
TXU0202 UART Level Translator
jakeson21/Small-KiCAD-Projects
Collection of one-off KiCAD projects
Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

jakeson21/Small-KiCAD-Projects
Collection of one-off KiCAD projects

96boards/96boards-uart
96Boards UART adapter hardware design files

tschiemer/midi-uart-adapter
PCB layout for a simple MIDI (In-Through-Out) / UART - Adapter according to MIDI 1.0 Specification

Deco025/resonare
Resonare: open-source 120 W LCC-S resonant wireless charger, transmitter and receiver boards (KiCad 10, 4-layer)

adaptableCoder/USB-to-UART-CH340g-PCB
PCB design for USB-to-UART converter based on CH340G with a USB-A edge connector.


koggertech/Kogger_UART_WiFi_Bridge
Open-source ESP32-C3 UART to Wi-Fi bridge: firmware (ESP-IDF), KiCad 10 board, datasheet. Two UART lines relayed to UDP/TCP as whole frames, station or AP with DHCP, control over Kogger SBP, OTA with rollback.

clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini


doanxuanquynh2004-source/usb-uart-ch340c
USB Type-C to UART TTL converter using CH340C, designed in KiCad.

Finomnis/usb-uart-plug
A cable termination that converts a USB-C into USB+UART pads

Jonny999999/powerMonitor-esp32
Firmware and hardware for measuring voltage, current, and power using PZEM-004T modules with ESP32, and publishing the data via MQTT.

mibs510/UART-Bus-Board-V2
A UART bus to configure MKS SERVO42C closed looped stepper drivers on my 5' x 6.5' laser CNC

Noraiz963/USB-to-Serial-Converter
A minimal USB-C to UART bridge board built around the CP2102 USB-to-UART bridge IC. This board exposes TX, RX, RST, VBUS, and GND on a standard header, letting you connect any UART-based microcontroller or device to a…


solderdemon/usb-to-uart
A compact USB-C to 5V UART adapter based on the WCH CH340C.


dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

BoomBoxRobotics/Anubis
Anubis is a project to create the ultimate open source RC controller utilizing inexpensive consumer parts and clever programming.




