4 layers40 × 14 mm
Rs probe
probe-rs/rusty-probe
This is an open hardware probe for the Serial Wire Debug (SWD) and JTAG protocol. Based on the RP2040 MCU.
108 parts170
Open-source KiCad boards
53 match “probe-rs”Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 4 layers40 × 14 mm
- 4 layers40 × 14 mm
Hs probe
probe-rs/hs-probe
This is an open hardware probe for the Serial Wire Debug (SWD) and JTAG protocol. It utilizes an STM32F723 MCU which has an USB 2.0 High-speed Phy.
57 parts145 - 4 layers85 × 56 mm
Probe shield
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
18 parts15 - 4 layers50 × 50 mm
Probe
Carciax/EEE4022S_Salinity_JCP24-03
This project focused on the design of a salinity sensor for measuring the salinity of the sea water beneath the Antarctica ice caps which had a unique habitat and salinity range due to the ice caps expelling large…
83 parts - 2 layers100 × 100 mm
DC line module+Meter probe
kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.
100 parts3MIT - 4 layers100 × 20 mm
H field probe 1x3mm
Jameswill-Winsock/Tempest
An FPGA based implementation to demonstrate side-channel attacks on modern cryptography algorithms such as AES, RSA, ML-KEM etc.
6 parts1GPL-3.0 - 4 layers67 × 54 mm
ESP32 SIFIVE 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
81 parts15 - 4 layers67 × 54 mm
ATSAMD 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
66 parts15 - 4 layers67 × 54 mm
Daughterboard template
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
2 parts15 - 4 layers67 × 54 mm
LPC 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
63 parts15 - 4 layers67 × 54 mm
NRF 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
56 parts15 - 4 layers67 × 54 mm
STM32 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
61 parts15 - 4 layers85 × 66 mm
Target stack shield
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
44 parts15 - 2 layers85 × 60 mm
Testboard
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
31 parts15 - 2 layers47.9 × 31.7 mm
- 4 layers53 × 42 mm
MioLink
Misaka0x2730/MioLink
ARM JTAG/SWD debugger (BlackMagic port) based on RP2040.
117 parts30GPL-3.0 - 2 layers73.7 × 38.1 mm
- 2 layers152.1 × 36 mm
ESProbeScope3300
noahensley/kicad-probe-scope
A KiCad PCB design created for ETEC 3300. The board is built around the ESP32-S2FN4R2 and combines USB-C connectivity, 2.4 GHz Wi-Fi (via an on-board chip antenna), a battery charging circuit, an LDO power rail, an…
77 partsMIT - 4 layers53 × 42 mm
MioLink
Misaka0x2730/MioLink
ARM JTAG/SWD debugger (BlackMagic port) based on RP2040.
112 parts30GPL-3.0 - 4 layers53 × 54 mm
MioLink Pico
Misaka0x2730/MioLink
ARM JTAG/SWD debugger (BlackMagic port) based on RP2040.
73 parts30GPL-3.0 - 2 layers73.7 × 38.1 mm
- 2 layers73.7 × 38.1 mm
- 4 layers39.4 × 96 mm
Mx master remake
great-houk/mx_master_remake
[probe-rs]: https://crates.io/crates/probe-rs [defmt]: https://github.com/knurling-rs/defmt [flip-link]: https://github.com/knurling-rs/flip-link
79 parts1MIT