Skip to the content

Open-source KiCad boards

192 match “MG-5”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 4 layers180 × 120 mmMG ZS V2, the printed circuit board in 3D

    MG ZS V2

    damienmaguire/MG-EV-Inverter

    Reverse engineering of the drive motor and inverter used in MG Electric Vehicles

    177 parts17GPL-3.0
  • 4 layers34 × 37.3 mmMg gimbus, the printed circuit board in 3D

    Mg gimbus

    Every-Flavor-Robotics/motorgo-mini-hardware

    hardware files for motorgo mini

    102 parts12
  • 2 layers59 × 22 mmBuck converter automotive, the printed circuit board in 3D

    Buck converter automotive

    MG-5/buck-converter-automotive

    12V-to-5V buck converter for automotive purposes

    36 parts2MIT
  • 4 layers204 × 85 mmNixie clock, the printed circuit board in 3D

    Nixie clock

    MG-5/nixie-clock-hardware

    Hardware for controlling six Nixie IN-14 tubes as clock (HH:MM:SS)

    168 parts2MIT
  • 4 layers192 × 71.8 mmVfd clock, the printed circuit board in 3D

    Vfd clock

    MG-5/vfd-clock-hardware

    Hardware for controlling six VFD IV-17 tubes as clock (HH:MM:SS)

    130 parts1MIT
  • 2 layers65 × 71.5 mmAlarm clock v3, the printed circuit board in 3D

    Alarm clock v3

    MG-5/alarm-clock_hardware

    155 partsGPL-3.0
  • 2 layersLighthouse, the printed circuit board in 3D

    Lighthouse

    MG-5/lighthouse_led_pcb

    67 partsGPL-3.0
  • 2 layers174 × 12 mmLed bar, the printed circuit board in 3D

    Led bar

    MG-5/nixie-clock-hardware

    Hardware for controlling six Nixie IN-14 tubes as clock (HH:MM:SS)

    17 parts2MIT
  • 2 layers100 × 100 mmMgh80 proto, the printed circuit board in 3D

    Mgh80 proto

    Kris-Sekula/mgh80

    Simple 5 IC Z80 singe-board computer

    769 parts34
  • 4 layers121 × 78 mmBat Mgt Sys, the printed circuit board in 3D

    Bat Mgt Sys

    Stanislus29/analog-bms

    Analog BMS for Li-ion/Lipo batteries

    63 parts2MIT
  • 2 layers65 × 30 mmMGFieldHAT, the printed circuit board in 3D

    MGFieldHAT

    Zyzonix/mgfield

    Magnetic field measurement software (This software was developed for OCISLY - for more details, please contact OCISLY-ds) - Public dashboard available at https://dashboard.zyzonix.net/

    12 parts2GPL-3.0
  • 4 layers40 × 40 mmPWR MGR PCB, the printed circuit board in 3D

    PWR MGR PCB

    avbrahm/PWR-MGR-PCB

    Power Management PCB with USB-C

    64 parts
  • 4 layers69.7 × 116.7 mmStereoBoy MGB, the printed circuit board in 3D

    StereoBoy MGB

    larkins-andrew/StereoBoy

    sudo openocd -f interface/cmsis-dap.cfg -f target/rp2040.cfg -c "adapter speed 5000" -c "program blink.elf verify reset exit"

    275 parts
  • 2 layers71.4 × 138.1 mmMgBoard, the printed circuit board in 3D

    MgBoard

    periodboards/Magnesium

    A crappy 14 button macropad, 2 of which are rotary encoders

    116 parts
  • 2 layers100 × 100 mmMgh80, the printed circuit board in 3D

    Mgh80

    Kris-Sekula/mgh80

    Simple 5 IC Z80 singe-board computer

    218 parts34
  • 2 layers100 × 100 mmMgh80, the printed circuit board in 3D

    Mgh80

    Kris-Sekula/mgh80

    Simple 5 IC Z80 singe-board computer

    222 parts34
  • 2 layers39.3 × 28.1 mmDIY MGJ6, the printed circuit board in 3D

    DIY MGJ6

    NTURacingTeam/nturt_kicad_EP7

    33 parts
  • 2 layersRobot MGR, the printed circuit board in 3D

    Robot MGR

    rayvburn/diff_drive_mapping_robot

    ROS driver for the Raspberry Pi based differential drive robot

    95 parts27
  • 2 layers92.7 × 62.2 mmMgc, the printed circuit board in 3D

    Mgc

    0x007E/mgc

    MeGARCard - Development Platform

    121 parts
  • 2 layers33 × 48.9 mmMGC module, the printed circuit board in 3D

    MGC module

    0x007E/mgc_esp32

    MeGARCard - ESP32 Module

    49 parts
  • 4 layers56.3 × 66 mmFx mg100dfx, the printed circuit board in 3D

    Fx mg100dfx

    z2amiller/fx-mg100dfx

    A pedal port of the overdrive channel from the Marshall MG100DFX solid-state amp, built for a [PedalPCB forum request][post]. The +/-15V bipolar original is re-biased for single-supply operation.

    71 partsCERN-OHL-P-2.0
  • 2 layers50 × 50 mmReciever, the printed circuit board in 3D

    Reciever

    Safonovdv91/MG-Lap-Race-Timer

    Проект для отсечки времени ESP 32 Dev kit V1

    39 parts
  • 4 layers198.4 × 104.3 mmDC33, the printed circuit board in 3D

    DC33

    Maritime-Hacking-Village/Badge-2025

    Public repository for the official MHV 2025 badge.

    200 parts15CERN-OHL-W-2.0
  • 2 layers136.5 × 31 mmSdl breakout, the printed circuit board in 3D

    Sdl breakout

    kir486680/Open-Science-Bot

    Open-Science Electrochemistry Bot

    27 parts9

Parts matching “MG-5”

See them in the parts library