900mV@500mA Independent SOD-323 Schottky Diodes ROHSSTMicroelectronicsSchottky DiodesMBT3904DW1
SOT-363-55℃~+150℃ 100 150mW 2 NPN 200mA 300MHz 300mV 40V 50nA 6V NPN SOT-363 Bipolar (BJT) ROHSonsemiBipolar (BJT)
README
README.mdAIS Receiver by CMB
Please be aware that this project is still under construction.
Required: https://github.com/KiCad/kicad-library
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Resistors_SMD:R_0603_HandSoldering | R3, R4, R9, R11, R15, R19, R21 |
| 5 | 0.1uF | Capacitors_SMD:C_0603_HandSoldering | C2, C9, C10, C13, C15 |
| 3 | 100R | Resistors_SMD:R_0603_HandSoldering | R1, R2, R8 |
| 3 | 1uF | Capacitors_SMD:C_0603_HandSoldering | C3, C4, C18 |
| 3 | 4.7uF | Capacitors_SMD:C_0603_HandSoldering | C6, C8, C14 |
| 2 | 100pF | Capacitors_SMD:C_0603_HandSoldering | C1, C16 |
| 2 | 1K | Resistors_SMD:R_0603_HandSoldering | R10, R12 |
| 2 | 22pF | Capacitors_SMD:C_0603_HandSoldering | C19, C20 |
| 2 | 27R | Resistors_SMD:R_0603_HandSoldering | R17, R18 |
| 2 | 2K | Resistors_SMD:R_0603_HandSoldering | R13, R14 |
| 2 | 330R | Resistors_SMD:R_0603_HandSoldering | R5, R16 |
| 2 | 4.7K | Resistors_SMD:R_0603_HandSoldering | R6, R7 |
| 2 | 47pF | Capacitors_SMD:C_0603_HandSoldering | C11, C12 |
| 2 | CONN_01X20 | Pin_Headers:Pin_Header_Straight_1x20_Pitch2.54mm | J2, J3 |
| 2 | Jumper | Capacitors_SMD:C_0603 | JP1, JP2 |
| 1 | 100 K | Resistors_SMD:R_0603_HandSoldering | R20 |
| 1 | 100K | Resistors_SMD:R_0603_HandSoldering | R22 |
| 1 | 100nF | Capacitors_SMD:C_0603_HandSoldering | C17 |
| 1 | 10uF | Capacitors_SMD:C_0805_HandSoldering | C7 |
| 1 | 12 pF | Capacitors_SMD:C_0603_HandSoldering | CR2 |
| 1 | 160 nH | Capacitors_SMD:C_0805_HandSoldering | LR1 |
| 1 | 2.2uF | Capacitors_SMD:C_0603_HandSoldering | C5 |
| 1 | 2.5A/30V | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1 |
| 1 | 220 pF | Capacitors_SMD:C_1210_HandSoldering | CR3 |
| 1 | 240 nH | Capacitors_SMD:C_0402 | LR2 |
| 1 | 30MHz | Crystals:Crystal_SMD_0603-4pin_6.0x3.5mm_HandSoldering | X1 |
| 1 | 500mA | Fuse_Holders_and_Fuses:Fuse_SMD1206_Wave | F1 |
| 1 | 6 pF | Capacitors_SMD:C_0603_HandSoldering | CR1 |
| 1 | AP2112K-3.3V | TO_SOT_Packages_SMD:SOT-23-5 | U2 |
| 1 | Antenna | Connectors_Molex:Molex_Microcoaxial_RF | VHF |
| 1 | BAT48JFILM | Si4464:SOD-323 | D1 |
| 1 | BLUE | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | D4 |
| 1 | BUFFER_RESET | Buttons_Switches_SMD:SW_SPST_B3SL-1002P | BUFFER |
| 1 | CONN_01X01 | Si4464:microVia | J5 |
| 1 | ESP32-WROOM | ESP32-footprints-Lib:ESP32-WROOM | U1 |
| 1 | FT231XS | SMD_Packages:SSOP-20 | U5 |
| 1 | GREEN | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | D2 |
| 1 | JP2 | Connectors_JST:JST_EH_S02B-EH_02x2.50mm_Angled | BATT |
| 1 | LIS331HH | Si4464:LGA-16-3x3 | U4 |
| 1 | MBT3904DW1 | Si4464:SOT-363 | Q2 |
| 1 | MCP73811T-420I/OT | TO_SOT_Packages_SMD:SOT-23-5 | U3 |
| 1 | RED | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | D3 |
| 1 | RESET | Buttons_Switches_SMD:SW_SPST_B3SL-1002P | RESET |
| 1 | SI4464 | Si4464:Si4464 | U6 |
| 1 | SPI | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | J1 |
| 1 | USB_OTG | Si4464:USB_Micro-B | USB |
| 1 | YELLOW | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | D5 |
Similar boards
- 2 layers67.8 × 55 mm

- 2 layers79.1 × 129 mm

- 4 layers25.9 × 55.9 mm

- 4 layers93.3 × 83.9 mm

- 2 layers85 × 54 mm

- 2 layers65 × 56 mm

RPi Hat
omc8db/DigitalVoice
An open source codec2 based handheld digital radio for VHF/UHF amateur bands
76 parts1Apache-2.0 - 4 layers30 × 55 mm

- 4 layers20.3 × 47.5 mm

Rocket ejection
jonnydyer/rocket_ejection
Telemetry recorder and ejection driver for model rockets
52 parts
Questions
How big is the AIS Receiver PCB?
It measures 48 × 78.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AIS Receiver use?
73 parts, built around the ESP32-WROOM-32, FT231XS-R, LIS331HH and SI4464DY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AIS Receiver KiCad files?
From the cmbahadir/AIS-Receiver repository on GitHub, at the commit this page was made from: the board is Project/AISReceiver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AIS Receiver design in my own project?
Its repository states no licence, so its author keeps all rights: ask cmbahadir before reusing the design.