Skip to the content

Open-source KiCad boards

125 match “TDK”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers65 × 60 mmMicroduck TDK Power R8, the printed circuit board in 3D

    Microduck TDK Power R8

    ldcyes/OpenDuck

    已完成可编辑原理图、真实四层 PCB 和本地库。阶梯板面积 4510 mm²,比原 65×60 + 32×30 mm 两板总面积 4860 mm² 少 350 mm²(7.20%)。原 TDK 模块本体、四个安装孔和原 TDK 器件位置保留,回生电容采用原料号卧装,J1 因实际拔插通道冲突改为同系列 BM08 顶插。当前为工程候选,未制造,未完成热、回生瞬态、低电量或行走验收。

    47 parts
  • 2 layersMems tdk, the printed circuit board in 3D

    Mems tdk

    wetdog/mems-micros

    ICS-43432 mems breakout circular board

    10 partsMIT
  • 2 layers9.9 × 7.9 mmIcs43434 breakout, the printed circuit board in 3D

    Ics43434 breakout

    expoman/tdk_ics-43434_breakout

    small breakout board for the TDK ICS-43434 microphone chip

    5 parts2GPL-3.0
  • 2 layers100 × 100 mmMain PCB ver2, the printed circuit board in 3D

    Main PCB ver2

    RobotClubKut/IntelligentRobot_tdk

    60 parts2
  • 2 layers109.2 × 86.4 mmÖntözőberendezés, the printed circuit board in 3D

    Öntözőberendezés

    CITROMOSEPER/4-zone-irrigation-system-2026-TDK-Project

    Négyzónás, ESP32-alapú adatvezérelt öntözőrendszer: érzékelők és időjárás-előrejelzés alapján dönt a vízadagról, három üzemmóddal, telefonos webes felülettel és biztonsági réteggel. TDK-projekt, Óbudai Egyetem, 2026.

    59 parts1MIT
  • 2 layers35 × 25 mmColor sensor, the printed circuit board in 3D

    Color sensor

    RobotClubKut/IntelligentRobot_tdk

    22 parts2
  • 2 layers140 × 40 mmLine sensor ver2, the printed circuit board in 3D

    Line sensor ver2

    RobotClubKut/IntelligentRobot_tdk

    36 parts2
  • 2 layers200 × 150 mmMain PCB, the printed circuit board in 3D

    Main PCB

    RobotClubKut/IntelligentRobot_tdk

    50 parts2
  • 2 layers168.9 × 123.3 mmOEM ECU, the printed circuit board in 3D

    OEM ECU

    aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware

    Volvo MKII Open Hardware

    296 parts161CC0-1.0
  • 14 layers55 × 40 mmPolarfire som, the printed circuit board in 3D

    Polarfire som

    antmicro/polarfire-som

    System on Module based on Microchip PolarFire MPFS250T SoC

    473 parts48Apache-2.0
  • 4 layers18 × 13 mmMumo, the printed circuit board in 3D

    Mumo

    kounocom/Mumo

    A compact 13×18mm IMU module featuring the TDK InvenSense ICM-45686 6-axis IMU with integrated 32.768kHz clock and QST QMC6309H 3-axis magnetometer.

    25 parts41CERN-OHL-S-2.0
  • 2 layers160 × 100 mmRedPitaya Lockbox, the printed circuit board in 3D

    RedPitaya Lockbox

    TU-Darmstadt-APQ/RedPitaya-Lockbox

    Digital controller for laser frequency stabilization based on the RedPitaya STEMlab 125-14 board

    110 parts40
  • 6 layers107 × 68 mmCm4-baseboard, the printed circuit board in 3D

    Cm4-baseboard

    antmicro/cm4-baseboard

    Experimental baseboard supporting System on Modules with Raspberry Pi CM4/CM5 pinout

    516 parts36Apache-2.0
  • 4 layers75.9 × 96.1 mmLMS8001 Companion, the printed circuit board in 3D

    LMS8001 Companion

    myriadrf/LMS8001-Companion

    Highly configurable 4-channel frequency shifter platform utilising the LMS8001A RFIC

    1,071 parts36
  • 2 layers25.8 × 11.5 mmICP-10100-breakout, the printed circuit board in 3D

    ICP-10100-breakout

    astuder/icp-101xx

    Arduino library and breakout board for the TDK InvenSense ICP-101xx barometric perssure sensors

    16 parts29BSD-2-Clause
  • 2 layers160 × 100 mmRedPitaya IntStab, the printed circuit board in 3D

    RedPitaya IntStab

    TU-Darmstadt-APQ/RedPitaya-IntStab

    Digital controller for laser intensity stabilization based on the RedPitaya STEMlab 125-14 board

    127 parts28
  • 4 layers18.5 × 15 mmOpenstint transponder, the printed circuit board in 3D

    Openstint transponder

    zsellera/openstint-transponder

    Reference design of OpenStint transponder with ATTiny816

    39 parts14
  • 10 layers120.4 × 90 mmBmc reference carrier board, the printed circuit board in 3D

    Bmc reference carrier board

    antmicro/dc-scm-osm-l-carrier-card

    DC-SCM Card supporting OSM-L System on Modules

    568 parts13Apache-2.0
  • 4 layers67.3 × 36.8 mmBadge kicad, the printed circuit board in 3D

    Badge kicad

    netik/dc25_spqr_badge

    KiCad files and all component files to manufacture the IDES OF DEF CON Badge, an Unofficial Electronic Badge.

    100 parts11Apache-2.0
  • 4 layers66.1 × 75.8 mmStm audio board V3, the printed circuit board in 3D

    Stm audio board V3

    Papproni/Digital_guitar_effect

    This repostiroy is created to work on a digital guitar effect which makes use of DSP algorythms, and hardware.

    149 parts10MIT
  • 6 layers52 × 43 mmCm4-lvds adapter, the printed circuit board in 3D

    Cm4-lvds adapter

    antmicro/cm4-baseboard-lvds-adapter

    Adapter board converting MIPI DSI into LVDS with additional circuitry for integrating custom displays

    155 parts7Apache-2.0
  • 2 layers69 × 28 mmLaser Backplane DVI, the printed circuit board in 3D

    Laser Backplane DVI

    TU-Darmstadt-APQ/Laser_Backplane_DVI

    Laser backplane with DVI connector featuring fast current modulation and a laser diode protection.

    47 parts7CERN-OHL-W-2.0
  • 6 layers80 × 150 mmLESHY2-RF R2, the printed circuit board in 3D

    LESHY2-RF R2

    anton-vinogradov/esp32-leshy2

    Open multiband RF handheld on ESP32-S3 + ESP32-C5 — successor to esp32-leshy / ESP32-DIV

    784 parts6MIT
  • 2 layers45 × 73 mm6632B binding posts, the printed circuit board in 3D

    6632B binding posts

    PatrickBaus/HP6632B_binding_posts

    A PCB for mounting front panel binding posts on the HP 66332A and HP 6632B-6634B

    21 parts6CERN-OHL-W-2.0

Parts matching “TDK”

See them in the parts library