Skip to the content

Open-source KiCad boards

4,164 match “NC”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers228.6 × 76.2 mmLa nc, the printed circuit board in 3D

    La nc

    subrezon/la_nc

    Inspired by keyboards like Planck, Lumberjack and Lesovoz, lanc aims to deliver a lightly split, ortho typing experience in a similar footprint, as well as an easy build process.

    97 parts20MIT
  • 2 layers167 × 103.2 mmLinTech GM board NC ACM-2.3, the printed circuit board in 3D

    LinTech GM board NC ACM-2.3

    nightgryphon/LInTech-network

    Reconstructing USSR school retro PC network by LInTech

    97 parts9Apache-2.0
  • 2 layers168.9 × 106.7 mmLinTech GM board NC ACM-2.2, the printed circuit board in 3D

    LinTech GM board NC ACM-2.2

    nightgryphon/LInTech-network

    Reconstructing USSR school retro PC network by LInTech

    79 parts9Apache-2.0
  • 2 layers118.7 × 103.8 mmPla nck, the printed circuit board in 3D

    Pla nck

    shanna/pla_nck

    A low profile split keyboard I built using Gateron KS-33 low profile switches.

    58 parts32
  • 2 layers135 × 97.8 mmNCL501, the printed circuit board in 3D

    NCL501

    roberto314/NCL501-SCSI-8-Bit

    Recreation of a bootable ISA 8-Bit SCSI Card.

    42 parts6
  • 2 layers349.4 × 131 mmNcr pcb, the printed circuit board in 3D

    Ncr pcb

    Aeonstrife/ncr-pcb

    QMK powered drop-in replacement PCB for the NCR80 keyboard

    204 parts4MIT
  • 2 layers74.2 × 87.1 mmNc1, the printed circuit board in 3D

    Nc1

    nietamten/VoltageConverterForSolar

    NCP1034 buck with regulated output voltage, output current, minimum input voltage

    76 parts4
  • 2 layers349.4 × 133 mmNCR80-ALPS SKFL, the printed circuit board in 3D

    NCR80-ALPS SKFL

    MaiTheSan/NCR80-ALPS-SKFL

    220 parts3
  • 4 layers33 × 45.7 mmNCP81161-PWMEN LFPAK33-breakout, the printed circuit board in 3D

    NCP81161-PWMEN LFPAK33-breakout

    crteensy/NCP81161-PWMEN-LFPAK33-breakout

    Breakout board for NCP81161 gate drivers with PWM and EN inputs and FETs in LFPAK33 like the PSMN1R8-30MLH

    59 parts1MIT
  • 2 layers90 × 100 mmNCL30160 Demo, the printed circuit board in 3D

    NCL30160 Demo

    TheColonelYoung/NCL30160_Demo

    Demonstration board for light control IC NCL30160.

    408 parts1GPL-3.0
  • 2 layers40 × 20 mmB NCP3334A 3V3-BRK R1.0, the printed circuit board in 3D

    B NCP3334A 3V3-BRK R1.0

    Boardoza/Boardoza_NCP3334A_3V3_Low_Dropout_Voltage_Regulator_Breakout_Board

    High-precision 3.3V low-dropout voltage regulator breakout board using onsemi NCP3334A, providing efficient and stable power up to 500 mA.

    14 partsCC-BY-SA-4.0
  • 2 layers55 × 47 mmNCV ShakeIt, the printed circuit board in 3D

    NCV ShakeIt

    jongarrison/NCV-ShakeIt

    This device is designed to turn on two relays (currently for a single two phase motor) after detecting that another AC device has shut off.

    16 parts
  • 4 layers200 × 120 mmNcv7240-driver, the printed circuit board in 3D

    Ncv7240-driver

    jussty/ncv7240-driver

    KiCad 8 PCB: 4x NCV7240 octal low-side drivers + ESP32-S3 + AP33772S USB-C PD EPR (24V)

    72 parts
  • 2 layers40 × 36 mmNCS199A3R test panel, the printed circuit board in 3D

    NCS199A3R test panel

    lfiack/gCollector

    Garbage collector robot for FreeRTOS Labs

    84 parts
  • 9 layers267 × 111.8 mmLightRail NCE, the printed circuit board in 3D

    LightRail NCE

    Lightiam/pacakge

    Complete PCB layout design for the LightRail AI NCE (Neural Computing Engine) motherboard, engineered to professional standards with controlled impedance and high-speed signal integrity.

    27 parts
  • 4 layers100 × 150 mmNCU, the printed circuit board in 3D

    NCU

    sebhalldesigns/NCU

    NCU (Network Control Unit)

    323 partsMIT
  • 2 layers72.9 × 71.1 mmAMS - CANBus - RGB - Nchannel, the printed circuit board in 3D

    AMS - CANBus - RGB - Nchannel

    TJLTM/Automotive-Monitoring-System-CANBus-Sensor

    What is this? --- when working on my AMS solution i kept putting more and more stuff into a single box and everytime i needed to make a change it was $200 for a board that may or may not work so i decided to make it…

    59 parts
  • 2 layers65 × 46 mmNcv1124, the printed circuit board in 3D

    Ncv1124

    rusefi/rusefi-hardware

    35 parts52
  • 2 layers37 × 14 mmNcv1124-micro, the printed circuit board in 3D

    Ncv1124-micro

    rusefi/rusefi-hardware

    27 parts52
  • 2 layers32 × 22 mmNcn26010 oaspi, the printed circuit board in 3D

    Ncn26010 oaspi

    dragonlock2/kicadboards

    Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

    59 parts14Apache-2.0
  • 2 layers18.8 × 11.4 mmNCP1400 powersupply, the printed circuit board in 3D

    NCP1400 powersupply

    Squantor/various_PCB

    Various little boards are added here like level shifters, oscillator breakouts and other simple PCB's. Most of these boards are breadboard plugin friendly.

    13 parts4MIT
  • 4 layers149 × 39 mmNC265 connector prototype, the printed circuit board in 3D

    NC265 connector prototype

    AxelMcKenna/AFX-1000

    RMX-1000-inspired effects processor for macOS, AU and VST3, built on a shared C++20 engine. Standalone Daisy Seed 3 hardware with two main PCBs and a custom housing is in development.

    6 parts1
  • 2 layers15 × 25 mmNCL30160 Demo Panelized, the printed circuit board in 3D

    NCL30160 Demo Panelized

    TheColonelYoung/NCL30160_Demo

    Demonstration board for light control IC NCL30160.

    17 parts1GPL-3.0

Parts matching “NC”

See them in the parts library