Skip to the content
PCBKitNew board
LIS331HH on a board, in 3D

LIS331HH

STMicroelectronics

-40℃~+85℃ 10uA 16bit 2.16V~3.6V Accelerometer SPI、I2C X,Y,Z ±24g LGA-16(3x3) Accelerometers ROHS

Extended
DatasheetJLCPCBLCSCst/LIS331HH
Category
Accelerometers
Package
LGA-16(3x3)
Pins
16

Overview

The LIS331HH is an accelerometer made by STMicroelectronics in a LGA-16(3x3) package with 16 pins. -40℃~+85℃ 10uA 16bit 2.16V~3.6V Accelerometer SPI、I2C X,Y,Z ±24g LGA-16(3x3) Accelerometers ROHS.

PCBKit's library has its KiCad symbol (Sensor_Motion:LIS331HH, from KiCad's library) and its footprint (Package_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y, from KiCad's library), ready for a KiCad board. 9 are in stock at JLCPCB (part C2655073). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

Vdd_IO1SCL/SPC4GND5SDA/SDI6SA0/SDO7CS8INT29INT111Vdd14
Sensor_Motion:LIS331HHFrom KiCad's library

Footprint

12345678910111213141516
Package_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5yFrom KiCad's library

Parameters

8
Acceleration Measurement Range (MAX)
±24g
Accelerometer Sensing Axis
X,Y,Z
Interface
I2C
Operating Temperature
-40℃~+85℃
Output Bits
16bit
Sensor Type
Accelerometer
Standby Current
10uA
Voltage - Supply
2.16V~3.6V

Order codes

1

Pinout

16
The pins of the LIS331HH
PinNameType
1Vdd_IOPower in
2NCNot connected
3NCNot connected
4SCL/SPCInput
5GNDPower in
6SDA/SDIInput/output
7SA0/SDOOutput
8CSInput
9INT2Output
10GNDPassive
11INT1Output
12GNDPassive
13GNDPassive
14VddPower in
15VddPassive
16GNDPassive

Open-source boards using it

All 4
  • 2 layers48 × 78.2 mmAIS Receiver, the printed circuit board in 3D

    AIS Receiver

    cmbahadir/AIS-Receiver

    Homemade AIS Receiver with ESP32

    73 parts11
  • 4 layers30 × 55 mmAvionics Board, the printed circuit board in 3D

    Avionics Board

    ModelRocketryAvionics/Avionics-Board

    Avionics PCB for Model Rocketry

    67 parts8
  • 4 layers20.3 × 47.5 mmRocket ejection, the printed circuit board in 3D

    Rocket ejection

    jonnydyer/rocket_ejection

    Telemetry recorder and ejection driver for model rockets

    52 parts
  • 2 layers74 × 25 mmRakieta, the printed circuit board in 3D

    Rakieta

    PTR-projects/PTR_arecorder

    A compact, high-g flight data recorder designed specifically for model and amateur rocketry. The Arecorder logs 3-axis acceleration and orientation data to an SD card during launch, ascent, apogee, and recovery.

    83 partsMIT

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/st/LIS331HH" title="LIS331HH in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/st/LIS331HH.jpg" alt="LIS331HH" width="1200" height="900">
A picture that opens the part, for a README
[![LIS331HH](https://pcbkit.io/embed/parts/st/LIS331HH.jpg?size=s)](https://pcbkit.io/parts/st/LIS331HH)

Questions

Is there a KiCad symbol and footprint for the LIS331HH?

Yes. The symbol is Sensor_Motion:LIS331HH and the footprint Package_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LIS331HH?

LGA-16(3x3), with 16 pins. Its footprint is drawn on this page.

Where is the LIS331HH datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LIS331HH?

JLCPCB lists it as part C2655073, with 9 in stock; the sellers' links on this page open their listings.

What can replace the LIS331HH?

Parts like it in the library: the LIS3DH by STMicroelectronics, the ICM-20602 by TDK InvenSense and the LIS3DHH by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LIS331HH?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

3