Skip to the content
4 layers75.9 × 96.1 mmLMS8001 Companion, the printed circuit board in 3D

Highly configurable 4-channel frequency shifter platform utilising the LMS8001A RFIC

Size
75.9 × 96.1 mm
Copper layers
4
Thickness
1.6 mm
Parts
1,071
Nets
211
Pads
1,758
Tracks, vias
2,038, 174
Pours
64
Routed
Yes
KiCad
KiCad 3
Created
17 Oct 2017
Updated
2 Nov 2026

Overview

LMS8001 Companion is an open-source printed circuit board by myriadrf, from the myriadrf/LMS8001-Companion repository on GitHub. It is a 4-layer board of 75.9 × 96.1 mm with 1,071 parts on 211 nets, routed with 2,038 tracks and 174 vias.

It is built around the AP7361-33E and NCR2-113+. Its parts include 155 capacitors, 95 resistors, 24 connectors, 12 inductors and 6 ICs.

Main components

2

README

README.md

LMS8001-Companion

LimeSDR board

The LMS8001-Companion board provides a highly integrated, highly configurable, four-channel frequency shifter platform, utilising the LMS8001A integrated circuit. One of the typical applications is extending Lime Micro transceiver family RF frequency range up to 10 GHz.

  • LMS8001A Integrated Circuit
    • Single chip up/down RF frequency shifter with continuous coverage up to 10 GHz RF output range
    • Four independent highly reconfigurable RF paths all driven by the same LO
    • Fully differential signals
    • Few external components
    • Low voltage operation, 1.2 and 1.8V. Integrated LDOs to run on a single 1.8 V supply
    • 56-pin QFN package
    • Serial Port Interface
    • Power down control available via ENABLE pins and/or equivalent SPI registers
    • Synchronous loading of pre-set operation profiles by GPIO pins. More options are also available using corresponding SPI registers
  • Connections
    • 4 x SMA connectors - RF
    • 4 x UFL connectors – RF
    • 1 x SMA connector – External LO
    • 1 x UFL connector – External clock reference
  • RF Matching
    • Channel A Input (UFL) – 1–3 GHz broadband, using TC1-1-13M+ balun
    • Channel B Input (UFL) – 1–3 GHz broadband, using TC1-1-13M+ balun
    • Channel C Input (SMA) – 10 GHz band, using NCR2-113+ balun
    • Channel D Input (SMA) – 5 GHz band, using NCR2-113+ balun
    • Channel A Output (SMA) – 10 GHz band, using NCR2-113+ balun
    • Channel B Output (SMA) – 5 GHz band, using NCR2-113+ balun
    • Channel C Output (UFL) – 1–3 GHz broadband, using TC1-1-13M+ balun
    • Channel D Output (UFL) – 1–3 GHz broadband, using TC1-1-13M+ balun
  • USB Interface
    • USB - mini B (STM32 controller STM32F105RBT6)
  • Clock System
    • 40MHz on board VCTCXO
    • Possibility to lock VCTCXO to external clock
  • Board Size
    • 60mm x 100mm (2.36’’ x 3.94’’)

Contents

The directory structure is as follows:

text
  docs/                      - Quick Starter Manual

  drivers/                   - STM32 DFU & VCP Windows drivers
     
  hardware/<version>/
      BOM/                   - bill of materials spreadsheet
      Gerbers/               - Gerber CAM files
      KiCAD/                 - KiCAD schematic and layout files
      Manufacturing/         - Additional manufacturing information
      PDF/                   - Schematic and layout PDFs
      Reports/               - DRC, ERC and drill reports

Please note that firmware has been moved to a dedicated repo.

Associated projects

LMS8 Suite

Utilities for use with hardware based upon LMS8001 RFICs from Lime Microsystems:

LMS8001 PLL-Sim

An LMS8001 PLL simulator:

LMS8001 Documentation

Licensing

Documentation

Documentation is licensed under a Creative Commons Attribution 4.0 International licence.

Hardware

The hardware designs is licensed under the Solderpad Hardware License v2.1

Parts

1,071
QtyValueFootprintReferences
620Val**VIA_600_400Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref** +604
29REFTL_I_5VAL, VAL, VAL, VAL, VAL, VAL, VAL, VAL, VAL, VAL, VAL, VAL, VAL, VAL, VAL, VAL +13
26100NF_0402SMD0402C28, C31, C33, C34, C36, C38, C39, C100, C159, C162, C164, C171, C172, C173, C176, C178 +10
241UF_0201_TDK_X5RSMD0201C1, C2, C11, C12, C13, C15, C16, C17, C18, C21, C22, C23, C131, C132, C133, C134 +8
22NFSMD0201C108, C110, C111, C112, C113, C114, C115, C116, C117, C118, C127, C128, C129, C151, C153, C154 +6
20VAL**BreakHoleBreakHole, BreakHole, BreakHole, BreakHole, BreakHole, BreakHole, BreakHole, BreakHole, BreakHole, BreakHole, BreakHole, BreakHole, BreakHole, BreakHole, BreakHole, BreakHole +4
19FB_0201SMD0201FB1, FB2, FB3, FB4, FB5, FB6, FB10, FB11, FB12, FB13, FB14, FB15, FB25, FB26, FB27, FB28 +3
19VAL**GND_VIAGND_VIA, GND_VIA, GND_VIA, GND_VIA, GND_VIA, GND_VIA, GND_VIA, GND_VIA, GND_VIA, GND_VIA, GND_VIA, GND_VIA, GND_VIA, GND_VIA, GND_VIA, GND_VIA +3
180R_0402SMD0402R37, R39, R42, R43, R50, R52, R53, R54, R56, R107, R109, R110, R115, R116, R128, R201 +2
13REFTL_IVAL, VAL, VAL, VAL, VAL, VAL, VAL, VAL, VAL, VAL, VAL, VAL, VAL
1210K_0402SMD0402R2, R3, R10, R11, R12, R14, R15, R18, R19, R20, R41, R70
1210PF_0201SMD0201C94, C101, C102, C103, C104, C106, C137, C138, C143, C144, C147, C150
111NF_0201SMD0201C4, C8, C10, C14, C19, C20, C25, C141, C142, C145, C146
10330R_0402SMD0402R9, R17, R21, R22, R23, R24, R25, R26, R27, R28
90R_0402_NFSMD0402R38, R40, R44, R80, R104, R105, R108, R210, R211
910UF_0603SMD0603C35, C42, C66, C77, C81, C86, C160, C200, C201
91UF_0402SMD0402C37, C51, C52, C53, C54, C55, C58, C63, C65
80R_0201_NFSMD0201R47, R48, R49, R90, R94, R95, R96, R97
7CONN_1FiducialP4, P4, P4, P4, P4, P4, P4
6CONN_1CONN_1P1, P12, P13, P14, P15, P16
6LEDLED_0603LD1, LD2, LD3, LD4, LD5, LD6
5470R_0402SMD0402R6, R7, R8, R16, R67
5FB_60R_0805SMD0805FB17, FB18, FB19, FB20, FB21
5UMC_SMDUMC_SMDJ5, J6, J10, J11, J13
40R_0402IND_0402L5, L7, L9, L11
410NF_0402SMD0402C165, C168, C175, C177
410pFSMD0201C119, C120, C123, C124
41NF_0402SMD0402C68, C163, C166, C174
434K8_0402SMD0402R30, R32, R34, R36
44.7UF_0402SMD0402C60, C61, C62, C64
48.2NH_0402IND_0402L6, L8, L10, L12
4AP7361U-DFN3030-8U5, U6, U7, U8
4NCR2-113+NCR2-113+T2, T3, T6, T7
4SMA_HSMA_HJ4, J7, J8, J9
4TR_5400BL15B0505400BL15B050_nosilkT4, T8, T10, T14
4TR_TC1-1-13M+TC1-1-13M+T5, T9, T11, T15
4VAL**Mounting PadMounting Pad, Mounting Pad, Mounting Pad, Mounting Pad
30.3pFSMD0201C125, C126, C130
30R_0201SMD0201R1, R91, R92
347R_0402SMD0402R76, R77, R78
38.2NH_0402SMD0201L13, L14, L15
3REFTL_C_5x5VAL, VAL, VAL
20.1pFSMD0201C139, C140
20.5pFSMD0201C107, C152
20.7pFSMD0201C135, C136
20.9pFSMD0201C105, C148
20R_0805SMD0805R93, R98
21UF_0603SMD0603C59, C82
222PF_0402SMD0402C29, C30
222R_0402SMD0402R4, R5
239R_0402SMD0402R121, R122
249R9_0402SMD0402R113, R124
251R_0402SMD0402R74, R79
2CSMD0201C109, C157
2MCU_SWDHDRGPIOP2, P3
2NCP702_3V3NCP702_TSOP5U9, U16
2REFTL_C_5X5_SMVAL, VAL
10.4PF_0201SMD0201C161
10RSMD0201R46
11.2NF_0402SMD0402C69
11.6nHSMD0201L2
110PF_0402SMD0402C76
110R_0402SMD0402R66
110UF_1206SMD1206C57
1110K_0402SMD0402R31
118NF_0402SMD0402C99
119K6_0402SMD0402R29
11K_0402SMD0402R69
11M_0402SMD0402R13
1220PF_0402SMD0402C80
123K2_0402SMD0402R33
12pFSMD0201C149
13.9NF_0402SMD0402C32
133R2_0402SMD0402R112
144K2_0402SMD0402R35
1470NF_0402SMD0402C70
14K99_0402SMD0402R45
14K99_0402_NFSMD0402R114
15K1_0402SMD0402R65
1680R_0402SMD0402R55

The 1,044 most common of 1,071 parts.

More from myriadrf/LMS8001-Companion

1
  • 4 layers75.9 × 96.1 mmLMS8001 Companion, the printed circuit board in 3D

    LMS8001 Companion

    myriadrf/LMS8001-Companion

    Highly configurable 4-channel frequency shifter platform utilising the LMS8001A RFIC

    1,070 parts36

Similar boards

  • 6 layers177.2 × 192.6 mmFrontEnd 5G, the printed circuit board in 3D

    FrontEnd 5G

    myriadrf/LimeRFE-8001P

    LMS8001 based RF front-end with up/down conversion and predistortion

    7,251 parts2
  • 2 layers47.8 × 42.4 mmLO daughter, the printed circuit board in 3D

    LO daughter

    leonardobove/qpcb

    QPCB: Quantum Pulse Conversion Board

    43 parts
  • 4 layers68.6 × 53.3 mmIcezum, the printed circuit board in 3D

    Icezum

    FPGAwars/icezum

    :star2: IceZUM Alhambra: an Arduino-like Open FPGA electronic board

    218 parts357GPL-3.0
  • 2 layers103.9 × 43.5 mmCps2 digiav, the printed circuit board in 3D

    Cps2 digiav

    marqs85/cps2_digiav

    CPS2 digital AV interface

    146 parts49
  • 2 layers118.2 × 73 mmPCEHD, the printed circuit board in 3D

    PCEHD

    wifiber/PCEHD

    PC Engine HDMI

    165 parts7
  • 4 layers68.6 × 53.3 mmIcezum, the printed circuit board in 3D

    Icezum

    nicolasarcila-eng/Alhambra-II

    The project documentation is located in the wiki

    226 partsGPL-3.0
  • 2 layers61.8 × 47.5 mmESP32-S3-WROOM-1, the printed circuit board in 3D

    ESP32-S3-WROOM-1

    OscRos03/mccx11_hardware

    LoRa Based Cat Tracker Hardware

    48 parts2MIT
  • 4 layers198 × 161 mmGPDI ULX3S panel, the printed circuit board in 3D

    GPDI ULX3S panel

    goran-mahovlic/ulx3s-extensions

    PMOD boards for ULX3S

    1,070 parts49

Questions

How big is the LMS8001 Companion PCB?

It measures 75.9 × 96.1 mm and has 4 copper layers, 1.6 mm thick.

What parts does the LMS8001 Companion use?

1,071 parts, built around the AP7361-33E and NCR2-113+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LMS8001 Companion KiCad files?

From the myriadrf/LMS8001-Companion repository on GitHub, at the commit this page was made from: the board is hardware/2v1/KiCAD/LMS8001_Companion.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the LMS8001 Companion design in my own project?

Its repository states no licence, so its author keeps all rights: ask myriadrf before reusing the design.